#1 Home Improvement Retailer

VenturiVent 1.1 in. x 14.2 in. x 48 in. Ridge Vent in Black with Nails (Sold in Carton of 10-Pieces Only)

$10728
/carton
Apply Now
Pay $82.28 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Helps reduce excessive moisture in the attic
  • By reducing heat, AC does not work as hard
  • Ring shank nails taped to each 4 ft. piece
Store
0 in stock
Text to Me
caret

Product Details

The low-profile, shingle-over look of VenturiVent Plus creates a clean, uncluttered roofline. It installs on the peak of the roof allowing exhaust ventilation along the entire ridge end-to-end. With a 12 in. W, matching shingles can be installed over the vent, allowing the vent to appear almost invisible from the ground.
  • External wind baffle enhances airflow performance and provides weather protection
  • Provides 18 sq. in. of net free area per linear foot
  • External baffle deflects wind and weather over the vent to help protect the attic from rain and snow infiltration
  • VenturiVent Plus has pre-printed slot guides for truss or ridger pole construction
  • Pre-drilled nailing holes are designed to assure proper nailing
  • Miami-Dade County approved
  • Suitable for 3/12 to 16/12 roof pitch
  • Helps to fight heat and moisture buildup inside an attic as well as ice dams in cold climates
  • Requires intake ventilation for proper performance
  • Use the Home Depot online calculator to determine how many are needed for each attic
  • link to ventilation calculator to compute amount of ventilation recommended
  • Return Policy
caret

Specifications

caret

Questions & Answers

5Questions
caret
Q:How much linear feet does each box have
by|Oct 17, 2022
1 Answer
Answer This Question

A:  There are 40' per box. Thank you!

by|Oct 21, 2022
    caret
    Q:Do you know of a ridge cap that is made of aluminum, I?m repairing a roof that has that with no shingles
    by|Sep 30, 2022
    1 Answer
    Answer This Question

    A:  I am not sure how an aluminum ridge cap would cover the vent. As long as the cap covers the 11" of the vent that needs to be covered then I would say you should be okay. Thank you!

    by|Oct 10, 2022
      caret
      Q:Can these be used with steel roofing ?
      by|Sep 6, 2022
      1 Answer
      Answer This Question

      A:  No these are made for shingles roofs. Shingles are nailed to these panels.

      by|Sep 9, 2022
        caret
        Q:I need to vent a shed roof that terminates against a vertical wall. I will have soffit intake vents at bottom of roof. What product can I use for exhaust vent at top of roof where it meets wall.
        by|Aug 9, 2022
        1 Answer
        Answer This Question

        A:  At this time we do not make a vent where the roof meets a wall. Thank you!

        by|Aug 19, 2022
          Showing 1-4 of 5
          caret

          Customer Reviews

          4.2 out of 5
          (10)
          • 4.2
            out of 10 reviews
          • 75%recommend this product
          Filter by:
          Showing 1-10 of 10 reviews
          High quality co-polymer ridge vent with imprinted slot guides & nail line guides on the top surfa...
          High quality co-polymer ridge vent with imprinted slot guides & nail line guides on the top surface. The underside has reinforced ribs for support and built-in ventilating end plugs. Installation nails are included in the package. Cap shingles can be easily installed over the top of the ridge vent to make it hidden from view. There are installation instructions included but I highly recommend going to the Air Vent website and watch the videos on installation. A box of these will cover 40 linear feet of roof ridge. These are Made in the USA.
          by
          • Recommended
          2 found this review helpful
          Very durable, flexible yet still solid. Easy install. Appears to...
          Very durable, flexible yet still solid. Easy install. Appears to be just as easy to remove and replace if ever needed. The low profile of this system makes it look great on any roof. I did have to buy a roll of screen because this box didn’t have any filter.If they could double the amount of nails given that would be helpful too.The nails provided are long ring shank nails that work great.
          by
          • Verified Purchase
          Much better system than other ridge venting systems that I've...
          Much better system than other ridge venting systems that I've seen in the market. Easy to install and comes with everything you need.
          by
          • Verified Purchase
          I have not installed these yet, they are for a...
          I have not installed these yet, they are for a spring project. They were packaged well and arrived as promised in good condition.
          by
            Delivered on time. Was new and in good condition. Works...
            Delivered on time. Was new and in good condition. Works great.
            by
              critter, small insects, and small debris access
              I never had issues before in my attic with small pieces of plant debris, mice in the attic, wasps, roaches, and other insects until I installed these. After looking at options to correct these issues I would never install these had I known what I know today.
              by
                1 found this review helpful
                1. UPS driver handed me loose nails. bag for nails...
                1. UPS driver handed me loose nails. bag for nails were open, box was open. Not very good packaging.2. In California fire department suggests opening to be covered with 1/16 mesh to prevent embers to come inside for wild fire. I was expecting some measure for that but I had to order the mesh myself.
                by
                • Verified Purchase
                5 Star Review
                Rating provided by a verified purchaser
                by
                • Verified Purchase
                We were replacing the roof of our house and decided to give these roof vents a try at only a portion of the standard venting costs thought why not. I liked the fact that you cover these with matching shingles looked nice. With ten four-foot pieces was exactly what we needed for our house and pool house. All pieces arrived in perfect condition with all the markings you need for layout and nails for installation. Along with well-illustrated directions
                by
                • Recommended
                2 found this review helpful
                The Venturivent is a good way to vent your roof from the heat that it traps inside. You want to m...
                The Venturivent is a good way to vent your roof from the heat that it traps inside. You want to make a balance of 50% intake and 50% exhaust, otherwise you have air that will not travel in and out like it should. Unlike the Shinglevent II, this does not have the filter inserted into it to help keep the air from sucking in rain and snow. The filter is not very thick and isn't a make or break part to have, just an update from this first design. Nothing wrong with it, works great and keeps the weather out but vents the roof as it should. These are not hard to install but you need to have some experience with how a roof is designed and put together. Basically you end up making a 3/4" slot on either side of the roof top support and that then allows all trapped heat to escape. The nails to install it are provided. After installing the vent, you simply attach your singles to it and it becomes a seamless part of your roof. NO more ugly spinning vents or hidden ones on the back of the house, you can do all of that with this product. Well made and rigid plastic should give lots of years of great attic ventilation. 5 year warranty provides reimbursement for all labor costs incurred in removing any defective vent and installing the vent replacement in addition to the replacement product itself. Can't really beat that.
                by
                • Recommended
                2 found this review helpful
                Showing 1-10 of 10 reviews

                Frequently Bought Together

                ++
                Price:
                $10728

                Compare Similar Ridge Vents

                VentSure 11 in. x 240 in. RidgeCat Rolled Ridge Vent in Black with Nails
                current product
                VenturiVent 1.1 in. x 14.2 in. x 48 in. Ridge Vent in Black with Nails (Sold in Carton of 10-Pieces Only)
                Cobra Rigid Vent 3 - 11.5 in. x 48 in. Roof Ridge Exhaust Vent in Black, CaseShingleVent II 1.4 in. x 14 in. Static Vent in Black (Sold in Carton of 10/4 ft. Pieces Only)
                BrandOwens CorningAir VentGAFAir Vent
                NameVentSure 11 in. x 240 in. RidgeCat Rolled Ridge Vent in Black with NailsVenturiVent 1.1 in. x 14.2 in. x 48 in. Ridge Vent in Black with Nails (Sold in Carton of 10-Pieces Only)Cobra Rigid Vent 3 - 11.5 in. x 48 in. Roof Ridge Exhaust Vent in Black, CaseShingleVent II 1.4 in. x 14 in. Static Vent in Black (Sold in Carton of 10/4 ft. Pieces Only)
                Price
                $5171
                /roll
                $10728
                /carton
                $12922
                /case
                $18115
                /carton
                Ratings
                (18)
                (10)
                (57)
                (6)
                ShapeRectangularRectangularRectangularRectangular
                Mounting PositionRoof MountRoof RidgeRoof MountRoof Ridge
                Cap Shingle Compatible11.5" Wide12" Wide12" Wide12" Wide
                FeaturesUV ResistantWeather ResistantCorrosion Resistant,Corrosion Resistant,Corrosion Resistant,Corrosion Resistant,Corrosion Resistant,UV Resistant,UV Resistant,UV Resistant,UV Resistant,UV ResistantFiltered
                Intake/ExhaustExhaustExhaustIntake/ExhaustExhaust
                Net-Free Area (Sq. In.)300181818
                Power TypeNon-PoweredNon-PoweredNon-PoweredNon-Powered
                View ProductView ProductView ProductView Product