M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Mid-Torque 1/2 in. Impact Wrench w/Pin Detent

Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Mid-Torque 1/2 in. Impact Wrench w/Pin Detent This is a very nice impact driver that has a great feel in my hand. This is definitely a tool for repeating specific torque over and over. Setup for that is a bit time consuming but once you go through the training mode you should be all set. One of my favorite features is that in the event of the tool being lost or stolen you can disable it through the app. You can use it without going through the training mode but if you need repeatedly and proof of that then it’s best to take a few minutes to set it up. The pin detent for those of you that don’t know is basically the same thing has any socket wrench it’s a ball bearing with a spring that keeps you sockets in place instead of a ring that pushes on the inside of a socket. The spring definitely holds sockets on this tool I have to use a nail to push through the side hole in my sockets to get them to release from the tool, which is inconvenient, but you will not loose them if you are working up in the air somewhere. This is a tool only so you’ll need a battery and charger obviously however if you already have Milwaukee tools you’re good to go. I wouldn’t anything smaller than a 5.0 amp hour battery for this tool. But of course it all depends on your needs. I’m very happy to have this impact wrench. I definitely recommend it.

This beauty is a beast. It pains me to think how I ever got along without it. No more fumbling for wrenches. No more staring at 200+ bolts wondering when I would ever finish. This monster doesn't even strain to take off the most stubborn, rusted nut. I don't think it's ever had to wail on a bolt for more than 3 seconds. Besides being strong, I really appreciate the ergonomics. It feels great in the hand. These impacts pay for themselves real quick when I have to take apart a machine. It's a joy to use. My only problem is everyone wants to borrow it.

The Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Mid-Torque 1/2 in. Impact Wrench w/Pin Detent is definitely a feature packed little work horse! Admittedly maybe more than we actually needed. This is a great tool for those whose normal work day includes using it all day long. With the ability to produce completion reports as well as more accurately apply the same torque repeatedly while being in a relatively compact size its really awesome. It is also part of the one key system which allows you to use the app to setup the tool as well as customize, track it and view details on it. It has 4 customizable modes of power control. The built in lights are very bright and light up nicely. If you are using it on a jobsite it is nice to know you have the ability to track it in the event that it wanders off. It being brushless helps with the weight as well as overheating issues. I love having it as an addition to our growing collection of the M18 fuel line of products!

The Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Mid-Torque Impact Wrench. After using pneumatic impacts for years I wanted to finally ditch the air compressor and go cordless. I've used some of the other colored brands and I wasn't very impressed. Well this impact with the M18 battery is perfect for my needs. I just used it to rotate the tires on my son's 4Runner and will be using it on my Tacoma. Plenty of power to get the job done in a lot less time.

This innovative impact wrench has features we've never seen in a mid-torque impact wrench before. We found these features to be truly useful as well, and not just frills. We use our impact wrenches for many purposes and switch back and forth between hammer drills, high-torque and mid-torque wrenches and the like to get the performance characteristics needed for the diverse projects. With this unit's ability to set different operating characteristics using the One Key App, it allows us to use one tool for many different tasks. The unit can store 4 operating modes with different max speeds, max torque, bolt removal speeds and direction controls.. We set up a mode for lug nut removal, one for Hole Sawing, one for concrete anchor screws and a max torque mode. The One Key app makes these easy to configure and change. We put a High Output HD12.0 M18 12 Amp hour battery on this tool and it lasts for hours. We also have a 5 amp hour back up as well to allow the 12 amp hour unit to recharge as needed. This tool is a beast and has performed extremely well on our car projects, home remodeling and construction projects. The One Key app on its own is very useful as well. This tool and the One Key app are designed for professional use cases and the app supports a ton of useful features for businesses that operate at multiple job sites with multiple users. Users can be assigned colors and the app can blink that color to easily identify who is assigned to what tool. Inventory management is a key One-Key feature, keeping track of who has the tool and where they are using it. One Key is available for many Milwaukee tools, not just this one. We lend our tools out a lot and often lose track of them, so even for home users like us, this feature is super helpful. We often waste considerable time trying to find tools and, used properly, the locator feature really helps. The app has a tool lock-out feature which prevents the tool from being used and shows its location if it connects to a phone with the One Key app. We have a smaller 3/8" impact wrench as well, but this unit is so flexible, it has become our go to wrench for every use case. Installation and configuration of the tool and app was super easy. THe preconfigured modes are good, but we wanted to set up specific ones for each of our major use cases. In addition to simple configuration using the app, there is also a feature to allow the tool to be "trained" for more precision. Training the tool is a bit time-consuming and not as intuitive as it could be, but is useful where consistent torque is truly important. The One Key app guided us through the 10 training rounds where the tool deliberately over and undershoots the torque setting we picked and interactively moves closer to the setting. A second torque wrench is needed to check the actual torque to let the tool and app know how close it's getting. Once it learns the torque setting, it's delivers that consistently every time. It will not replace a torque wrench where precision torque is needed, like on a crankshaft bearing caps, cylinder head bolts, etc., but for repetitive construction or basic automotive work where extreme precision is not needed, this is fantastic. We are very pleased with this impact and highly recommend it. Defintiely getting more One Key tools.

This Milwaukee Mid Torque Impact Wrench has plenty of power and is very convenient . The quality of this Milwaukee Wrench is very impressive. I will be using this tool for General Fastening Tasks and DIY Projects. This Milwaukee Wrench can also be used in Industrial, Construction, Automotive Repair, Farm and Agriculture, etc, I am very pleased with this product.

This is my very first Milwaukee tool and I must say the quality of the build is very impressive,and as a cordless impact wrench it has plenty of power, speed and all other features a great cordless tool should have such as a very bright light, battery power indicator, four speed settings with indicator not to mention the software inside that allows reportablity, tracking and program setting. To understand the many features this wrench has you can go to the Milwaukee website.This particular model is mainly for commercial jobs where torque needs to be verifiable and reportable, which can be accomplished through the ONE KEY App which sinks with this tool. By keeping it with all your other tools you could track them all through the tracking devise built into this impact wrench if for instance your tools were stolen. The general idea behind all the sophistication of this tool is to make the overall install process up to 3X faster.

This is a good quality, heavy duty, half inch cordless impact. It has a good weight to power ratio. Some of the other great features are the triple LED lights in the front of the tool, an interchangeable belt clip that can be relocated on either side of the battery, and a pin style socket retainer instead of a tension ring retainer. The MyKey feature is also a great feature. I have used this feature in the past and haven't had any complaints with its function. The Milwaukee cordless line has great battery life and power. I don't expect this tool to be anything but a long-lasting addition to anyones workshop or truck set-up.

Selected this impact wrench for use on our farm and ranch. We have numerous trucks, tractors, and implements that all have specific torque specifications for proper repair and maintenance. This impact breaks loose bolts and lugs on tractor and truck rims without any issue. It also does a great job on bolts, nuts, and fitting on farm implements that have high torque specs. Firstly this is a great impact wrench. What makes it a game changer is the One Key and Torque-Sense features. Download the Milwaukee One-Key app and pair the tool. The genius is the ability to set the desired torque specs and the repeatable application of torque. The tool itself has an LED indicating if the proper torque was applied for each application. Tested the Torque-Sense against a standard torque wrench and the applied torque was always accurate and repeatable with a torque range of 50 - 250 foot lbs. This tool is a timesaver when it comes to projects requiring constant and repeated torquing of nuts, bolts and fittings. The tool has 3 LED lights to illuminate the work area. The tool is very ergonomic and comfortable to use. One-Key also allows you to download data from usage and to create reports as well as tracking to assist in logistics and tool locating. The confidence in knowing that valuable equipment is repaired and maintained at proper specifications is invaluable.

The Milwaukee M18 ½ inch mid-torque impact wrench with Torque-Sense looks like a regular impact wrench but it is unique. It is focused on large scale solar projects to eliminate the need of having to use a torque wrench after using the impact wrench. Using the ONE-KEY app the torque range can be set to 50-250 ft-lbs. The impact wrench sends error codes and performance specifications to the ONE-KEY application. The impact wrench data can be downloaded and used as documentation for the work performed. One visible difference is this impact wrench has four LED lights at the back that lets the user know if they have an application, battery, or tool error. It’s pretty amazing what this impact wrench can do and I’m sure there are other applications that can benefit from this repeatable fastening.