A: Don't waste your time with this kit. Just get an angle grinder with a flap disc. About the only semi-useful part of this kit is the balancer.
A: Yes, this blade sharpener and balancer will work with any non or mostly non-curved mower blade.
A: This tool is a piece of junk. Get a grinder and a flap disc 80 grit and that works better
A: This is a simple device for sharpening a lawn mower blade that is typically about 20 inches long by two inches wide by 1/8 inch thick, with a cutting edge about 4 inches long on each side. If your blade looks anything like that, it is good. Just a suggestion: When removing the blade, make SURE you know how to put it back on the same way. It is easy to put it on backwards, which doesn't cut the grass at all. Keep in mind, however, that this is not a serious tool for serious mowers. It is intended for the backyard mechanic who just wants to keep his mower in decent shape and keep it going as long as he can.
A: Doesn’t matter, as long as it has a removable blade.
A: Probably not. It is like a knife sharpener. You pull the blade out and then sharpen like you would do to a knife.
A: yes, I have been using for years, on a push lawn mower blade.
A: Yes it does sharpen them. I’ve been using this great tool for sharpening my lawn mover’s blade for the last few years and it works great. You just need a good drill machine for it to be effective. Use it little at a time on both sides and then check the balance using the included balancer.
A: I used it to sharpen blade on Toro push mower
A: Yes, used it on both my push and riding lawnmower blades. If your blades are really dull, you're better off having them grinded professionally or just get new blades. This sharpener works pretty good.
A: Yes, the balancer has stepped ledges(?) that increase in diameter towards the bottom. If your blade didn't exactly lay on one of these steps you would have to be careful to center it.
A: Yes, mine has star too and have been using this for few years now. You can balance star edges on the balancer.
A: yes it will work because of the cone shape.
A: Yes, mine has star too and this works.
A: Yes. It works.
A: No clue
A: It looks to be made in china. It doesn't clearly state it in English but from the little Spanish I know it looks like that's where it's made.
A: The name “China” is stamped on one of the parts.
A: This product is manufactured in China.