20-Watt Equivalent 2 ft. T12 G13 Type A Plug and Play Linear LED Tube Light Bulb, Selectable White 4 CCT (1-Pack)

I obtained this T12 LED Linear Lamp in order to brighten up our hall closet while getting rid of an old fluorescent bulb. I really loved that this LED bulb fits into the existing fluorescent fixture---just remove the old bulb and snap in the LED---you don’t have to replace the fixture. I also loved that the LED bulb allows you to select from one of four “color temperatures:” you can easily adjust the “color temperature selector switch” from 3000K (bright white which is considered to be a “soft” or “warm” color) to 6500K (daylight deluxe which is considered to be a bright sunny day). I chose the highest setting to really add some brightness to the closet---and I was thrilled with the results. Hopefully the photos I enclosed will do justice to how well lit the LED makes the closet. Other features I liked about the LED include things such as low power usage (the LED only uses 10 watts), the LED is “shatter-resistant” and it contains no mercury.*** The LED bulb comes with a decent set of directions, the first page of which is safety information. On these instructions, “ballast compatibility” is addressed in that the light may not work with all ballasts. The instructions refer you to the company website, so I investigated the site. I hunted for about ten minutes without finding any information---this is the reason I rated the LED at a 4 instead of a 5---even using the site’s search feature yielded no information.**** Per the box, the LED can last up to 35,000 hours, which is another reason I liked this light---if the LED lasts that long, I’ll never have to replace it.

This Fiet 10 watt 2 ft. T12 G3 LED light bulb has the potential to be a good replacement fluorescent bulb with multiple brightness of 3000, 4000 and 5000K. I installed it on my bathroom medicine cabinet, and it worked as well as was advertised. However, it has slight bulky ends to accommodate the switch to a different brightness and became adherence to the cover of my fixture. It also looked like it had burnt at the two ends because of the pleated ends.

I got these 30-Watt equivalent LED replacement bulbs for the fluorescent lights in my shop. These are much brighter, quicker to illuminate, and a much better overall color to see what I am doing than regular fluorescent bulbs. Unlike some LED bulbs that I have bought in the past, these do not produce the annoying shadowing affect that can make seeing what you need a pain. I will definitely buy these in the future if I have a need.

I've never had any issues with feet electric products, and these fluorescent replacement tubes are no exception. They replace a standard F30T12 fluorescent tube And are very easy to install. Due to the way, the LED stripe is inserted into the tube, you need to make sure it's facing the right direction that you want for maximum lighting. The pins are solid and dirt and went in as a replacement very easily and I like the fact that it has multiple color temperatures from 3000° Kelvin to 6500° Kelvin - Basically most of the color temperatures that a homeowner would want from bright white all the way to daylight. These lamps require no wiring changes and the output of 4500 lumens is the equivalent of about a 60 W tube. The tube itself is shatter resistant, which is a good thing, but you should be aware that they are not unbreakable as I had one that was broken due to mishandling in shipping. LEDs are definitely the way to go and I'm glad these are direct replacements utilizing the current ballast in many older fluorescent fixtures. You will have no issues with using these bulbs and you'll be saving energy at the same time!

A terrific replacement for my old fluorescent tube bulb in the strip light in my garage. Wow what a difference it makes. Much more light in the whole area, easy to install, awesome that I can pick the color of light! Not to mention it's long life span and low power consumption. The only bad thing is now I can see the mess that needs to be cleaned-up.

The LED light bulb came well packaged, see attached picture. The bulb was well protected. The packaging was really nice. The LED bulb felt well made, with heavy duty plastic. The bulb fit easily into the fixture. There was no rewiring needed to use the bulb. I used the original ballast. I was able to mix my bulbs. One side is the LED light bulb and other is a regular fluorescent bulb. See the attached picture to compare the two bulbs in the fixture. The LED light bulb is a lot brighter.

I was looking forward to using my new 36” LED Direct Replacement fluorescent bulb. Unfortunately it was delivered broken. It was not properly packaged for shipping. There was no extra protective wrapping around the light. This product might be better if bought in person. As soon as I trapped it from the delivery man, I knew it was broken. It’s hard to review a broken product.

The bulb flickered on and off after installing. Then, after a few minutes, stopped working. I moved it to another fixture and it did the same thing. I returned it to Home Depot and got a replacement.