![]() | ![]() | ![]() | ![]() | |
Brand | Arrow | DEWALT | DEWALT | DEWALT |
Name | 5/8 in. Brad Nails (1000-Pack) | 1 in. x 18-Gauge Brad Nails (2500 per Pack) | 1-1/4 in. x 18-Gauge Brad Nails (2500 per Pack) | 3/8 in. Heavy Duty Staples (5000-Pack) |
Price | $397 | $697 | $898 | $1094 |
Ratings | (45) | (245) | (289) | (48) |
Staple Width (in.) | 0 | 0 | 0 | .42 |
Staple type | BN1810 | BN1810 | BN1810 | 3/16" Crown |
Assembled Depth (in.) | .5 in | 5.5 in | 5.5 in | 4.6 in |
View Product | View Product | View Product | View Product |
![]() | ![]() | ![]() | ![]() | |
Brand | Arrow | DEWALT | DEWALT | DEWALT |
Name | 5/8 in. Brad Nails (1000-Pack) | 1 in. x 18-Gauge Brad Nails (2500 per Pack) | 1-1/4 in. x 18-Gauge Brad Nails (2500 per Pack) | 3/8 in. Heavy Duty Staples (5000-Pack) |
Price | $397 | $697 | $898 | $1094 |
Ratings | (45) | (245) | (289) | (48) |
Staple Width (in.) | ||||
Staple type | ||||
Assembled Depth (in.) | ||||
View Product | View Product | View Product | View Product |
if works with Arrow brand T50 staples should work fine with Arrow brand brads
Hello, The Porter Cable BN125a nail gun uses 18 gauge brad nails from 5/8" to 1 1/4", so these will work. Hope this helps. - Your Arrow Fastener Team
Hello, thanks for your question. These Arrow 5/8 in. brad nails are compatible with the Stanley TRE550Z tool. – Your Arrow Fastener Team
Hello, Because you didn't mention a specific tool, we can't answer your question directly. However, our brad nails are available in lengths up to 2 inches. However, we would suggest a nail that is longer than 5/8" for this application to allow adequate substrate penetration for the baseboard and drywall. If you contact us and let us know which tool you're using, we can better assist you. Please feel to reach out to us directly at customercare@arrowfastener.com or 800-776-2228. -Your Arrow Fastener team
Hey Kenny, you can find the availability of the 3/4-inch brad nail and all of our other brad nails here: https://www.arrowfastener.com/fastener-category/nail/brad-nails/. If you have any other questions, don't hesitate to reach out to us at customercare@arrowfastener.com or 800-776-2228. -Your Arrow Fastener team
Hey there, these are 18-gauge nails, so they should work in any 18-gauge nailer as long as the tool was designed to fire 5/8-inch brad nails. If you'd like, you can send the model number or a picture of the tool to customercare@arrowfastener.com, and we will provide a more specific answer. -Your Arrow Fastener team
Yes, the T50PBN works with these BN1810CS brad nails. You can load the brad nails as shown here: http://bit.ly/t50pbn-nails. If you have any other questions, feel free to shoot us an email at customercare@arrowfastener.com or give us a call at 800-776-2228. -Your Arrow Fastener team
Hello, there. These brad nails will work in the DeWalt stapler or nailer if the tool was designed to fire 18-gauge brad nails in 5/8-inch. If you email the specific model number of your stapler/nailer to customercare@arrowfastener.com, we can provide more specifics. -Your Arrow Fastener team
They slide in on only the 1 side
Hey there, as long as the nailer shoots 18-gauge brad nails in 5/8-inch, these should work fine. If you have any more questions, feel free to reach out to us directly at customercare@arrowfastener.com or 800-776-2228. -Your Arrow Fastener team