15 Amp 10 in. Heavy-Duty Worm Drive Table Saw Corded Electric with Stand SKILSAW Blade

I really wanted to give this a 5 star review but for cutting purposes, I give it a one star. I just purchased this SPT 99-11 brand new on Jan 26, 2026. I had high hopes for this saw but was let down immensely. The table saw itself is great and all of the functionality is excellent. However, the blade wobbles or vibrates something fierce! I purchased 4 brand new blades and they all wobble and the cuts are awful which ends up making more work for me because now I have to sand the cut to get rid of the saw tooth marks. I bought a brand new 24 tooth Dewalt ripping blade and it wobbles. Not as bad as the one that came with the saw but still very noticeable. I then bought 3 new CMT Chrome blades. One 40 tooth 1/8th kerf all purpose, one 60 tooth 1/8 kerf, and one 80 tooth 1/8 kerf. CMT blades are very well known in the industry for precision blades at a medium price. But when all 3 of them wobble and vibrate? I checked the cleanliness of the arbor and nuts and made sure the blade was clean as well before mounting on the saw. It is still awful. I can even hear the wobble as the saw blade is slowing down with a piece of wood still in the groove. The fence is square to .001 and the riving knife is adjusted perfectly as well. I am very disappointed in this SPT 99-11 and wished I would have purchased the DeWalt DWE7491RS. My friend has that one with the CMT blades and it cuts smooth as butter, no post sanding required!

Not Impressed

I needed a portable table saw. My shop table saw weighs 450#, not exactly portable. The Skill worm drive table saw has handled my needs perfectly. Cuts a accurate. I was surprised at how well it cuts. I did install a 90 tooth blade for finer cuts. Hope it last will last as long as my Skillsaw hand held saw that is 50 years old and still going strong.

Excellent piece of machinery,

I researched all brands heavily before purchase and this saw definitely seemed like the highest quality and well thought out design. I was not disappointed when I unpacked it and set it up. Everything seemed as advertised. This would certainly be a 5-star review if not for these two issues: [1] The measuring guide is inaccurate. Off by +- 1/4" when compared to any standard ruler. [2] It broke on my first project. I was ripping a small piece of maple 5x2x14 and the mounting bracket that the riving knife is bolted to broke. That bracket is part of the cast-aluminum motor housing so it looks like the motor will need to be replaced. I will know more when I call for service on Monday.

Excellent Saw but had to make adjustments right out of box. Therefor only 4 stars.

I don't have the space for a permanent free-standing floor model so this jobsite portable saw is a good fit. I can collapse the stand and roll it under a bench or I can stand it on end and set it against the wall. The 16" wheels makes it easy to move it on stairs, across the lawn or gravel driveway. One complaint about the stand is that it doesn't have rubber protectors where the metal stand touches the floor or ground when in the collapsed position. I will have to cut some rubber hose to slip over the metal tubes. The rip fence has T-slots on the sides but the ends of the slots are blocked so there is no way to insert a bolt head or nut into the slot. I will have to temporarily remove one end of the rip fence to expose the end of the T-slots in order to insert the square nuts. I was making a bevel rip cut and wanted to use the T-slot to attach a taller auxiliary fence onto which I could clamp a feather board to hold the wood tight to the table. The edge of the table lacks a suitably flat underside to which to clamp a feather board to hold the wood tight to the fence. The ribs and other castings on the underside are not all on the same plane so a tong wood filler block to span across them cannot be used. I had to cut a filler block of wood small enough to fit between the metal cast ribs on the underside of the table. I will have to cut notches into a long wood filler block for the ribs and other castings to allow the block to sit tight to the underside of the table.

This saw is super powerful and is a major upgrade from my Rigid. Rips thru 8 quarter walnut like butter and the rack and pinion fence is very accurate. Wish I would have bought this saw along time ago

Smooth and precise cuts and very portable.

I gave 4 stars cause the mesurement is off passed 7 to 9 inches it gets wrong .. just a tape . They should fox it and send customer a new tape to install Other than that its a great saw.