#1 Home Improvement Retailer

Internet # 100085326

Model # 914827

Store SKU # 914827

1 in. x 8 in. x 6 ft. Premium Kiln-Dried Square Edge Common Softwood Boards

  • Meets the highest grading standards for strength and appearance
  • Ideal for carpentry, furniture, shelving and general finish work
  • For interior or exterior use - can be painted or stained.
  • View More Details
Store
0 in stock
caret
Product Details
  • Meets the highest grading standards for strength and appearance
  • Ideal for carpentry, furniture, shelving and general finish work
  • For interior or exterior use - can be painted or stained.
About This Product

Every piece of 1 in. x 8 in. x 6 ft. Premium Kiln-Dried Square Edge Whitewood Common Board provides you with the perfect solution for all your project needs. These boards combine the highest grade available in the market with unsurpassed quality of finish, making them ideal for any interior application. Well known for its excellent workability, easy nailing, screwing, glue holding and superb paint finish. Sourced from commercially grown tree farms, these forests are FSC certified, meaning they are managed on a completely renewable basis.

  • Each piece of this lumber meets the highest quality grading standards for strength and appearance
  • Lumber can be primed and painted or sealed and stained
  • Highly recommended sealing red knots with shellac based sealer prior to priming and painting to prevent bleed through
  • For interior or exterior use
  • Common: 1 in. x 8 in. x 6 ft.; Actual: 0.75 in. x 7.25 in. x 72 in.
  • Weighs approximately 7 lbs.
  • Untreated premium lumber
  • Square footage coverage: 3.875 sq. ft.
  • Note: product may vary by store
  • Click to learn how to select the right lumber for your project
  • Return Policy
Product ID #: 100085326Internet #: 098945051607Model #: 914827
caret

Specifications

Dimensions

Actual Product Length (ft.)6 ftActual Product Thickness (in.)0.75 in
Actual Product Width (in.)7.25 inCoverage Area (sq. ft.)3.62 sq ft
Nominal Product Length (ft.)6 ftNominal Product Thickness (in.)1
Nominal Product Width (in.)8 in

Details

Appearance Board TypeSoftwood BoardsBoard Joint TypeSquare Edge
Fastener recommendationNails, Galvanized Nails, Screws, Construction AdhesivesFeaturesPaintable, Stainable
Finish TypeUnfinishedLumber GradePremium
MaterialWoodMoisture contentKDHT
Number Of Boards Per Pack1TextureSmooth

Warranty / Certifications

Manufacturer WarrantySee store for details
caret

Questions & Answers

6Questions
caret
Q:does this wood contain tannins?
by|Jul 31, 2022
1 Answer
Answer This Question

A:  all plants and trees contains tannins. this wood is made with kiln dried Eastern White pine, which means its moisture content is in the 10 - 12% range . Tannins require moisture and water to propagate. Since these boards are kiln dried , you can say that there is virtually no significant tannins left inside.

by|Aug 25, 2023
    1 found this answer helpful
    caret
    Q:Can you use these for outdoor privacy screens?
    by|May 3, 2021
    7 Answers
    Answer This Question

    A:  Whitewood is a very soft wood compared to other species of trees such as oak, maple, or ash. Whitewood would not withstand exterior conditions in a cold climate for more than a couple of years, if that. Since you want privacy screens that will last more than a short time, use pressure treated lumber. Many popular dimensions of lumber are available at HD which are pressure treated, meaning that the pressure treatment process for the wood protects the wood from ground rot, and many insects.

    by|May 4, 2021

    A:  These are mostly PINE lumber, which will not last long outdoors. I would build a small section with just a few boards, PAINT IT OR STAIN IT WELL with proper exterior compounds, and see how it holds up. If you have success, then go for the larger project

    by|May 4, 2021

    A:  Absolutely! They are lighter than the 3/4 boards, I had to exchange them out for the heavier/ thicker ones on my gate because the other ones were too heavy. They worked great !!

    by|May 4, 2021

    A:  Sure but you need to stain or paint for outside use.

    by|May 4, 2021

    A:  You most certainly can use anything wood outside. I would not recommend this as it will rot rather quickly.

    by|Jan 15, 2024

      A:  Yes, it just needs to be painted or sealed, if the wood gets wet, it will warp and or rot

      by|May 4, 2021

      A:  I would say yes as long as you paint or stain before installation.

      by|May 4, 2021
      caret
      Q:can I use it on the outdoor fence?
      by|Sep 27, 2020
      5 Answers
      Answer This Question

      A:  You can but this wood is not treated so it would be susceptible damage by the outdoor elements. You can protect it with a sealant but it would be preferable to use treated wood for outdoor use.

      by|Sep 27, 2020

      A:  Pine boards like this do not last very long outdoors. Try redwood or cedar, and PAINT or STAIN your project to protect it from weather.

      by|May 4, 2021

      A:  Yes but they must be painted or stained/sealed

      by|May 4, 2021

      A:  Whitewood should not be used for fencing. It is too soft and rots easily.

      by|May 4, 2021

      A:  Yes, we just did that replacing the heavier ones (3/4") on our gate- they are lighter and worked great !

      by|May 4, 2021
      caret
      Q:Do you still offer to cut the boards down?
      by|Apr 4, 2020
      5 Answers
      Answer This Question

      A:  Yes, but it depends on what you mean by "cut the boards down" which determines how much they will do it for. Home Depot has the equipment to cut just about any "board" any way you like. Great service!

      by|Jan 9, 2024
      2 found this answer helpful

      A:  The store I shop will cut boards.

      by|Dec 6, 2022

      A:  I believe you will need to contact your local Home Depot with the current state of the world, Home Depot along with other essential stores are limiting contact with many and asking for people to be very careful and limited to necessary items.

      by|Apr 4, 2020

      A:  Yes, just yesterday I had a sheet of plywood cut in four 4x2 pieces

      by|Apr 4, 2020

      A:  Yes most of not all stores will cut these boards for you

      by|Apr 4, 2020
      Showing 1-4 of 6
      caret

      Customer Reviews

      4.2 out of 5
      • 4.2 out of 368 reviews
      • 88% recommend this product
      Filter by:
      Showing 1-10 of 368 reviews
      Love
      I’m a beginner when it comes to building, but decided to make a dining table and bench and the top stained really well, easy to use, and honestly beautiful!
      by
        • Recommended
        1 found this review helpful
        The wood was clean, smooth and straight. I didn’t have to sand it a lot before cutting and staini...
        The wood was clean, smooth and straight. I didn’t have to sand it a lot before cutting and staining it. It’s gonna make beautiful shelves.
        by
        • Verified Purchase
        • Recommended
        2 found this review helpful
        This lumber was perfect for building my shelves. Easy to work with and stained well. It also was ...
        This lumber was perfect for building my shelves. Easy to work with and stained well. It also was soft enough to easily accept screws and hardware without having to risk cracking and breakage. Would highly recommend.
        by
        • Verified Purchase
        • Recommended
        2 found this review helpful
        Made good shelving
        Made good shelving
        by
        • Verified Purchase
        • Recommended
        3 found this review helpful
        Nice cuts of pine. Very little knots. Between 1/4" -1/2" longer than 6' so I had to cut them dow...
        Nice cuts of pine. Very little knots. Between 1/4" -1/2" longer than 6' so I had to cut them down to make the 6'. I sand and stain them twice with Minwax English Chestnut stain to make very nice shelving.
        by
        • Verified Purchase
        • Recommended
        2 found this review helpful
        Nice piece of wood. Didn't even require any sanding. Used it to make a growth chart. Great projec...
        Nice piece of wood. Didn't even require any sanding. Used it to make a growth chart. Great project piece.
        by
        • Verified Purchase
        • Recommended
        2 found this review helpful
        The wood was used to construct a frame for a Halloween prop. The wood remained fairly straight a...
        The wood was used to construct a frame for a Halloween prop. The wood remained fairly straight and did not cup or otherwise warp when cut and assembled. No significant problems were noticed with the quality of the pine wood used for this project.
        by
        • Verified Purchase
        • Recommended
        2 found this review helpful
        Nice solid piece of wood! It worked so perfect for my project! No imperfections and/or issues whe...
        Nice solid piece of wood! It worked so perfect for my project! No imperfections and/or issues when cutting it.
        by
        • Verified Purchase
        • Recommended
        2 found this review helpful
        I purchased 3 of the 1" x 8" x 6' boards. My project required that I rip two of the boards to obt...
        I purchased 3 of the 1" x 8" x 6' boards. My project required that I rip two of the boards to obtain the shape pieces I needed for my project. In the process of ripping the boards they split do to internal stresses around knots. Fortunately I didn't have to waste much of the lumber but I did have to return to purchase Two 1x3 boards to finish my project,
        by
        • Verified Purchase
        • Recommended
        2 found this review helpful
        by
        • Verified Purchase
        Showing 1-10 of 368 reviews