#1 Home Improvement Retailer

14 in. Ceramic and Porcelain Tile Cutter

$2337
$25.97
Save $2.60 (10%)
  • Tile cutter with chrome-plated steel rails for smooth scoring
  • Cuts tile 1/4 – 3/8 in. thick, great for DIY tile installation
  • Tile cutter with angled soft grip handle to reduce hand fatigue
  • View More Details
How to Get It

Frequently Bought Together

++
Price:
$2337
$25.97
Save $2.60 (10%)

Product Overview

The ANVIL 14 in. Ceramic and Porcelain Tile Cutter is easy to setup and operate, and is designed with solid chrome-plated steel rails for smooth scoring. This tile cutter can cut ceramic and porcelain tile from 1/4 in. to 3/8 in. thick, and has an angled soft grip handle that reduces hand fatigue on the job. It's perfect for a simple, DIY tile installation.
  • Cuts ceramic and porcelain tile 1/4 in. to 3/8 in. thick
  • Angled soft grip handle to reduce hand fatigue
  • Perfect for DIY tile installation
  • Easy to set up and operate
  • Click Here for Operation Video

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Length (in.)
19.5
Product Width (in.)
5.375 in

Details

Blade Material
Steel
Color Family
Steel
Cuts Through
Ceramic,Porcelain
Flooring Tool Features
Handle grip,Non-slip hand grip
Material
Steel
Maximum tile cut size diagonal (in.)
10
Maximum tile cut size rip (in.)
14
Product Weight (lb.)
5.4 lb
Returnable
90-Day
Tile Tool Type
Manual Tile Cutters
Tools Product Type
Hand Tool

Warranty / Certifications

Manufacturer Warranty
To be free from manufacturing defects.

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 3.5
    out of 269 reviews
  • 62%recommend this product
Filter by:
Showing 1-10 of 269 reviews
It cut glass mosaic tile perfectly!
I did some research and even though there were some horrible reviews on this I decided to give it a try due to it's reasonable price. It scored the tiles and snapped each one perfect. I don't know why there are so many bad reviews on this.
by
    • Recommended
    2 found this review helpful
    Disappointed
    About 3/4 into a kitchen backsplash project, the piece that pushes down onto the tile snapped off the breaker bar. Broke after 4 hours of use. Very poor durability.
    by
      4 found this review helpful
      The worst tool I've ever purchased. STRONG recommendation of DO NOT PURCHASE.
      Furious at how bad this is on so many levels. I've ruined almost half of my stock of tiles for a small project because of this garbage, in addition to having to purchase two more cutting wheels. - The ruler has no indicator of where to line it up, so it must be done manually. - The cutting wheel does not touch the tile in the fully down position. You have to place additional tiles underneath for it to hit. - The pressure "knob" to break the pieces rarely has enough leverage to break the tile, even when pushed fully down. - The pressure knob leaves permanent scuff marks on the tile. You have to cover each time with a cloth to prevent this. - The cutting wheel chipped after cutting 20 tiles, so delayed the project and I had to drive back to HD and buy new wheels. - About 1 out of 2-3 tiles will actually cut, and will usually be a poor cut because of all the manual tweaks you have to use to actually get it to cut. STRONG recommendation of DO NOT PURCHASE.
      by
        4 found this review helpful
        Bought to make rip cuts on 12” porcelain tile
        Tip: be sure the part that touches the tile to snap it is within a few inches of the end of the tile. It will not cut/snap if trying to do so near the middle of the tile (at least for the 12”x12” porcelain tile I was using). I used with the Travisano Trevi 12” porcelain tile for mainly rip cuts. Didn’t try any diagonal cuts. Overall it worked well. Lines were as good as I needed them to be for hidden edges (under trim/transitions etc...). Could be easily cleaned up with tile files to like nicer if needed for more visible areas. I used a 7” tile saw to make the more difficult L and U shape cuts though. Would also work with angle grinder with a blade suitable for tile (diamond?). Was able to cut 1” in the least off of tiles with this manual tile cutter. Any smaller than that was impossible and I was only able to cut partial lengths where it split near the middle and finished up with a wet saw. Would recommend for tile up to 12”x12” based on my personal use.
        by
          • Recommended
          2 found this review helpful
          Works for cutting Dixie Clay Thin Brick Singles
          Worked to cut decorative bricks in a very inexpensive way.
          by
            • Recommended
            1 found this review helpful
            No Experience, easy to use
            This thing works greak on my ceramic tile. Easy to use, inexpensive, and cuts straight. My only suggestion for improvement is that the piece used to push down on the tile sometimes gets caught on the metal piece holding the tile in place, but it’s easy to just move it out of the way.
            by
              • Recommended
              4 found this review helpful
              Help so much
              I have seen people cut tile before but I have never done it myself. I was not very sure I could do it. Well I gave it try and must say it came out very good and the Vnvil 14" tile cutter help out so much for my first time it worked and fireplace came out looking great.
              by
                • Recommended
                5 found this review helpful
                Did the job very well.
                Did the job very well.
                by
                • Verified Purchase
                • Recommended
                6 found this review helpful
                This product is very easy to use. Working with 3x6 subway tile, I was able to make cuts around 1/...
                This product is very easy to use. Working with 3x6 subway tile, I was able to make cuts around 1/4" with a little practice. My only complaint is that the rubber foot occasionally falls when cutting and causes the blade to stutter. Overall, very happy with the results especially for an inexpensive tool.
                by
                • Verified Purchase
                • Recommended
                4 found this review helpful
                Product worked well but was unboxed missing one of the set screws for the fence attachment. Over...
                Product worked well but was unboxed missing one of the set screws for the fence attachment. Overall worked adequately at a competitive price! I have owned it for about two weeks and completed an entire tile shower with it. Works just as good as other brands I have owned in the past.
                by
                • Verified Purchase
                • Recommended
                3 found this review helpful
                Showing 1-10 of 269 reviews