#1 Home Improvement Retailer

Internet # 206821410

Model # 19837

Store SKU # 657865

3/8 in. x 4 ft. x 8 ft Sheathing Plywood (Actual: 0.344 in. x 48 in. x 96 in.)

Limit 90 per order
  • Manufactured for strength and performance rather than aesthetics
  • Lighter weight than other types of sheathing products
  • Can be cut, drilled and routed with ordinary tools
  • View More Details
Store
0 in stock
caret

Product Details

Don't judge this product by its cover. Plywood sheathing may not look pretty, but it sure is useful. This product is strong, durable and when finished properly, performs for the life of your project.
  • 3-ply plywood construction
  • Can be nailed directly to framing - wall studs and roof or floor joists
  • Recommended for projects where knots, splits and knot holes are acceptable or for use under drywall, roofing materials and flooring
  • Not recommended for exposed applications or applications where beauty is required
  • NAUF (no added urea formaldehyde) water-resistant phenolic resin
  • Manufactured to construction and workmanship requirements for grade, veneer and panel thickness, as outlined in the (APA) - The Engineered Wood Association's Product Standard 1-09
  • Product is not sanded
  • Storage in a warehouse or under roof is recommended prior to use; if stored outdoors, units should be off the ground and covered loosely with some type of protective material
  • Click to learn how to select the right lumber for your project
  • Return Policy
  • California residents
caret

Specifications

caret

Questions & Answers

46Questions
caret
Q:How much is for bulk
by|Aug 9, 2023
1 Answer
Answer This Question

A:  Hello. Thank you for your question. Please check with your local Home Depot for current bulk pricing.

by|Aug 10, 2023
    caret
    Q:what is the weight of this product
    by|Aug 7, 2023
    1 Answer
    Answer This Question

    A:  Hello. Thank you for your question. A single sheet of this item weighs approximately 30lbs.

    by|Aug 7, 2023
      caret
      Q:What type of pressure treatment used for exterior, wet conditions, plywood?
      by|Apr 30, 2023
      1 Answer
      Answer This Question

      A:  Hello. Thank you for your question. This panel is not treated.

      by|May 2, 2023
        caret
        Q:When will this size be back in stock?
        by|Apr 18, 2023
        0 Answer
        Answer This Question
        Showing 1-4 of 46
        caret

        Customer Reviews

        3.6 out of 5
        (182)
        • 3.6
          out of 182 reviews
        • 53% recommend this product
        Filter by:
        Showing 1-10 of 182 reviews
        Voids and delaminating after installing
        After spending a few hours installing this all over our floors as part of our remodel, huge bubbles started popping up all over the top of the plywood. Had to spends hours removing all the screws from the flooring and replace it with a different material. They did not let us get a refund even though the boards were such terrible quality. Warning you now. Do not waste your time and money!!!
        by
          1 found this review helpful
          I bought this plywood to rip into strips and use as spacers in built-up beams. Discovered huge vo...
          I bought this plywood to rip into strips and use as spacers in built-up beams. Discovered huge voids in middle ply when I cut the sheets. Not worth buying.
          by
            9 found this review helpful
            Perfect for what needed, smooth on both sides, nice and flat and without knots.
            Perfect for what needed, smooth on both sides, nice and flat and without knots.
            by
            • Verified Purchase
            • Recommended
            The 3/8 CDX plywood was everything that I could expect from CDX plywood. There was a little bit ...
            The 3/8 CDX plywood was everything that I could expect from CDX plywood. There was a little bit of curl in the sheets but that is a rather typical problem with this thickness and grade of plywood. All in all it more than exceeded my expectations.
            by
            • Verified Purchase
            • Recommended
            2 found this review helpful
            Product had an abnormal amount of knots and general poor overall quality. This was normal in the ...
            Product had an abnormal amount of knots and general poor overall quality. This was normal in the entire lot available at the local store.
            by
            Response from Roseburg Response TeamJun 22, 2018
            Hi there, sheathing panels are manufactured to performance based standards, not for the face and/or back appearance. The primary end uses for sheathing are flooring, roofing and wall siding where eventually the panels are covered and the look of the panel is not important.

            For a more visibly appealing panel, sanded plywood is a structural panel with the face sanded smooth in the manufacturing process. The high grade of face veneers and the smooth sanded surface make sanded plywood an ideal panel for a variety of applications where appearance is important. Roseburg
            • Verified Purchase
            5 found this review helpful
            Plywood was satisfactory as it was 4x8x3/8(+/-). Came with way to many knot imperfections. Originally was looking for "AC" 3/8..lolol. Not
            by
              Not as clean as I would have expected.
              by
              • Verified Purchase
              by
              • Verified Purchase
              by
              • Verified Purchase
              by
              • Verified Purchase
              Showing 1-10 of 182 reviews

              Compare Similar Sheathing Plywood

              15/32 in. x 4 ft. x 8 ft. 3-Ply RTD Sheathing19/32 in. x 4 ft. x 8 ft. Rtd Sheathing SypTop Rated23/32 in. x 4 ft. x 8 ft. RTD Sheathing Syp
              current product
              3/8 in. x 4 ft. x 8 ft Sheathing Plywood (Actual: 0.344 in. x 48 in. x 96 in.)
              Brand
              Name15/32 in. x 4 ft. x 8 ft. 3-Ply RTD Sheathing19/32 in. x 4 ft. x 8 ft. Rtd Sheathing Syp23/32 in. x 4 ft. x 8 ft. RTD Sheathing Syp3/8 in. x 4 ft. x 8 ft Sheathing Plywood (Actual: 0.344 in. x 48 in. x 96 in.)
              Price
              $2820
              Buy 72 or more $25.38
              $3437
              Buy 58 or more $30.93
              $3770
              Buy 48 or more $33.93
              Ratings
              (1295)
              (1104)
              (756)
              (182)
              Nominal Product Thickness (in.)15/3219/3223/323/8
              Nominal Product Length (ft.)8888
              Nominal Product Width (ft.)4444
              Plywood FeaturesPaintablePaintablePaintable, StainableNo Additional Features
              Exposure DurabilityInteriorInteriorExposure 1Exposure 1
              Panel/Veneer GradeRated SheathingRated Sheathing Rated Sheathing
              Span Rating32/1640/20 24/0
              View ProductView ProductView ProductView Product