#1 Home Improvement Retailer

Internet # 316519151

Model # SID22030

Product Images

1/2 in. Drive x 1-3/16 in. 6-Point Impact Socket

$10.48
  • Has high-visibility laser markings and permanent stamped markings
  • Meets a minimum of 1.3 times the ANSI standard for proof torque
  • Works with both friction ring anvils and detent pin anvils
  • View More Details

Free & Easy Returns In Store

Return this item within 90 days of purchase.

Read Return Policy

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

Tekton shallow impact sockets have 2-size markings-both a high-visibility laser marking and a permanent stamped marking. The interior well of the socket extends fully into the socket, which allows for better fastener engagement in more situations. Each socket works with both friction ring and detent pin anvils. Smooth walls without grooves support friction ring engagement, and a detent pin hole on one side allows you to decide whether to engage the pin. Radiused corners on the socket prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners. Part by part, we choose the best combination of steel alloys, heat treating specifications, and forming processes to meet the highest performance requirements. This socket has a corrosion-resistant manganese phosphate coating.

Highlights

  • 2-size markings - the size is marked in two ways on every socket-both as a high-visibility laser marking and a permanent stamped marking
  • Full-length socket well - while the overall socket is a shallow length, the interior well extends fully into the socket, which allows for better fastener engagement in more situations
  • Works with friction ring or detent pin anvils - smooth walls inside the drive end and a detent pin hole make the sockets compatible with both drive tool anvil types
  • Prevents fastener round-off - radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners
  • High-performing steel alloys - this socket is made from 50bv30 chromium-vanadium (cr-v) and has a corrosion-resistant manganese phosphate coating
  • Socket End Diameter: 1.66 inches
  • Drive End Diameter: 1.66 inches
  • Return Policy

Product Information

Internet # 316519151

Model # SID22030

Additional Resources

Shop All TEKTON
From the Manufacturer

Specifications

Dimensions

Drive Size

1/2 in

Socket Size

1-3/16 in

Details

Color Family

Multi-Colored

Hand Tool Type

Individual Socket

Individual/Set

Individual

Material

Steel

Measurement Standard

SAE

Number of Pieces

1

Points

6-point

Returnable

90-Day

Socket Depth

Shallow

Socket Type

Impact Socket

Tools Product Type

Hand Tool

Universal

Non-Universal

Warranty / Certifications

Manufacturer Warranty

No time limits, no receipts: tekton.com/tool-help

Questions & Answers

Can this be used manually and not with an impact driver?
ByJun 10, 2025
1 Answer | 
Answer This Question

This is Mark from Tekton. Yes, this impact socket will work with a hand ratchet or breaker bar. However, we recommend using hand drive sockets with hand ratchets and impact sockets with impact drivers. The equivalent 1/2 Inch Drive x 18 mm 6-Point hand drive socket is SHD22118.

By|Jun 11, 2025


    Does this socket fit a generic M18 hex-head bolt?
    ByJun 4, 2025
    1 Answer | 
    Answer This Question

    This is Mark from Tekton. Yes, this 27mm socket should fit standard M18 hex bolts as their head size is 27mm measured across the flats.

    By|Jun 5, 2025


      What's the interior depth of this socket?
      ByAug 1, 2024
      2 Answers | 
      Answer This Question

      Mark from Tekton is incorrect. The interior depth of the socket is 0.75". I used Mark's answer to buy this socket since I needed a socket that had an interior well depth of 0.9". Upon delivery, I found the useable, interior depth was only 0.75".

      By|Oct 1, 2026

        (1)

        This is Mark from Tekton. This socket has an interior well depth of 0.9 inches and is 1.97 inches long overall.

        By|May 5, 2025

          (1)

          Where is this product made?
          ByJun 15, 2023
          1 Answer | 
          Answer This Question

          This is Mark from Tekton. We manufacture this socket in Taiwan.

          By|Jun 16, 2023


            Viewing 1-4 of 4

            Customer Reviews

            4.9 out of 5

            • 4.9 out of 130 reviews
            • 100% recommend this product
            Filter by:
            Showing 1-10 of 130 reviews
            Tekton 1/2 drive 18mm shallow impact socket was perfect! 6 points reduces the chance of slipping or stripping nuts and bolts. Used it to fill the skips in my pittsburgh set.
            by
            Smaller size for Milwaukee box 1/2 impact
            Tekton coming to the rescue with singles. I bought a 10-24 mm set but I work on calipers so I needed a 8mm because those brake calipers bolts can get seized up due to the michigan winters. This also comes with lifetime warranty and tekton warranty is the easiest to work with as always. I decided to buy from Home Depot because of free shipping. With tekton you have to meet a minimum price of around 35 for free shipping. The material is very quality and looks very nice with gold numbers. These are my go to everyday
            by
              • Recommended
              This customer chose to rate the product and not provide text.
              by
              I used this socket to torque the main shaft gear on my Delorean gearbox to 135nm no problem. I will use this to tighten the rear hub nut to 370nm next
              by
              • Verified Purchase
              This customer chose to rate the product and not provide text.
              by
              • Verified Purchase
              This customer chose to rate the product and not provide text.
              by
              • Verified Purchase
              very good fit on the nut I needed it for while working on my motorcycle primary drive. absolutely no slippage. would definitely recommend and will by more sockets from this brand if the need arises.
              by
              • Verified Purchase
              This customer chose to rate the product and not provide text.
              by
              • Verified Purchase
              This customer chose to rate the product and not provide text.
              by
              • Verified Purchase
              This customer chose to rate the product and not provide text.
              by
              • Verified Purchase
              Showing 1-10 of 130 reviews

              Compare Key Features

              current item

              Product Snapshot

              Built for impact tools, this 6-point impact socket with laser-etched markings ensures precise fit and lasting durability.
              Built for impact tools, this deep socket features laser-etched markings for easy identification. Ideal for reaching recessed bolts.
              Built for pros: high-performing Cr-Mo steel impact socket with laser-etched markings for easy identification.
              Built for impact tools, this socket features laser-etched markings and a durable steel construction for long-lasting performance.

              Drive Size

              1/2 in
              1/2 in
              1/2 in
              1/2 in

              Socket Size Range

              1-3/16 in
              1-1/4 in
              1-5/8 in
              1-3/8 in

              Material Composition

              Steel
              Steel
              4140 chromium-molybdenum (Cr-Mo) steel
              Steel

              Finish Coating

              Manganese phosphate

              Impact Rated