
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Type NM-B (nonmetallic-sheathed cable) may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90 degree C (with ampacity limited to that for 60 degree C conductors) as specified in the NEC 1. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not subject to excessive moisture or dampness. Voltage rating for NM-B cable is 600-Volt.
Total Wire Length (ft.): 250 ft
Total Wire Length (ft.) | 250 ft |
|---|
Commercial/Residential | Commercial, Residential |
|---|---|
Conductor Material | Copper |
Features | Heat Resistant, Jacketed |
Gauge | 12 |
Grounded | Grounded |
Indoor/Outdoor | Indoor |
Jacket Color | Yellow |
Max Amps | 20 |
Number of Conductors | 3 |
Returnable | 90-Day |
Stranded or Solid | Solid |
Voltage (v) | 600v |
Wet Location Use | Dry |
Wire Cut Type | Pre-Cut Length |
Certifications and Listings | UL Listed |
|---|
@Jerry, Prices vary from retailer to retailer, geographically. You will need to contact your local retailer for price and available inventory. The exact information can be found on the retailer's website, https://www.homedepot.com/p/Southwire-15-ft-12-3-Solid-Romex-SIMpull-CU-NM-B-W-G-Wire-63947626/202525500. Consumer Support
No, you cannot use 12/3 wiring for an electric stove. Electric stoves require a dedicated circuit with higher amperage and voltage than a 12/3 wire can handle. They typically require a 40 or 50-amp circuit, and 12/3 is only rated for 20 amps. Using the incorrect wiring can create a fire hazard. For a stove, you'll likely need 6/3 or 8/3 wiring, but always consult local electrical codes and a qualified electrician to ensure proper and safe installation.
We'd be happy to assist you with this question. Please contact our wire and cable experts at CableTechSupport@southwire.com for assistance with this question.
No, you need to use direct burial cable designed for the project
This is not listed for direct burial. Please reach out to CableTechSupport@southwire.com for assistance.
Absolutely not.
20 Amps. We hope this helps!
Viewing 1-8 of 42
4.6 out of 5