Exclusive

Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
The advanced Self-Priming 1-Part Epoxy Concrete and Garage Floor Paint is ideal for interior and exterior concrete floors. It resists peeling caused by hot tires. It provides a stain, chemical and weather resistant finish.

Container Size | 1 Gallon |
|---|---|
Coverage Area (sq. ft.) | 500 sq ft |
Application | Concrete Basement & Garage |
|---|---|
Application Method | Brush, Paint Sprayer, Roller |
Base Material | Epoxy |
Color Family | Gray |
Color/Finish | Concrete Sidewalk |
Dry To Touch Time (hh:mm) | 01:00 |
Epoxy Type | 1 Part Epoxy |
Hexadecimal Value | 8D8A81 |
HSL Value | 45.0:5.0:52.9 |
Interior/Exterior | Exterior, Interior |
Kit | No |
Maximum Optimal Temperature (F) | 90 |
Minimum Optimal Temperature (F) | 50 |
Number per Package | 1 |
Paint/Stain Clean Up | Soap & Water |
Paint/Stain Features | Chemical Resistant, Driveable Surface, Durable, High Foot Traffic, Mildew Resistant, Paint & Primer in One, Prevents hot tire pickup, Stain Resistant, UV/Fade Resistant, Washable |
Recommended Number of Coats | 2 |
Returnable | Non-Returnable |
RGB Value | 141:138:129 |
Sheen | Satin |
Stain & Sealer In One | No |
Substrate/Surface Material Use | Brick, Concrete, Stone |
Surface Location | Basement Floor, Driveway, Garage Floor, Patio, Pavers, Pool Deck |
Time before recoating (hours) | 4 |
Transparency | Solid |
Vertical/Horizontal | Horizontal |
Manufacturer Warranty | Limited Warranty |
|---|
Hi Amber, thanks for reaching out. Yes, you can mix our Anti-Slip Floor Finish Additive to our 1-Part Epoxy Floor Paint. Have a great day! -Christina
Hi David, thanks for your question. We recommend letting the coating dry for at least 72 hours before resuming normal foot traffic. Enjoy the rest of your day! -Christina
Hi Glen, thanks for the question. Typically etching is done using muriatic acid or other chemical solution, by applying it to the surface, letting it work and then rinsing thoroughly. I'd suggest checking with your local home improvement store for an etching product. If you have additional questions about your project, please reach out to us directly. Our customer care team is happy to help. -Ronald
Hi Debra, thanks for your question. We don't recommend using our 1-Part Epoxy Paint over a wood surface, as this product is only designed for concrete & masonry. Enjoy the rest of your day. -Christina
Hi House, thanks for reaching out. We don't recommend using our 1-Part Epoxy Paint over a wood surface, as this product is only designed for concrete & masonry. Enjoy the rest of your day. -Christina
Hi Rolando, thanks for reaching out with your question. If the floor leveler is cement-based, our 1-Part Epoxy should be okay to apply over it once it’s fully cured. However, I would still check with the floor leveler manufacturer to see if it is paintable. If you have further questions or concerns, feel free to reach out to us directly; we are always happy to help. -Angie
Hi Cassandra, thanks for your question. We don't recommend using our 1-Part Epoxy Floor Paint on vertical surfaces. Instead, you can use one of our exterior wall paints, such as our Premium Plus Exterior paint. Good luck with your project! -Christina
Viewing 1-8 of 1126
3.8 out of 5