Internet #205220429

Model # 194362

Store SKU #1000004798

0090489288051

4 in. x 4 in. x 8 ft. #2 Ground Contact SYP Cedar-Tone Pressure-Treated Timber

  • 2X the protection compared to Above Ground treatment
  • Treated for protection against fungal decay, rot and termites
  • Use for decks, walkways, landscaping and other outdoor projects

Frequently Bought Together

Frequently Bought Together

+

Product Overview

Pressure treated deck at sunset to show stairs and an outdoor living space.


Add Value To Your Property

Studies show that adding a deck is one of the best ways you can increase your home's value.

Overhead looking view of a cedar-tone pressure treated deck to feature a chevron deck board print and complimenting bench, stairs, and railings.


Building Code Approved

Pressure-treated decking is building code approved for use in decking in above-ground or ground contact applications.

Close up of the deck boards showing how to properly clean your deck


Extend The Life Of Your Deck

Your maintenance efforts will give you a pressure-treated project that looks bright and fresh for years to come!

A sunny day of a man using a powerwasher to clean his deck boards


Preventative Maintenance Plan

1. Depending on the location of your outdoor project with regard to direct sun exposure, foliage coverage, etc., it may be sufficient to clean/brighten and recoat every two years. 2. If you decide to wait two or more years to perform your next cleaning/brightening, you may want to use a power washer. Be sure that the cleaner/brightener you use contains a mildewcide.

Close up of the a generic paint can on deck boards


Choosing The Right Stain Or Paint

When determining the right stain and paint for your deck, consider what color will best enhance the wood's finish.

A close up of water beaded up on a deck board


Paint or Stain Tips

If you desire to paint or stain the treated wood project, it is important that the wood be dry enough to accept a coating. The best way to determine if the wood is sufficiently dry to paint or stain is to sprinkle droplets of water onto the wood. If the water droplets are absorbed, the wood is ready to be painted or stained. If the water droplets bead on the surface of the wood, it is too wet. You should wait a few days before attempting to paint and stain the wood.

Close up of a non color additive pressure treated deck board


No Color Additive

Weathershield Pressure-Treated Lumber

Close up of a cedar-tone pressure treated deck board


Cedar-Tone

Weathershield Pressure-Treated Cedar Tone Lumber

Close up of a redwood-tone pressure treated deck board


Redwood-Tone

Weathershield Pressure-Treated Redwood Tone Lumber

Close up of a pressure-treated post with Deckorail solar and ball top post caps


Post Caps

Post caps add the finishing touch to your deck, porch, or fence project. What's more, they protect your post from nature's elements.

Close up of a pressure-treated double v and square edge posts


Deck Posts

Deck posts add a classic, decorative charm to your outdoor living space all while adding support to your deck, fence or porch.

Close up of a pressure-treated B2E baluster and square edge spindle


Balusters & Spindles

Treated balusters are used not only for safety and strength, but they also aid in creating a custom look to your railing project.

  • 2X the protection compared to Above Ground treatment
  • Treated for protection against fungal decay, rot and termites
  • Use for decks, walkways, landscaping and other outdoor projects
When your next project really matters, choose the right lumber for the job. Every attractive piece of cedar tone wood meets the highest standards for strength and appearance. This lumber is ideal for a variety of applications, including decks, docks, ramps and other outdoor projects where lumber is exposed to the elements. When used properly, it's both safe and environmentally friendly.Treated wood is typically still wet when it’s delivered to The Home Depot or job site. As it dries, you should expect slight changes in width and length. As lumber dries, it may split, cup and warp. This is more likely to occur to occur in lower-grade boards, where knots and uneven grains are already present. Each piece of lumber is unique and carries physical characteristics that may include the following: knots, warping, shrinkage, swelling and/or splitting.
  • Manufactured from southern yellow pine, a renewable resource, for an eco-friendly choice
  • Pressure treated for ground contact use applications
  • 4 in. x 4 in. x 8 ft.
  • Features uniform thickness, density and cedar tone color with a smooth surface
  • Can be pained or stained
  • No two pieces of lumber are the same.
  • Color, grain pattern and texture will vary as well.
  • Use #2 grade lumber when both appearance is not the most important to you project.
  • May have wane (bark edge) on corners
  • Use #2 grade lumber when strength is the main feature you are looking for on your project.
  • Find everything you need to complete your decking project here



  • California residents see Prop 65 WARNINGS

Product Overview

  • 2X the protection compared to Above Ground treatment
  • Treated for protection against fungal decay, rot and termites
  • Use for decks, walkways, landscaping and other outdoor projects
Model #: 194362
Sku #: 1000004798
Internet #: 205220429

When your next project really matters, choose the right lumber for the job. Every attractive piece of cedar tone wood meets the highest standards for strength and appearance. This lumber is ideal for a variety of applications, including decks, docks, ramps and other outdoor projects where lumber is exposed to the elements. When used properly, it's both safe and environmentally friendly.Treated wood is typically still wet when it’s delivered to The Home Depot or job site. As it dries, you should expect slight changes in width and length. As lumber dries, it may split, cup and warp. This is more likely to occur to occur in lower-grade boards, where knots and uneven grains are already present. Each piece of lumber is unique and carries physical characteristics that may include the following: knots, warping, shrinkage, swelling and/or splitting.

  • Manufactured from southern yellow pine, a renewable resource, for an eco-friendly choice
  • Pressure treated for ground contact use applications
  • 4 in. x 4 in. x 8 ft.
  • Features uniform thickness, density and cedar tone color with a smooth surface
  • Can be pained or stained
  • No two pieces of lumber are the same.
  • Color, grain pattern and texture will vary as well.
  • Use #2 grade lumber when both appearance is not the most important to you project.
  • May have wane (bark edge) on corners
  • Use #2 grade lumber when strength is the main feature you are looking for on your project.
  • Find everything you need to complete your decking project here



  • California residents see Prop 65 WARNINGS

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Actual Product Length (ft.)
8
Actual Product Thickness (in.)
3.5
Actual Product Width (in.)
3.5
Nominal Product Length (ft.)
8
Nominal Product Thickness (in.)
4
Nominal Product Width (in.)
4
Product Length (in.)
96

Details

Chemical retention (lb./cu. ft. )
0.15
Fastener recommendation
hot dipped galvanized
Features
Paintable,Stainable
Lumber Grade
No. 2
Lumber quality
No-prior
Material
Wood
Moisture content
Green
Pressure treatment chemical
MCA - Micronized Copper Azole
Texture
Smooth

Warranty / Certifications

Manufacturer Warranty
See store for details

Specifications

Dimensions

Actual Product Length (ft.)
8
Actual Product Thickness (in.)
3.5
Actual Product Width (in.)
3.5
Nominal Product Length (ft.)
8
Nominal Product Thickness (in.)
4
Nominal Product Width (in.)
4
Product Length (in.)
96

Details

Chemical retention (lb./cu. ft. )
0.15
Fastener recommendation
hot dipped galvanized
Features
Paintable,Stainable
Lumber Grade
No. 2
Lumber quality
No-prior
Material
Wood
Moisture content
Green
Pressure treatment chemical
MCA - Micronized Copper Azole
Texture
Smooth

Warranty / Certifications

Manufacturer Warranty
See store for details

Questions & Answers

Are these Kiln dried?

Are these Kiln dried?
Asked by: fencer
No
Answered by: Dugan
Date published: 2018-08-07

Is this a good option for raised vegetable garden bed?

Asked by: Caps
It would be safer to use either cedar or redwood. There is always a risk with pressure treated lumber of some leaching into the soil. Okay for flowers, not for veggies.
Answered by: Dugan
Date published: 2020-04-20

Are these good for fence posts? Do I need to treat them or seal them if so?

Asked by: Jesse
yes - ground contact rated. They should be fine for fence posts.
Answered by: Dugan
Date published: 2018-08-07

Can this be used with aluminum

Nothing in product data
Asked by: JC
I used coated screws with mine. I still think there is a possibility of chemical reactions between the aluminum and the pressure treatment, causing staining. If you have an option, use a good quality coated screw.
Answered by: Dugan
Date published: 2019-07-26
  • y_2020, m_7, d_13, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_, sid_205220429, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 6ms
  • QUESTIONS, PRODUCT