
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Siemens GFCI circuit breakers are UL Listed and CSA Certified as Class A devices. These circuit breakers offer the new Self-Test and Lockout feature as required by UL 943, enabling the GFCI to automatically and continuously test itself to ensure that it is working properly. If it is detected that the device has been compromised, the device trips itself and locks out the homeowner from resetting the device, reducing the possibility of the homeowner incorrectly assuming that the device was tripped to prevent a ground fault.
Product Depth (in.) | 5 in |
|---|---|
Product Width (in.) | 2 in |
AIC Rating | 10 |
|---|---|
Breaker Type | Standard |
Connection Type | Pigtail |
Interruption Type | GFCI |
Maximum Amperage (A) | 30 A |
Mounting Type | Plug-On |
Number of Poles | Double |
Number of Spaces | 0 |
Pack Size | 1 |
Returnable | 90-Day |
Series Type | Not Specified |
Trip Unit | Electronic |
Voltage (V) | 120/240 V |
Certifications and Listings | UL Listed |
|---|---|
Manufacturer Warranty | Standard |
You can check it monthly.
Yes the SN2448B1100 will accept this QPF2 QF230A (2P, 30A GFCI Breaker) without any restrictions https://s3.amazonaws.com/dcc-data-extract/new-delta/asset/Compas/daily/Compas/Wiring%20Diagram/SIE_WD_LC_SN2448B1100.pdf
You will have to contact Cutler Hammer to see if Siemens QPF2 type breakers are UL listed for their panels.
Yes this unit accepts QPF2 (QF230A) type breakers
They can not be backfed. If you would like documentation that states this, please email productselection.us@siemens.com for us to provide this.
No the Siemens QPF2 breakers are not UL listed for SQD panels you will have to contact SQD to see what breakers are accepted in their panels.
Yes, the QF220AF type QPF2 breakers are approved for use with the W0816ML1125CU load center. The QPF2 breakers are newest version of type QPF breakers and are UL approved substitute for QPF breakers which are listed as acceptable for use on the W0816ML1125CU wiring diagram. If UL sub letter is needed, please send email request to productselection.us@siemens.com for GFCI UL sub letter to use QPF2 breakers where QPF breakers are listed and approved.
Yes this unit will accept 2 pole GFCI QPF2 breakers https://s3.amazonaws.com/dcc-data-extract/new-delta/asset/Compas/daily/Compas/Wiring%20Diagram/SIE_WD_W0816ML1125CU.pdf
Viewing 1-8 of 62
4.7 out of 5