Caster 3 Series Dual Toothbrush Holder in Brushed Nickel

This is a very high quality product both in appearance and in the materials involved.The bracket is brushed nickel and is silver in color. In the photos I attached, it appears gold. That is the lighting in the photo, it really is silver in color. The square shaped glass containers that hold the toothbrushes are thick glass with weighted bottoms and are removable for easy cleaning. Storing your toothbrush in this manner allows the bristles to air dry, keeping them fresher. The base has a rubberized ring inside the nickel frame to cushion the contact with the glass and avoid scratches. The bracket installation was one of the easiest possible...two screws with small wall anchors attach the base to the wall and then the main holder frame simply twists on to the base. Literally a 5 minute task.

Love Love Love this Anzzi Caster toothbrush holder! As soon as I saw it online I thought perfect for my makeup brushes, etc! I went ahead and repurposed it for that reason and am delighted! It did not come with directions but when I took the time to study it - installation was easy. Very heavy duty and very high quality materials. This is a great addition to any bathroom - I love the look!

First off, these fotos don't do this "toothbrush holder" any justice. The mounting itself is HEAVY and SOLID Stainless Steel and the glasses appear like they are crystal. Simply beautiful, elegant and easy to rinse out. Unless this holder is to be mounted on granite or marble, the problem I see is the rather UNIQUE mount. supplied. The brass fitting comes with two screws and two plastic anchors that are no more than 3/8 of an inch apart. Their ad shows it mounted on granite or marble and neither the manufacturer's site or Home Depot's site has ANY instructions other than a drawing. No warnings or words mentioning its recommended use either. It is fairly obvious to me because of its weight and the close proximity of its mounting holes, it really CANNOT be mounted securely on drywall or plaster walls. The brass "button" mount and the holder itself has a set-screw to attach them together and can be pivoted to insure it is level. A very clever design! But even the single cup holder would not stay mounted in anything other than granite or marble. If longer screws were used and a stud located behind sheet rock or plaster, I still fear it would split the wood or even twist in use for the same reasons. The mount is made in two pieces and the manufacturer could easily design a "wing-style" mount that spans a few inches to stabilize itself.

This review is for the ANZZI Caster 3 Series Dual Toothbrush Holder in Brushed Nickel. I’ve always been satisfied with Anzzi products and this has the look and feel of a quality product. I will say it’s quite heavy, even with nothing in it, so I had some concerns about the best way to mount it. Included are screws and anchors, which are long enough to support the weight. I did decide not to permanently mount it at this time and am using it on the counter top with some “feet” that I had on hand and it worked well. It’s not difficult to mount; you do have to remove the gold mounting plate from the back but this actually makes it easier to place and attach. Although leveling can be a little tricky with such a small surface area (the mounting plate is not very big). Fortunately, you have a little room to adjust once you attach the holder. The glass jars are also heavy and have no drainage, which may or may not be a problem depending on where you plan to use it.

Although this is meant to be a toothbrush holder, it was perfect for my alternate use. The holder is really beautiful and I liked that it mounted to the wall rather than sat on the counter. The installation is a bit tricky with the set screw on the bottom. Setting the screw in a position that's upside down and backwards took quite some time to get it right. The glass holders are thick so I don't see them breaking anytime. They also fit in the metal holder loosely so taking them out and putting them in is easy which I needed since I use one of them as a water glass to take my pills. The construction of the metal part is very solid and the finish had no blemishes. It's a quality product.

I would definitely recommend this item, just pricing. But it's a plus.