A: The end is completely covered. Works great in corners. Some have a plastic tab on the end but doesn't interfere with painting.
A: These will fit any standard, wire-type, mini roller frame like SKU 454465 or SKU 458015. Thanks,
A: It could be but if you are doing a large area you may want to use a larger roller.
A: Yes it is very good
A: I'm not sure what pebble stone epoxy is; however, the microfiber cover says for use on semi-smooth to semi-rough surfaces. Good for one-coat coverage with both Latex and oil paints.
A: Used on rough cedar privacy fence, forcing it to go into rough corners & fill low places like knot-holes that were below-surface level: nap seemed thick enough; oil-type stain didn’t degrade roller; prolly OK for your purpose, w/epoxy
A: Yes. It's a good roller to use, because it doesn't shed and it holds lots of paint. Make sure you want a 9/16 nap roller for your epoxy. You may want to go with a foam roller - do some research and good luck with your project.
|Name||4 in. x 3/8 in. High-Density Foam Mini Paint Roller (2-Pack)||6 in. x 3/8 in. Microfiber Mini Paint Roller (2-Pack)||6 in. x 3/4 in. Polyester Knit Mini Paint Roller (2-Pack)||6 in. x 3/8 in. High-Density Foam Mini Paint Roller (5-Pack)|
Buy 4 or more $8.96
Buy 4 or more $10.15
|Product Length (in.)||4 in||6 in||4.25 in||6 in|
|Nap Size/Thickness (in.)||.375||.375||.375||.375|
|Roller Core Size||Mini||Mini||Mini||Mini|
|For Use On||Glass, Metal, Wall||Wall, Wood||Wall, Wood||Glass, Metal, Wall|
|For Use With||All Paint Types||All Paint Types||All Paint Types||All Paint Types|
|Roller Cover Material||Foam||Fabric||Polyester||Foam|
|Roller Length (in.)||4 in||6 in||6 in||6 in|
|THD SO SKU||1000075601|
|View Product||View Product||View Product||View Product|