Our fully adjustable, Adjust-A-Gate system is ideal for repairing an old gate or building a new gate. Equipped with all necessary hardware parts, our gate is assembled onsite to get the job done right the first time. The Adjust-A-Gate system comes with all the components needed to build a sturdy, reliable gate that will serve you for years to come. The Adjust-A-Gate systems will adjust to fit openings of up to 8ft. wide (single gate) or up to 16 ft. wide (double gate), accessories include a drop rod (SKU UL301) for double drive applications. Use our 3 Rail Adjust-A-Gate Kit Contractor series, for openings of 60 in.-96 in. wide, 60 in. high frame for 6 ft. high and taller fences.
ANTI-SAG GATE KIT: This gate hardware kit has a patented truss cable system that keeps your gate from sagging or dragging. Use it to fix an existing gate or build a new gate up to 96" wide
EASY TO INSTALL: The Adjust-A-Gate building kit is installed on-site to perfectly fit your gate opening every time. Just add wood or composite to match your fence
RUST RESISTANT: Even in wet weather from a two-stage, powder-coated steel frame
REPAIR EXISTING GATES: Have an old sagging gate? The Adjust-A-Gate steel gate frame kit is the perfect solution for straightening and strengthening your old gate
ADJUSTABLE: Telescoping bars to fit gate openings from 60" wide up to 96" wide (Great for 6' and taller fences). No cutting required
KIT INCLUDES: Vertical frame, spreader bars, frame hinges, post hinges, 2-way gate latch kit, truss cable and screws
A:Â Yes. I used two kits to make an RV gate where both sides swing outwards.
by|Apr 6, 2023
A:Â Yes, left or right outwards.Â
by|Apr 23, 2023
A:Â To make it swing outward the hinges would have to be mounted on the opposite side of the post.
by|Apr 6, 2023
Q:Can you provide installation?
by|Aug 21, 2022
1 Answer
Answer This Question
A:Â Sorry, we do not provide installation.
by|Feb 9, 2023
Q:can i use this on a 6 x 6 post? Would the fence panels be even?
by|Aug 17, 2022
1 Answer
Answer This Question
A:Â They are not designed to be used on a 6x6 post as the fence will not align.
by|Feb 9, 2023
Q:Can I get a gate that is 12 feet wide and 8 feet high
by|Aug 11, 2022
1 Answer
Answer This Question
A:Â AG60-3 60" - 96" - Max frame width 94" (-1' latch side, -1' hinge side) 60" Height is our largest gate.
by|Feb 9, 2023
Showing 1-4 of 93
Customer Reviews
4.5 out of 5
(390)
4.5
out of 390 reviews
90% recommend this product
5266
480
319
210
115
Filter by:
Showing 1-10 of 390 reviews
Apr 20, 2022
Garbage
Do NOT buy this garbage. The design of these gates, are ment to sit inside of the 4x4 fence post. So, your fence pickets will NOT line up, with the fence it self. No where does it tell you that. The display showed the gate, lined upwith the fence it self. Then when I called to complain, they said, it wasn't designed to be flush with the fence. What idiot, wanted there gates to be on the inside of the fence post, and not lined up with the rest of the fence????
by
1 found this review helpful
Feb 28, 2021
Gate sags and the hinge could not support the weight at 60" wide.
Gate still sags despite tensioning the cable to the max. The hinge could not support the weight on a 60" wide opening.
by
4 found this review helpful
Oct 26, 2020
We purchased the larger gate kit to replace/strengthen a 5-ft gate that was in disrepair. While ...
We purchased the larger gate kit to replace/strengthen a 5-ft gate that was in disrepair. While the frame itself is probably 8.5/10 rating, the hardware is very substandard. We practically threw away 80% of their hardware including the gate latch and opted for something that was more robust. The latch was cheaply made, the screws were not long or wide enough (flimsy), and we couldn't use the mechanism for the 4x4 post. We had to purchase heavy duty "J-hooks" to connect to a 4" galvanized post instead. We strongly recommend the company offer a gate kit that mounts to a galvanized round pipe using J-hooks versus a 4x4 wooden post. Lastly, this company should take a serious look at the gate hardware. The associated engineered hardware just doesn't meet the QC standards. Conclusion: If you purchase this product, be prepared to only use the frame itself and purchased heavier duty hardware if you want your gate to last.
by
DIY
Verified Purchase
5 found this review helpful
Oct 24, 2020
I took my time and attached the gate frame to...
I took my time and attached the gate frame to a 96 inch (8 feet) fence panel. That is the max length for this gate kit. We’ll see if it sags over time and if the supporting cable can be used to keep it stable. Even so, I plan to add something to support It, like a small wheel on the bottom corner opposite the hinges. After two weeks, it seems that everything is gonna be alright :)
by
Verified Purchase
4 found this review helpful
Jul 7, 2020
Adjust a gate works
Adjust a gate worked really well I bought 3 for my project. I built them all in my grauge then hung them. It worked really well I added more support to my 4x4 to keep them stright cause the doubal gate are 80 inches each door so they get heavy fast but I would recommend it and use it again.
by
Recommended
3 found this review helpful
Jul 2, 2020
Great gate frame. Made the job easy. Especially leveling of...
Great gate frame. Made the job easy. Especially leveling of the gates. I would highly recommend adding a gate wheel, particularly if you are planning on extending the frame to max length.
by
Verified Purchase
3 found this review helpful
Jun 11, 2020
It works beautifully and have gotten several compliments on my gate! Just listen to the previous ...
It works beautifully and have gotten several compliments on my gate! Just listen to the previous reviews and buy deck screws instead if the screws provided.
by
Verified Purchase
Recommended
5 found this review helpful
Nov 24, 2019
Great easy gate kit
Easy to put together and adjustable. Very solid as i paired the kit with round steel metal posts and sunk them in tbe ground 2 feet. Very well made and sturdy gate kit.
by
Recommended
5 found this review helpful
Oct 22, 2019
Great looking and easy to install
The gate kits were very easy to install. The directions were clear enough to figure out with little issue. I’m glad my kits came in black because a lot of other reviewed photos look gray or tan. The supplied screws are garbage so plan to supply your own weatherproof wood screws. But overall great value for a quick, good looking DIY gate
by
Recommended
5 found this review helpful
Oct 1, 2019
The gate arrived very well packaged. Instructions were easy to follow and all parts were in the k...
The gate arrived very well packaged. Instructions were easy to follow and all parts were in the kit. I disassembled a 6’ X 8’ fence panel and put it back together using the gate kit. Added a support wheel as an 8ft gate is a bit stretched for just cable support. The cable will support it just I wanted a little assurance. The only sting I would change is the cable is rubber coated and that will slip through the thimble clamps punching it. Take the rubber coating off. As long as you grease the cable once a year for corrosion protection it’ll hold up fine.
Black Galvenized Steel 8-Board Gate Frame for 47 in. W Opening with Removable Arch
Looking for an easy and elegant way to takeLooking for an easy and elegant way to take your outdoor space to the next level? The versatile design of our gate frame is the perfect way to elevate any backyard entrance. This decorative and strong PRO8 gate frame makes creating your backyard entrance as simple as possible. Installation is quick and easy while its durable galvanized steel construction and powder coated finish ensure it'll last for years without sagging. Use with the arch for a classic look, or without the arch for a modern frame. On top of beauty and durability, we made our gate frame easily customizable. The ability to use whichever slat material complements your unique space and grants you the versatility to create the best gate possible.Our frames install in a matter of minutes, making them perfect for busy contractors and DIYers. Get creative and transform your environment today. Create a gate that not only gives you the look you want but will stay free of sagging, dragging, and getting out of square.View Full Product Description
47 in. H/ 36 in.-60 in. W Original Series 2 rail adjustable Double Drive Kit
Our fully adjustable, Adjust-A-Gate systemOur fully adjustable, Adjust-A-Gate system is ideal for repairing an old gate or building a new gate. Equipped with all necessary hardware parts, our gate is assembled onsite to get the job done right the first time. The Adjust-A-Gate system comes with all the components needed to build a sturdy, reliable gate that will serve you for years to come. The Adjust-A-Gate systems will adjust to fit openings of up to 5 ft. Wide (single gate) or up to 10 ft. wide (double gate), accessories include a drop rod for double drive applications.View Full Product Description
3 Rail 60 in.H/ 36 in.-60 in. W Kit-Contractor Series
Our fully adjustable, Adjust-A-Gate systemOur fully adjustable, Adjust-A-Gate system is ideal for repairing an old gate or building a new gate. Equipped with all necessary hardware parts, our gate is assembled onsite to get the job done right the first time. The Adjust-A-Gate system comes with all the components needed to build a sturdy, reliable gate that will serve you for years to come. The Adjust-A-Gate systems will adjust to fit openings of up to 8ft. wide (single gate) or up to 16 ft. wide (double gate), accessories include a drop rod (SKU UL301) for double drive applications. About Adjust-A-Gate: One of the biggest headaches of building a fence is getting the gate right. Adjust-A-Gate is your no-nonsense solution to all your gate frame woes. Stay on-time and on-budget with our reliable and versatile gate frame system. The premier gate frame kit on the market, Adjust-A-Gate is a straight-forward, lifelong solution, easy enough for homeowners but with superior quality that meets the demands of the professional contractor. Building your gate on-site eliminates measurement issues, so you get the right gate the first time, every time. We support wood, vinyl, and composite materials as well as ranch style fences, so you'll have an easy time finding the right design for you. Whether you are a professional contractor or do-it-yourself enthusiast, Adjust-A-Gate is the right solution for you.View Full Product Description
Black Galvenized Steel 6-Board Gate Frame for 36.25 in. W Opening with Removable Arch
Looking for an easy and elegant way to takeLooking for an easy and elegant way to take your outdoor space to the next level? The versatile design of our gate frame is the perfect way to elevate any backyard entrance. This decorative and strong PRO6 gate frame makes creating your backyard entrance as simple as possible. Installation is quick and easy while its durable galvanized steel construction and powder coated finish ensure it'll last for years without sagging. Use with the arch for a classic look, or without the arch for a modern frame. Its tough, galvanized steel construction makes it as long lasting as it is good looking. On top of beauty and durability, we made our gate frame easily customizable. The ability to use whichever slat material complements your unique space grants you the versatility to create the best gate possible. Our frames install in a matter of minutes, making them perfect for busy contractors and DIYers. Get creative and transform your environment today. Create a gate that not only gives you the look you want but will stay free of sagging, dragging, and getting out of square.View Full Product Description