DrillerToggle 1/8 in. x 2 in. Self‑Drilling Nylon/Zinc Toggle Anchor with Bolt 90 lb. (6-Pack)
- Heavy duty sharp cutting edge
- Can be use only on a none exterior wall
- Machine screw included for your convenience
- View More Details
Ask about this product
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Product Details
About This Product
These 1/8 in. x 2 in. Zinc-Plated Driller Toggles (6-Pack) easily screw into your drywall and require no drilling to hold up to 90 lb. of weight for your convenience. The DrillerToggle provides the holding power of a Toggle Bolt with the ease of installation of a WallDriller. The toggle action supplies extra holding power in drywall, while its self-drilling tip eliminates all the extra hassles and messes of installing a regular toggle anchor. The DrillerToggle's fine centered point helps guide the anchor into the wall with a flawless precision. Its sharp cutting edge reduces the force required to cut the material, and its powerful toggling mechanism holds tightly behind the drywall.
Highlights
- Fast & Easy to install
- Self-drilling anchors, no pre-drilling required
- All you need is a screwdriver
- Strong holding power
- Screw-in anchors for drywall with locking blades
- Standard thread
- Rust resistant
- 90 lbs weight capacity
- Learn more about drywall anchors here.
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Specifications
Dimensions
Anchor Diameter (in.) | 1/8" |
|---|---|
Anchor Length (in.) | 2 |
Details
Drive Style | Phillips |
|---|---|
Fastener Material | Carbon Steel |
Fastener Plating | Nylon |
Fastener Type | Toggle Bolts |
Fastening Base Material | Cinder Block, Drywall, Plaster, Wood |
Interior/Exterior | Exterior, Interior |
Maximum Weight Capacity (lb.) | 90 |
Measurement System | Inches |
Package Quantity | 6 |
Warranty / Certifications
Manufacturer Warranty | COBRA ANCHORS' WARRANTY SHALL BE TO REPLACE THE PRODUCT. |
|---|
Questions & Answers
good for plaster walls?
Hi! It cannot be used on plaster walls.
What's the diameter of the actual anchor?
Hi John! The DrillerToggle® anchor has an actual diameter of 0.5" (13 mm). Please don’t hesitate to consult us if you have any other questions. We invite you to consult our website www.cobraanchors.com where you will find all the technical specifications, video and installation guide.
What size is the screw?
The included screws are 1/4" x 3".
Do you have to screw the bolt all the way? Or can you leave half an inch out to hang something off?
Thank you for your recent inquiry with The Home Depot. You would want to fully install the anchor first then pull out the screw back out slightly to hang an item. We appreciate your business and look forward to serving you in the future
can you remove the machine screw and then re-install it? LIke if you need to take the item off the wall and then put it back up in the same place?
Hello! Yes, you should be able to remove the screw in this assembly and screw it back in. Thanks!
Would these be used with metal studs?
No, the DrillerToggle® is designed to be used in drywall only.
Can you use this on panel walls
Hello! The DrillerToggle is suitable for installation in drywalls. Thank you!
How do you remove these from wall?
Hi Luck, Option 1. 1- Remove the screw 2- Make sure the arrow on the anchor is positioned at 12 o’clock 3- Pry anchor out for about 1/5 an inch and push it back to flush with the wall. This should unlock the toggle wing behind the wall. 4- Repeat step 3 two or three times. 5- Wiggle the anchor to attempt to pull out of the wall. If this does not work, go to Option 2. Option 2. Push the anchor through the wall. The resulting hole will be slightly larger than the hole made when installing. Thanks.
Viewing 1-8 of 22
Customer Reviews
3.1 out of 5
5
733
4
150
3
88
2
114
1
649
Please feel free to reach out so we can better understand the issue, help resolve it, and ensure your project’s success.
We’re so sorry that the product did not meet your needs. We take great pride in our work, and our hope is always that it helps each one of our customers accomplish their goals. Clearly this was not your experience, and we apologize.
As we are always committed to improving our customer experience and products, please contact us at Cobra @ cobraanchors.com to further discuss your issues and potential solution.
– Cobra Anchors Customer Satisfaction Team
We’re so sorry that the product did not meet your needs. We take great pride in our work, and our hope is always that it helps each one of our customers accomplish their goals. Clearly this was not your experience, and we apologize.
As we are always committed to improving our customer experience and products, please contact us at Cobra @ cobraanchors.com to further discuss your issues and potential solution.
– Cobra Anchors Customer Satisfaction Team
We’re so sorry that the product did not meet your needs. We take great pride in our work, and our hope is always that it helps each one of our customers accomplish their goals. Clearly this was not your experience, and we apologize.
As we are always committed to improving our customer experience and products, please contact us at Cobra @ cobraanchors.com to further discuss your issues and potential solution.
– Cobra Anchors Customer Satisfaction Team
Loading Recommendations
Related Products
Toggle Lock 100 lbs. Philips Drywall Screws Anchors (10-Pack)
E-Z anchor toggle lock100 lbs. (10-Pack) self-drilling heavy-duty drywall anchors with screws (25-Pack) are great for installing shelving, mirrors, pictures and more. E-Z toggle lockis versatile for many applications and hangs up to 100 lbs. in wall (1/2 in. drywall) and 50 lbs. in ceiling. No pre-drilling necessary - install with only a #2 screwdriver.
1/8 in. x 2 in. Zinc-Plated Steel Mushroom-Head Toggle Bolt Anchors
These toggle bolts are anchors for use in hollow walls and hollow masonry applications. The toggle bolt's wing spreads the force over a larger load bearing surface and comes attached to a machine screw. Toggle bolts are single-use anchors and should be properly positioned prior to pre-drilling the hole.
1/4 in. x 2-1/2 in. HTB-3 Toggle Bolt Drywall Anchor with Zinc-Plated Phillips Head Screw (8-Pack)
The Hilti 1/4 in. Drywall Anchor with Phillips Flat Head Screws is a drywall fastening solution that is ideal for a variety of hollow wall materials in a wide range of thickness. The rounded edges for easy fit through the wall, the metal teeth to prevent spinning inside the wall, and the snap neck design all compliment a quick and easy installation. No setting tool is required, making your fastening project that much easier.
3/16 in. x 2-1/2 in. HTB-3 Toggle Bolt Drywall Anchor with Zinc-Plated Phillips Flat Head Screw (8-Pack)
The Hilti Drywall Anchor with Phillips Flat Head Screws is a drywall fastening solution that is ideal for a variety of hollow wall materials in a wide range of thickness. The rounded edges for easy fit through the wall, the metal teeth to prevent spinning inside the wall, and the snap neck design all compliment a quick and easy installation. No setting tool is required, making your fastening project that much easier.
