Best Seller
Black Friday
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
The 6-piece Husky 1/4" Drive Impact Driver Socket Adapter Set is a must-have for a DIY or professional's tool box. This driver socket adapter set is designed to be used with impact drivers and sockets, these impact drill adapters work on 3 different drive sizes of standard and deep sockets (1/4 in., 3/8 in., and 1/2 in. drives). For strength and durability, they are made of heat-treated steel and offer a black oxide coating for corrosion resistance. The impact socket driver adapter set quickly converts any power drill or 1/4 in. impact driver into a socket driver to quickly tighten or remove fasteners. This set offers both 2.5 in. and 6 in. adapters for all 3 drive sizes plus a plastic storage caddy to keep the socket adapters together and organized.
Hand Tool Type | Socket/Ratchet Adapter |
|---|---|
Individual/Set | Set |
Number of Pieces | 6 |
Returnable | 90-Day |
Tools Product Type | Hand Tool |
Manufacturer Warranty | Lifetime Warranty |
|---|
Jaxon, Yes, these are designed to work with a 1/4 inch impact driver and impact sockets.
Findog, these are designed to work with a 1/4 inch impact driver and impact sockets. They will not interface with the square anvil of a breaker bar.
BFH4, No, this set is not magnetic. It has a ball detent to secure the socket and a groove on the opposite end that works with impact drivers.
BFH4, No, this set is not magnetic. It has a ball detent to secure the socket and a groove on the opposite end that works with impact drivers.
Hey JakeDrake, All Husky tools carry a lifetime warrant, either return it to the store or call Husky Customer Care at 1-888-HD-HUSKY (1-888-434-8759). Thanks!
I honestly don't know. Check the packaging it came in or visit the store to see if the manufacturer offers any type of warranty. Most drill and impact drivers do not generate enough torque to cause the socket adapter to break so either the manufacturer or HD may consider a replacement. If there are tool marks or other signs of customer abuse you should own up to it and forget it.
yes
Sure. They all have a 1/4 inch shank!
yes I’m sure you can.
These adapters are made for use with an impact driver but can be used with an ordinary drill. Not sure what is meant by non-power wrench.
If the ratchet has a 1/4" female hex drive, then yes. I have a small ratchet and ratcheting screwdrivers that work well with these. But, be aware that on any tool without a quick- release chuck, these extensions will not seat deeply, and the only thing holding the extension in will be the magnet (or snap ring) in the drive tool, if it has one.
Hey SB6, Any impact socket is fine to use with their respectively sized manual drive tool. It is only dangerous going the opposite way and using a chrome socket on an impact. Thanks!
Viewing 1-6 of 6
4.8 out of 5
