#1 Home Improvement Retailer

Internet # 321032559

Model # 2811-20-49-56-9295

Product Images

Exclusive

M18 FUEL 18-Volt Lithium-Ion Brushless Cordless GEN 2 SUPER HAWG 7/16 in. Right Angle Drill w/9pc PACKOUT Hole Saw Kit

Limit 5 per order
$679.00
Apply Now
Pay $629 after $50 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card
  • Generates Corded Power. As Fast As Corded.
  • Delivers Up to 100 2-9/16" Holes Per Charge
  • Part of the M18 System, featuring over 250+ tools
  • View More Details

Free & Easy Returns In Store or Online

Return this item within 90 days of purchase.

Read Return Policy

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

The MILWAUKEE M18 FUEL SUPER HAWG Right Angle Drill with QUIK-LOK delivers the next generation of ground-breaking performance with the power and speed to replace corded right angle drills. The cordless right angle drill is designed from the ground up to generate corded power, work as fast as the corded competition, and provide users with up to 100 2-9/16" holes through 6" beams per battery charge on an M18 REDLITHIUM HIGH OUTPUT 6.0AH battery. The Milwaukee SUPER HAWG features the POWERSTATE Brushless Motor, optimized REDLINK PLUS electronics, and is powered by REDLITHIUM HIGH OUTPUT Batteries. MILWAUKEE BIG HAWG with Carbide Teeth is first-to-market in providing extreme life and durability in both nail-embedded wood and abrasive material applications. Utilizing advanced carbide technology, the new BIG HAWG with Carbide Teeth gives users 50x life in demanding applications with the ability to cut 1000+ more nails. 10X larger carbide teeth rip through materials 5X faster while deeper slots make for fast and easy plug removal. BIG HAWG with Carbide Teeth allows users to cut through the toughest materials including nails, cement board, shingles, plaster and stucco.

Highlights

  • Mechanical clutch in low speed
  • QUIK-LOK chuck
  • POWERSTATE brushless motor provides constant power under heavy load to power through 6-1/4 in. holes
  • REDLINK PLUS intelligence ensures maximum performance and protects from overloads, heating and over-discharge
  • All metal side handle for optimal control
  • LED light to illuminate the work area
  • Compatible with all M18 batteries
  • Includes: M18 FUEL SUPER HAWG, side handle, one 2-1/8 in. BIG HAWG with carbide teeth, one 2-9/16 in. BIG HAWG with carbide teeth, one 3-5/8 in. BIG HAWG with carbide teeth, one 4-5/8 in. BIG HAWG with carbide teeth, 1 BIG HAWG with carbide teeth Arbor, 1 BIG HAWG with carbide teeth diamond file, 2 BIG HAWG with carbide teeth pilot bits
  • Carbide tipped multi-material pilot bit for increased material versatility
  • Shop All Milwaukee Tools
  • Click here for more information on Electronic Recycling Programs
  • Return Policy

Product Information

Internet # 321032559

Model # 2811-20-49-56-9295

Additional Resources

Shop All Milwaukee

Specifications

Dimensions: H 7.3 in, W 3.8 in, D 20.5 in

Dimensions

Product Depth (in.)

20.5 in

Product Height (in.)

7.3 in

Product Width (in.)

3.8 in

Details

Battery Amp Hours

No Battery

Battery Power Type

Lithium Ion

Battery Voltage (V)

18V

Charger Included

Charger Not Included

Chuck Size (In.)

7/16 In.

Chuck Type

Hex

Color Family

Red

Cordless Tool Type

Right Angle Drill

Cordless/Corded

Cordless

Included

Tool Only

Maximum Speed (RPM)

1150 RPM

Motor Type

Brushless

Number of Total Batteries Included

0

Power Tool Features

Keyless Chuck, LED Light, Variable Speed

Product Weight (lb.)

12.1 lb

Returnable

90-Day

Tools Product Type

Power Tool

Torque (lb-in)

0 In lbs

Warranty / Certifications

Manufacturer Warranty

5 Years

Questions & Answers

Is there a case with this tool?
ByFeb 27, 2026
1 Answer | 
Answer This Question

Hi, Bill. The M18 FUEL 18V Lithium-Ion Brushless Cordless GEN 2 SUPER HAWG 7/16 in. Right Angle Drill (Tool-Only) does not include a case.

By|Mar 10, 2026


    In the picture "kit includes" it lists 5 hole saws including a 3 inch but down in "product details" it lists only 4 hole saws not including a 3 inch. Which is it 4 or 5 hole saws and what sizes are actually included?
    ByOct 30, 2025
    2 Answers | 
    Answer This Question

    Hey, Eric. The 9 PC BIG HAWG™ with Carbide Teeth Hole Saw Kit w/ PACKOUT™ Compact Organizer includes One 2-1/8 in. BIG HAWG with carbide teeth, One 2-9/16 in. BIG HAWG with carbide teeth, One 3-5/8 in. BIG HAWG with carbide teeth, One 4-5/8 in. BIG HAWG with carbide teeth, One BIG HAWG with carbide teeth arbor, One BIG HAWG with carbide teeth diamond file, Two BIG HAWG with carbide teeth pilot bits, and Compact PACKOUT™ organizer case.

    By|Jul 29, 2026

      I agree, that’s deceptive to show the 3” included in the pictures (as a 5th hole saw) but to not include it in what you actually receive.

      By|Sep 8, 2026

        (1)

        Will these drill through fiberglass?
        BySep 5, 2025
        1 Answer | 
        Answer This Question

        Hi, Danny. Yes, the Milwaukee BIG HAWG Carbide Hole Saw is designed to drill through a variety of materials, including fiberglass. Its carbide teeth provide durability and cutting efficiency, making it suitable for tough materials like fiberglass.

        By|Sep 8, 2025


          What size is the arbor where it goes into the drill? 7/16?
          ByNov 20, 2024
          1 Answer | 
          Answer This Question

          Hi, Phil! The included BIG HAWG™ Arbor with Carbide Teeth (49-56-9305) is a 7/16" Quick Change Arbor. - Milwaukee Tool, Social Team

          By|Nov 21, 2024


            What size drill bits are in it
            ByJul 13, 2024
            1 Answer | 
            Answer This Question

            Hi Dray! The BIG HAWG Carbide Hole Saw Kit (49-56-9295) comes with the BIG HAWG™ with Carbide Teeth Arbor (49-56-9305), as well as with the BIG HAWG™ with Carbide Teeth Clean Wood Pilot Bit (48-27-1401). The arbor has a 7/16" shank. - Milwaukee Tool Social Team

            By|Jul 25, 2025


              What size arbor does it come with
              ByMay 5, 2024
              1 Answer | 
              Answer This Question

              Hi Drew! The BIG HAWG Carbide Hole Saw Kit (49-56-9295) comes with the BIG HAWG™ with Carbide Teeth Arbor (49-56-9305), as well as with the BIG HAWG™ with Carbide Teeth Clean Wood Pilot Bit (48-27-1401). The arbor has a 7/16" shank. - Milwaukee Tool Social Team

              By|May 10, 2024


                Is this reversible
                ByJan 24, 2024
                1 Answer | 
                Answer This Question

                Yes, it does have a reverse function. - Milwaukee Tool, Social Team

                By|Jan 27, 2024


                  Can you buy a super hawg that has one key on it?
                  ByDec 27, 2023
                  1 Answer | 
                  Answer This Question

                  Randall, we do not offer a M18 FUEL™ SUPER HAWG™ with ONE-KEY. Thank you -Milwaukee Tool, Social Team

                  By|Dec 27, 2023


                    Viewing 1-8 of 21

                    Customer Reviews

                    4.7 out of 5

                    • 4.7 out of 219 reviews
                    • 79% recommend this product
                    Filter by:
                    Showing 1-10 of 219 reviews
                    Received the Milwaukee BigHawg 9 piece carbide teeth hole saw kit. Item # 49-56-9295. These hole saws will go through wood with nails (although I would avoid going through nails if possible because it’s going to take a toll on the bit), cement board, plaster, and shingles. I needed larger sizes and this kit fits the bill with 2 1/8, 2 9/16, 3”, 3 5/8 and 4 5/8. It also comes with Arbor with Pilot bit, 2 Big Hawg with carbide teeth Clean Wood pilot bits and a fantastic pack out carrier to hold everything. I do a lot of rough in work in new construction and additions work and my old stuff needed to be replaced. After reading reviews and a few manufacturers,I decided that the Big Hawg by Milwaukee was the one for me. Tried out one of the saws and it was like cutting through butter compared to my old stuff (see picture). The only con that might be concern for finish work is that they do cut a rough hole. I would highly recommend this kit.
                    by
                    • Recommended
                    1 found this review helpful
                    Man oh man, I love this Milwaukee BIG HAWG 9-piece Carbide Hole Saw Kit with PACKOUT case. This i...
                    Man oh man, I love this Milwaukee BIG HAWG 9-piece Carbide Hole Saw Kit with PACKOUT case. This is the perfect do-it-all hole saw to have on hand when you don't know what type of material you are going to encounter. I have the Milwaukee DOZER hole saws and they do a great job but the BIG HAWG excels at it. The sizes in the set seemed a little odd and non-standard and I honestly don't know what their true intent is. I have put holes in a wide variety of material for running electrical conduit, water lines, drain lines and these hole saws never once faltered. My two biggest complaints when using hole saws are dulling and difficulty removing the plugs. These suffer from neither. Actually, I think I must have set a personal time record for getting a plug out of a hole saw. For me, that alone makes them worth the extra expense. These will cost you more up front but you will recoup that in the life expectancy.
                    by
                    • Recommended
                    1 found this review helpful
                    The Milwaukee big hawg carbide hole saws are amazing. Gone are the days of bimetal blades that bu...
                    The Milwaukee big hawg carbide hole saws are amazing. Gone are the days of bimetal blades that burn up quick. The hole saws are a must if doing anytype of rough in work. The bits grab nicely and feed through the wood with little effort. Being carbide a nail hit isn't the end of the bit, they take a beating and could easily be resharpend and have a tooth replaced if need be. The case it come is is part of the pack out storage system which is great all in its self.
                    by
                    • Recommended
                    1 found this review helpful
                    This is the best hole saw I have ever used. The Milwaukee big hawg kit is an exceptional set of ...
                    This is the best hole saw I have ever used. The Milwaukee big hawg kit is an exceptional set of tools. The carbide hole bits are rugged, cut accurately through wood and composite materials and most importantly, through nails and screws in the wood. The box is jobsite tough with secure latches and mounts on the back to fit the Milwaukee tool boxes. The kit includes two wood and one spiral pilot bits. Milwaukee lives up to its motto, Quality Portable Tools.
                    by
                    • Recommended
                    1 found this review helpful
                    I didn’t know there was such a thing as carbide hole saws. This is a heavy duty set. The saws have three teeth, regardless of the hole size. The carbide insert is much longer than the typical circular saw blade. I assume this is to obtain sufficient brazing length, as the force will be considerably higher when you have interrupted cuts, such as hitting nails in wood. The length of these hole saws are about ½” longer than standard cutters, for deeper cuts. The clean-out slot is open at the bottom, for easier cleanout. The pilot drill point is carbide tipped drill, plus they include a couple very nice 3/8” spade bits. The storage case is deluxe and also heavy duty, but I don’t like the bulk of the system. For me, storage space is always a premium, and I prefer to stack the cutters for storage.
                    by
                    • Recommended
                    4 found this review helpful
                    Okay. The parts in this kit are extremely well made. The hole saws cut through nail laden wood wi...
                    Okay. The parts in this kit are extremely well made. The hole saws cut through nail laden wood with ease. I cut a hole for a soap dispenser in an old vanity top that had more nails than you can imagine. My Milwaukee Hole-Shooter Magnum didn't even faulter with a 2-1/8" hole saw. The question I have, however...who uses the sizes that are included in this kit? None of the sizes match what I would normally find in an electrician's or plumber's kit. What do you do when you don't have the right size? "Wobble" it out! But, I can't believe that is what Milwaukee intended for a product they spent time designing and manufacturing. Maybe they are intended for "rough" work like running electrical distribution or sprinkler lines in a high-rise. I'll give them that and recommend this product accordingly.
                    by
                    • Recommended
                    2 found this review helpful
                    This is a very good set of hole saws, the carbide tips will keep them going a long time.. All the...
                    This is a very good set of hole saws, the carbide tips will keep them going a long time.. All the normal sizes you will need for larger holes are included. Great for going through cement siding like I have. They cut through wire mesh that you find in plaster at times. The larger sizes should be used with a larger drill with a side handle so you can keep a good grip on the drill. Nice having them all in one case.
                    by
                    • Recommended
                    This customer chose to rate the product and not provide text.
                    by
                    • Verified Purchase
                    This customer chose to rate the product and not provide text.
                    by
                    • Verified Purchase
                    Great bits... I bought this version specifically to have the custom pack out for it.
                    by
                    Showing 1-10 of 219 reviews

                    Compare Key Features

                    current item

                    Product Snapshot

                    Built for long-lasting durability and high performance in heavy-duty drilling applications. This cordless right-angle drill delivers corded power with the speed to replace corded right-angle drills.
                    Ideal for professionals who need a powerful and efficient right-angle drill, ensuring maximum performance and durability for heavy-duty tasks.
                    Built for long-lasting durability and high performance in heavy-duty drilling tasks.
                    Built for heavy-duty tasks, this right-angle drill powers through tough jobs. Ideal for professionals who need cordless power and efficiency for demanding applications.

                    Power Output

                    18V

                    Chuck Size

                    7/16 In.
                    1/2 In.
                    1/2 in.
                    1/2 In.

                    Speed Settings

                    Variable Speed

                    Battery Life

                    /

                    Torque

                    0 In lbs
                    0 In lbs
                    0 In lbs
                    0 In lbs