#1 Home Improvement Retailer

Internet # 100028725

Model # 914770

Store SKU # 914770

1 in. x 6 in. x 8 ft. Premium Kiln-Dried Square Edge Whitewood Common Softwood Boards Board

  • Meets the highest grading standards for strength and appearance
  • Ideal for carpentry, furniture, shelving and general finish work
  • For interior or exterior use - can be painted or stained
  • View More Details
Store
0 in stock

Product Details

About This Product

Every piece of 1 in. x 6 in. x 8 ft. Premium Kiln-Dried Square Edge Whitewood Common Board is perfect for a wide range of uses, from house framing to basic interior finishing applications. Uses include carpentry, hobbies, furniture, shelving and general finish work. With its easy to glue, good nailing and screw holding properties, this product meets the highest grading standards for strength and appearance. Its straight grain and uniform texture has low shrinkage and is easy to work by both hand and machine tools. In addition, it has great paint retention properties, making it fairly easily to treat with preservatives.

Highlights

  • Each piece of this lumber meets the highest quality grading standards for strength and appearance
  • Lumber can be primed and painted or sealed and stained
  • Highly recommended sealing red knots with shellac based sealer prior to priming and painting to prevent bleed through
  • For interior or exterior use
  • Common: 1 in. x 6 in. x 8 ft.; Actual: 0.75 in. x 5.5 in. x 96 in.
  • Weighs approximately 6 lbs.
  • Untreated premium lumber
  • Square footage coverage: 3.67 sq. ft.
  • Note: product may vary by store
  • Click to learn how to select the right lumber for your project
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 100028725

Model # 914770

Store SKU # 914770

Specifications

Dimensions

Actual Product Length (ft.)

8 ft

Actual Product Thickness (in.)

0.75 in

Actual Product Width (in.)

5.5 in

Coverage Area (sq. ft.)

3.66 sq ft

Nominal Product Length (ft.)

8 ft

Nominal Product Thickness (in.)

1

Nominal Product Width (in.)

6 in

Details

Appearance Board Type

Softwood Boards

Board Joint Type

Square Edge

Fastener recommendation

Nails, Galvanized Nails, Screws, Construction Adhesives

Features

Paintable, Stainable

Finish Type

Unfinished

Lumber Grade

Premium

Material

Wood

Moisture content

KDHT

Number Of Boards Per Pack

1

Texture

Smooth

Warranty / Certifications

Manufacturer Warranty

See store for details

Questions & Answers

19Questions
caret
Q:Does this board need to be conditioned before staining for outdoors?
by|Feb 15, 2023
1 Answer
Answer This Question

A:  no it does'nt , you can run a 120 grit sandpaper over it to lift the grains before staining but its not a must do.

by|Apr 19, 2023
    caret
    Q:Can I have it cut into 5 pieces 21-1/2 in. when I pick up?
    by|Jan 6, 2023
    2 Answers
    Answer This Question

    A:  I've found our Sherman Home Depot to be very friendly and accommodating. You are asking for of 107.5 " ( sounds like radio station number : ) of board. Lumber is measured by inches or feet so you convert to 8.958 feet. You will purchase a 10' (120") to get the cuts you need. The cuts themselves will take 1.25 -1.5 ' from the board. I cannot speak for HD but I would expect that they will do this for you. I also would be prepared to pay for the wood in advance and perhaps a small fee for the multiple cuts. That's just a guess. Give them a call and talk to the lumber department to set things up. Additionally, I'm guessing by the size that these may be for shelving. If they are to be painted I find that using a bare wood primer first makes the paint finish better.

    by|May 20, 2024
      1 found this answer helpful

      A:  yes the store can do that for you

      by|Jan 6, 2023
        caret
        Q:Do the boards need to be sanded before priming for closet shelves?
        by|Jul 14, 2022
        2 Answers
        Answer This Question

        A:  Yes. 

        by|Jul 15, 2022

          A:  If necessary, I would always sand and prime before painting to assure a long lasting finish. Mike

          by|Jul 14, 2022
          caret
          Q:Would this be a good product for fascia replacement/repair?
          by|Mar 31, 2022
          2 Answers
          Answer This Question

          A:  Would work if its covered with aluminum fascia. If painted the knots would bleed through. Better to use a finger joint 1x6 with no knots.

          by|Apr 5, 2022

            A:  yes as long as you paint or treat it with some sort of weather protection

            by|Apr 1, 2022
              Showing 1-4 of 19

              Customer Reviews

              4.1 out of 5

              • 4.1 out of 640 reviews
              • 79% recommend this product
              Filter by:
              Showing 1-10 of 640 reviews
              Kitchen Cabinets build
              This was just what I needed to face my cabinets with. Very few knots and no knots that were very big.
              by
              • Verified Purchase
              • Recommended
              Good experience
              Online service and pick up was quick and convenient. Wood was not warped or damaged. Very nice. Project turned out great.
              by
              • Verified Purchase
              • Recommended
              Installed as Baseboard throughout entire house. Great product!!
              Installed as Baseboard throughout entire house. Great product!!
              by
              • Verified Purchase
              • Recommended
              2 found this review helpful
              I've used this board for small projects around the house, keeping the wife happy. It fares well. ...
              I've used this board for small projects around the house, keeping the wife happy. It fares well. Wood is rather fragile though. I love it..
              by
                • Recommended
                1 found this review helpful
                I made a case for my CD/BOOKS. The wood is so pretty that I did not stain or paint it. Only bad t...
                I made a case for my CD/BOOKS. The wood is so pretty that I did not stain or paint it. Only bad thing is it rips easily.
                by
                • Verified Purchase
                • Recommended
                I bought this for a craft project...made name boards . Perfect for my project and a good value. W...
                I bought this for a craft project...made name boards . Perfect for my project and a good value. Will buy more.
                by
                • Verified Purchase
                • Recommended
                Perfect for its use.
                Perfect for its use.
                by
                • Verified Purchase
                • Recommended
                Good product
                Good product
                by
                • Verified Purchase
                • Recommended
                Excellent for small projects..
                Excellent for small projects..
                by
                • Verified Purchase
                • Recommended
                Smooth and cut easily
                Smooth and cut easily
                by
                • Verified Purchase
                • Recommended
                Showing 1-10 of 640 reviews

                Compare Similar Items

                current item

                Nominal Product Length (ft.)

                8 ft

                4 ft

                12 ft

                10 ft

                Board Joint Type

                Square Edge

                Square Edge

                Square Edge

                Square Edge

                Finish Type

                Unfinished

                Unfinished

                Unfinished

                Unfinished

                Nominal Product Thickness (in.)

                1

                1

                1

                1

                Coverage Area (sq. ft.)

                3.66 sq ft

                3.75 sq ft

                5.5 sq ft

                6.04 sq ft