2 in. Soft White Recessed LED Swivel Puck Light, Brushed Steel

This little light is awesome.its made with great quality material and precision machined steel. It has a great finish and its very bright for such a small light. The wire has a good thick rubber coating on it and the springs are extremely strong this light won't move around at all once its installed. I recommend using male female wire connectors and solder the wire to them and use heat shrink.

Armacost Lighting 2 in. Soft White Recessed LED Swivel Puck Light, Brushed Steel. I am just blown away with this light fixture. Even with it's tiny size of has all of the benefits of a large recessed fixture. It is 12 volt low voltage, so you'll need a separate power supply. The construction of it is very good. As a professional electrician, I am always looking for new products to provide for my customers. Has nice finish and very bright soft white.

In our house we have some built-in shelves in our living room with under cabinet puck lights. We were looking for upgrade options. I ordered this to see how it would work, unfortunately the existing hole is too large for this light. Since this light takes 12vdc I thought I would use it for some experiments with some battery backup lighting projects I have been casually thinking of doing for a while. The light seems to be high quality and is very easy to install with spring clips. A 1-3/8 hole saw (which is a standard trade size for 1” emt box connectors) works nicely to drill the hole. The 3000k light color produces a nice soft white The light is bright and provides a lot of light for 3 watts. Playing around I made a battery backup box for instant light if the power goes out. I used an old box, drilled a hole in the top to mount the light. I placed a small 12v 1.3ah lead acid battery for the power, I used a relay that is energized by a wall socket. While the relay is energized is holds the circuit open from the battery to the light, when power goes out the relay closes the circuit to the light which turns it on. I put a float charger on battery to keep it charged while in standby.

Very easy to install just installed the light in my work truck I drilled a13/4inch hole next to mydome light spliced wires in to my dome light bent spring loaded clips back popped it in and the best part is it is dimmable with your dome light knobe or puts out sufficient light and can be pivoted to any location of the cab of my truck it has simple to read instructions goes in in about 5 minutes thanks jim.

Armacost 2 inch recessed light is pretty neat. It’s very easy to install. And it’s adjustable so if the light isn’t actually where you want it shining you can change the angle of the light and then twist the whole light assembly to get it right. The light is small and very useful if you need light in an area where mounting space is small this works for that.

This is a GREAT Little Lite Fixture. It operates on 12 Volts DC so it can be used in any AUTOMOBILE! It has two spring loaded clips that make it easy to install. Just cut a hole large enough for it to slip inside and let the spring clips spring back to hold it fast. Simple Red and Black wire leads are super easy to connect. You will notice how the central "Eye" swivels so it can be pointed where ever you like.

The Armacost Lighting 2 in. Soft White Recessed LED Swivel Puck Light, Brushed Steel is a bright light rated at 3000K provides adequate brightness. I used a current existing DC power convertor to power the light. The swivel works great for directing the light to a specific location, as in my case a photo. The tensions clips on the light frame are very strong and are excessive for such a small light. I hope I can get the light down in the future (if needed to be removed) with out damaging the sheetrock with the powerful clips in place.

This is my first time using a 12 Volt DC converter for lighting products. The swivel 2 inch 3000K soft white light does a good job in directional light as I did with some artwork. The installation was very easy after purchasing the Armacost 48 watt 12 volt DC LED power supply. I as using the 48 watt since I am going to add additional 12 volt lights and power them off of this power supply. The hole you cut out is 1 3/4 inch, which you will have to measure since not template is provided in the package. The spring clips are very strong and could hold a light with a 6 to 8 inch cut out. What I like best is that the 3000K soft white light lights up the area, as well as the the object you aim the light at for added lighting as I did with some art work..

Just what I was looking for to replace some 15 year old leds