Thank you for your question. The longest panel we currently sell is 16ft long.
myself, I'd attach 4 or 5 rows of 1x4 across the tubing followed by Woodtite1 in. Fasteners (50-Pieces) to attach the panel to the wood.
Redwood or cedar.
Thank you for your question. This product is only available in Mill Finish.
Thank you for your question. Cost depends on your project and the project specific materials needed. We recommend visiting your local Home Depot and speaking with an associate.
Thank you for your question. The width of the 8ft section is 25 5/8”.
In residential applications, Southeastern Metals’ recommends the use of minimum 15/32 plywood or 7/16 OSB decking. In addition, we specify a 30# felt be installed in accordance with local building code requirements to control condensation. NOTE: Southeastern Metals does not recommend the use of square headed cap nails. If tin tabs are used to secure the 30# felt to the decking material, Southeastern Metals’ recommends a separation sheet of 15# felt or rosin paper be used over the 30# felt, applied in the same direction as the panels. If the building parameters differ from those stated in the manufacturer’s recommended fastening schedule, specific fastening calculators must be computed by the engineer of record. It is not recommended to install these panels without a sheet backing.