Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
The Homewerks Worldwide Slip x Slip Union is used to join lengths of pipe together. Can be used with either Sch. 40 or Sch. 80. It connects cold water pipes with solvent-weld connections. Rated for 150 psi at 73 Degree F, complies with ANSI B2.1.
Double Fitting Size | 1-1/2" x 1-1/2" |
|---|---|
Fitting 1 size | 1-1/2" |
Fitting 2 size | 1-1/2" |
Fitting Size Dimensions | 1-1/2" x 1-1/2" |
Product Length (in.) | 3.54 in |
Single Fitting Size | 1-1/2" |
Application | Water Supply |
|---|---|
Color Family | White |
Compatible Pipe Material | PVC |
Connection | Slip-Joint x Slip-Joint |
Connection 1 | Slip-Joint |
Connection 2 | Slip-Joint |
Connectivity | Threaded |
DWV | Dual Rated |
Features | Corrosion Resistant |
Fitting or Connector Type | Union |
Fitting/ Connector Collection | PVC |
Material | PVC |
Maximum working pressure (psi) | 150 |
Maximum Working Temperature (F) | 140 |
Pack Size | 1 |
Pipe or Fitting Product Type | Fittings & Connectors |
Returnable | 90-Day |
Schedule Type | Schedule 40 |
Manufacturer Warranty | 1 Year |
|---|
Hello, both statements are correct. The pressure rating at 73 degrees f is 150 PSI. If the temperature of the media increases the pressure rating drops. The max temperature rating is 140 degrees f. Two different statements. Thank you!
140 F is the upper limit where the integrity of the material begins to degrade. Above 73 F degrades the pressure handling capability. Neither of these are factors if PVC is not used in applications where it shouldn't be.
This union has threads on the inner portion that allow you to connect and disconnect the two slip-fit sides. The outer, larger ring is turned to loosen and tighten the connection.
Yup! I've been using these on my 18' above ground pool for ~3 years now. No leaks, each year I put o-ring grease on when I install the plumbing.
Don’t see any on mine…
yes
No. The direction depends on your situation.
It doesn't matter which end the flow is. There would be an arrow pointing to the Correct direction of flow.
No
A 1 1/2" PCV slip joint union means it will slip onto a 1 1/2" PCV pipe.
Hello, the dimensions mentioned on the photo reference the nominal pipe size.
You need 2 wrenches. 1 to open 1 to hold line so it doesn't break. If you tried this whoever installed it must have glued it together. Hope this helps.
I like to use a strap wrench on the large part and hold the other section with a pipe wrench or channel locks. It shouldn't be that tight.
No I don't think so, have them going in both directions with no leaks or flow loss.
No it is universal. Just remember the large ring it was needs to move and slide so make sure there is enough room on that side of the union so u can take apart down the road.
No, but if installing in a vertical application, then install it with the o-ring groove facing up so that the o-ring will stay in place.
No, it doesn't need to be installed in a certain direction at all. Just install it so that the disconnect is easy for you to access and turn.
No, either direction is fine
No this is a "slip" union. There are no threads. It has to be glued.
Hello Gary, Please contact us at 877-319-3757 and we would be happy to discuss this.
Yes, I installed on pool to allow for easy disassembly in the future. Worked fine with no leaks. I bought un threaded one and glued on. Make sure the threads will work for your situation.
I have learned that this union has unique threats. It is very frustrating that the threads are not standardized. Goo luck. Try it and return if it doesn’t work.
Yes. Worked for me intake and discharge.
Viewing 1-8 of 18
4.6 out of 5