
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
The Everbilt 80in. Heavy Duty Hang Track is designed with speed and ease of installation in mind. Simply install by leveling the hang track and securing directly to wall studs. Complete the installation by adding vertical rails, brackets and wire shelving (all sold separately). Works best when paired with the Heavy Duty adjustable hardware system.
Product Length (in.): 80 in
Product Length (in.) | 80 in |
|---|
Accessory Type | Track/Rail |
|---|---|
Bracket Type | Track Bracket |
Color Family | White |
Color/Finish | White |
Compatible With Material | Metal/Wire |
Features | No Additional Features |
Included | Hardware |
Material | Steel |
Number of Brackets | 0 |
Package Quantity | 1 |
Returnable | 90-Day |
Storage Product Type | Hardware |
Manufacturer Warranty | 5 years |
|---|
not sold separately. Only when ordering the genevieve systems it comes with.
yes. The one hangtrack secured into studs will carry the load
This is not designed for that purpose
The slit allows this to work with the two most popular rail systems sold in the US today
there are concrete anchors sold in the bay
It does not. Hardware is sold separately
No
same product just in 2 different locations in the store. Wood shelving and wire shelving. Two model numbers to make sure each location gets ordered properly. Hope this helps.
Thank you for pointing that out! The installation instructions can be found on the 80" version's product page. You can also find the instructions on the manufacturer's website.
Thank you for pointing this out! Installation instructions can be found on the 80" version of this product listing. You can also find the installation instructions here: * **For Stud Installation:** Secure to the wall with #12 x 2 in. pan head screws directly into studs. * **For Concrete Installation:** Drill 1/4 in. holes and insert #12 wall anchors. Secure to the wall using #12 x 2 in. pan head screws. * **For Drywall Installation:** Drill 1/2 in. holes. Remove toggle from bolt and insert bolt through the track. Then, re-attach toggle to bolt and insert toggle into wall. Tighten bolt to secure to the wall. **Installation Steps:** 1. **Install Hang Track:** At desired height, level hang track with overhang positioned at top. Mark hole locations every 16 in. for studs and every 8 in. for concrete or drywall. Secure to wall. 2. **Install Standards:** Locate notched end of standard. Place standard onto hang track so notch fits over bottom rail. Space standards no more than 24 in. apart. 3. **Install Brackets:** Insert brackets into standards at desired heights. 4. **Install Shelving:** Position shelf so bracket nose fits between wires on front of shelf. Push shelf back and position back wire behind hooks on back of brackets. Press shelf down to lock into place. 5. **Secure Standards:** Locate and mark hole closest to center point of EACH standard. Swing standard to one side (DO NOT PULL STANDARDS AWAY FROM WALL) and drill hole. For concrete and drywall walls, install anchor or toggle. Reposition standard back over hole and secure to wall.
Viewing 1-8 of 28
4.7 out of 5

