Hi Jrod, The wood lattice should have no problem supporting your roses, provided that the lattice has proper support itself. You could anchor the lattice to your home or into the ground with wood poles/timbers, especially if the canes are, as you said, very long. One recommendation is Internet #205220341, Model #194354, Store SKU #256276, 4 in. x 4 in. x 8 ft. #2 Ground Contact Pressure-Treated Southern Yellow Pine Timber.
Hi Xena, We are not sure how you intend to orient the trellis - that is, horizontally or vertically. If it is horizontally, some simple wooden stakes can be pounded into the ground every so many feet and then the trellis attached with screws or if you are less-inclined to using drills, etc., you could just zip-tie the trellis to the stakes. To locate stakes, go to the search bar within homedepot.com and enter the words "wooden garden stakes". If the lattice is planned for plants that do extreme climbing, we suggested that you get some wooden garden posts, such as the Outdoor Essentials 4 in. x 4 in. x 8 ft. Western Red Cedar Fence Post (2-Pack), Model# 245388. This is a bit of an investment, but as the posts are made of cedar, you will get years of use from them, and will not have any lattice that flaps wildly in the wind, nor will it struggle to support whatever your garden produces.
Jon, We do not have access to your location, unfortunately, so cannot answer that question; pricing may vary from location-to-location. Strange that the price did not show up onscreen for you. The best suggestion is to contact your preferred Home Depot store for an exact amount. Hope this helps you.
Dear Fuzzy, Suppliers for each Home Depot store vary, so it is best to contact your preferred Home Depot location to inquire about availability.
Lon, Each panel weights approximately 20 lbs. As is dries, it becomes lighter. The freshly-treated material will be heavier.
Teri, This product was manufactured in Canada.
Edster, We tried to find a lattice product for you with a smaller opening size. The 4 ft. x 8 ft. Spruce Pine Fir Pressure Treated Square Wood Lattice, Internet #205091217, Model #159158, Store SKU #1000008110, is closer to your requested grid-opening size, at 1.75 in., but still not as small as you want. For that reason, we do suggest that you contact a Home Depot Pro to discuss a special order.
No, it's not available in the cedar tone.
Yes, as long as it is compliant with your local building codes. The lattice must have the proper support for it to be utilized. Please view the "Installation Guide" link under the "Info & Guides" section of the product page to see how to properly install the lattice.