#1 Home Improvement Retailer

Internet #203311136

Model #242

6 ft. White Aluminum Spinner Flagpole

  • Spinning design prevents flag from tangling
  • Designed for fast and easy mounting
  • Non-rusting mounting hardware designed for outdoor use
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Never display a tangled flag again. The spinner pole set by Annin Flagmakers is a 2-Piece 6 ft. White Aluminum Flagpole with a gold pole ornament. Each set contains all of the accessories needed to fly either a 3 ft. x 5 ft. grommeted flag or a 2-1/2 ft. x 4 ft. sleeved banner. The pole, bracket and accessories are all made of non-rusting materials and will last for years when properly maintained.
  • For flying a traditional flag with grommets
  • Top 40 in. of the pole rotates on ball bearings so the flag always hangs free
  • Includes 2 flag fastener
  • Includes non-rusting aluminum bracket

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Flagpoles

current product
6 ft. White Aluminum Spinner Flagpole
6 ft. Tangle-Free Flagpole, Aluminum Spinning Wall Mount 1 in. Flag Pole Heavy-Duty and Rust Free Silver7.5 ft. Aluminum Indoor Telescoping Flagpole with Tangle Free Carabiners and Golden Eagle Top Finial
BrandAnnin FlagmakersANLEYANLEY
Name6 ft. White Aluminum Spinner Flagpole6 ft. Tangle-Free Flagpole, Aluminum Spinning Wall Mount 1 in. Flag Pole Heavy-Duty and Rust Free Silver7.5 ft. Aluminum Indoor Telescoping Flagpole with Tangle Free Carabiners and Golden Eagle Top Finial
Price
Ratings
(161)
(7)
(3)
Outdoor Living Product TypeFlagpoleFlagpoleFlagpole
View ProductView ProductView Product

Specifications

Dimensions

Assembled Depth (in.)
1 in
Assembled Height (in.)
72 in
Assembled Width (in.)
1 in

Details

Outdoor Living Product Type
Flagpole
Product Weight (lb.)
3.40
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
90 Days Against Defects in Manufacturing

Questions & Answers

30Questions55Answers

What is needed to put a six foot flag pole in the ground in the front yard

Asked by Alan June 13, 2020
3
Answers

as i understand this is not a simple nor inexpensive installation - if you are in a condo you must get permission - and, because of the wind factor the flag must be secured - you must dig a LARGE hole, must reinforce the sleeve into which the pole goes - with concrete - good luck - you can find lots of info on-line.

is this a one piece pole

Asked by master1john May 16, 2020
6
Answers

No, it's a 2pcs pole.

What is the width diameter of the pole?

Asked by Chivas January 23, 2020
6
Answers

One inch in diameter.

The top ring broke in the wind. Where can I buy this part

Asked by Gene January 25, 2019
5
Answers

you have to buy the whole pole

I need an 8ft, pole, is kit sold with long pole?

Asked by John September 13, 2018
5
Answers

It’s a 6’ pole. Best flag pole ever

How much weight can this pole hold?

Asked by Sha July 25, 2018
5
Answers

It can hold a good flag but probably not to much because of spin joint

How does the ball at top of pole attach to pole? If it screws on/off, is it a male or a female co...

Asked by Gk July 8, 2018
7
Answers

omg!!

Can the length of the pole be shortened cut cutting it down?

Asked by Niagara June 1, 2018
5
Answers

yes the lower pole can be cut down. you may not be able to get the plastic end cap out and put back though

What size flag is this made for?

Asked by erose3 May 20, 2018
7
Answers

3 FT. X 5 FT.

What size is the thumb screw?

Asked by MacNews February 16, 2018
6
Answers

The thumb screw measures 7/8" long.

6 ft. White Aluminum Spinner Flagpole - page 2

Customer Reviews

  • 4.1
    out of 161 reviews
  • 85% recommend this product
Filter by:
Showing 1-10 of 161 reviews
I like this flagpole. I live in a fairly breezy town, and the spinning action means the flag does...
I like this flagpole. I live in a fairly breezy town, and the spinning action means the flag does not get tangled in the wind anymore. It was easy to assemble. However the 2 parts of the pole don't lock together. Every other day or so the lower half falls off. Pros: Easy to assemble, prevents flag from getting twisted, easy to break down. Cons: Too easy to take apart. The bottom half of the pole drops off.
by LeahfromHoquiamWA
Simple and very easy to put together. I've had the pole and flag fro the last month and I'm extre...
Simple and very easy to put together. I've had the pole and flag fro the last month and I'm extremely happy with my purchase.
by GT
1 person found this helpful
This is the best flag pole I ever had. The flag does not get tangled. My light works great with...
This is the best flag pole I ever had. The flag does not get tangled. My light works great with it.
by AFVet
under the Annis name?
made in China. really? I expected better quality. could have swore I saw it was made in America on the description.
by Billy
1 person found this helpful
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Works great. No problems with the 2pc pole coming...
Works great. No problems with the 2pc pole coming apart.
by ANNETTE
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
The components themselves are of excellent fit and finish, and...
The components themselves are of excellent fit and finish, and function as described. However, the item came without any instructions whatsoever. (I earn my living as a handyman so I "figured it out", but the average homeowner probably will need some assistance.) Also, the unit is supplied with 1/8" diameter x 1" long screws and matching plastic anchors. The base itself is 1/2" thick. The mortar on my brick home is recessed about 1/8". This left only 3/8" of screw/anchor to support the weight of the flag and pole, in an area known to be windy (suburban Chicago). I wound up drilling out the holes in the base in order to use 3/16" x 2" Tapcons (self-tapping concrete screws) to install it.
by DOMINICK
Showing 1-10 of 161 reviews