#1 Home Improvement Retailer

Internet # 100003769

Model # 605189

Store SKU # 724084

23/32 in. x 4 ft. x 8 ft. Southern Pine Tongue and Groove Plywood Sheathing

Limit 90 per order
  • Plywood sub-floor panels
  • Provides stiffness and durability
  • Tongue and groove for an easy fit
  • View More Details
Store
0 in stock
caret

Product Details

Plywood provides durability, stiffness and versatility beyond alternative structural panels. Every piece meets the highest grading standards for strength and appearance. Combines sub-floor and underlayment in a single panel for easier installation. Use under wall to wall carpet and pad, hardwood flooring and vinyl tile. Made to withstand high impact and concentrated loads, plywood wears well under high traffic and heavy furniture. It provide smooth sanded surface.
  • Combines the performance requirements of sub-floor and underlayment panels in a single engineered panel
  • Smooth, sanded surface lets you install floor coverings directly to the sub-floor
  • Firm nails holding ability to help prevent loose fasteners in hardwood flooring
  • Holds up better than OSB under incidental wettings such as appliance overflows
  • Tongue and groove design so panels fit together quickly and easily
  • Wears well under high traffic and heavy furniture
  • Tongue and groove design helps you easily fit panels together
  • Effectively holds nails
  • Can be painted or stained
  • Note: Product may vary by store
  • 24 in. on-center span rating
  • Click to learn how to select the right lumber for your project
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

47Questions
caret
Q:Is this plywood suitable for outdoor use
by|Sep 25, 2023
1 Answer
Answer This Question

A:  Mean1255, This plywood sub-floor is not suitable for outdoor/exterior use permanently. It can be exposed temporarily to the elements, while installing. It requires finished flooring.

by|Sep 25, 2023
    caret
    Q:Does this have a paint ready sanded surface?
    by|Aug 9, 2023
    2 Answers
    Answer This Question

    A:  No. It will need to be sanded first. 

    by|Aug 15, 2023

      A:  R3D2, It is a construction sand. You will need to sand for a ready to paint sand.

      by|Aug 22, 2023
        caret
        Q:Do you realize the Manufacturers Spec claims the Width is 3' 11-1/2" while the Product Details claim 47.938"? Which width are you selling?
        by|Mar 14, 2023
        1 Answer
        Answer This Question

        A:  PDS4 ,The width is 47.938.

        by|Jun 9, 2023
          1 found this answer helpful
          caret
          Q:Could this T&G be used for 24" OC deck under cover that will be stained?
          by|Dec 9, 2022
          1 Answer
          Answer This Question

          A:  Karl, This sub-floor plywood is Exposure 1 grade and cannot be exposed to the elements permanently. We suggest using pressure treated or marine grade plywood for your exterior application.

          by|Jul 14, 2023
            1 found this answer helpful
            Showing 1-4 of 47
            caret

            Customer Reviews

            3.8 out of 5
            (256)
            • 3.8
              out of 256 reviews
            • 58% recommend this product
            Filter by:
            Showing 1-10 of 256 reviews
            Not 4’ wide
            Finished laying the floor for a 12x12 shed and the final board is over an 1.5” short. When you actually use the tongue and groove feature you lose about .75 inches per board. What’s the point of the tongue and groove!?
            by
              The guest representative cut the plywood pieces in half for...
              The guest representative cut the plywood pieces in half for me which was super helpful as I was fitting it between trusses. The cut was nice and straight too. the product was clean and easy to access inside a nice well lit Isle
              by
              • Verified Purchase
              Select these sheets yourself or you will get crap. I ordered 20 sheets to use as flooring in two...
              Select these sheets yourself or you will get crap. I ordered 20 sheets to use as flooring in two 40' insulated shipping containers, to cover the gaps in the floor rails. I did not select these myself, because I would have passed over about 17 of the 20 that were delivered. At over $31 a sheet I expect better quality. These are not worth $15 a sheet. Look, this ain't my first rodeo, I know there is a good side and a bad side on most sheets of plywood. But these have a bad side and a worst side. Knots, voids, cracks, and inclusions on both sides. And damage to the tongue and grooves that had to be fixed before trying to put them down. On top of that, these sheets were so wet that flies were landing on them to drink up the moisture on the surface. And the sheets delivered on Nov 8, 2019 were stamped April 2018. You'd think that they should have been dried out after 18 months. The photos I nave attached are of the best side. Bottom line is, do not simply order online for delivery from Home Depot and expect them to pick out good products for you. You will get the top of the stack no matter the condition. Go there and sort through them yourself if you want something decent. This delivery was crap.
              by
                9 found this review helpful
                Needed 14 sheets, got them home and noticed that that all had a bow to them. Thought if I layed t...
                Needed 14 sheets, got them home and noticed that that all had a bow to them. Thought if I layed them all in a flat pile that they might flatten out some. Not a chance after 10 days or so went to put it pdown and still the same. Had to go and get some ramset nails to hold it down, to the floor so the liquidnails could sets up. Not sure if it is a product problem, a storage problem, or a shipping problem. This is a problem I've noticed with alot of the lumber twisted, bowed or warped
                by
                • Verified Purchase
                3 found this review helpful
                tongue
                The tongue and groove slides up when clocked together. 1/32” or so, but its apparent and needs to be sandwd flat before adding flooring causing addwd work
                by
                  • Recommended
                  7 found this review helpful
                  Product was undamaged, smooth (for subflooring) and limited knots and voids. Quality product.
                  Product was undamaged, smooth (for subflooring) and limited knots and voids. Quality product.
                  by
                  • Verified Purchase
                  • Recommended
                  by
                  • Verified Purchase
                  by
                  • Verified Purchase
                  The only problem I had was trying to find someone that works there to help Lee and to ask questions..
                  by
                  • Verified Purchase
                  It was so good, I'm ordering more right NOW!...
                  It was so good, I'm ordering more right NOW!
                  by
                  • Verified Purchase
                  Showing 1-10 of 256 reviews