|Product Height (in.)||.875 in||Product Length (in.)||2.75 in|
|Product Width (in.)||.875 in||Wheel Diameter (in.)||3/4 in|
|Abrasive Material||Steel||Application||General Purpose|
|Package Quantity||1||Power Tool Accessory Type||Sanding/Grinding/Polishing Accessory|
|Returnable||90-Day||Sanding, Grinding and Polishing Accessory Type||Wire Wheel/Brush|
|Tools Product Type||Power Tool|
A: yes fits any drill if is 1/2 inc ok
A: I think it would fit any drill. It fits just like a drill bit.
A: I try to keep my speed under 9000rpm and always remember to wear safety goggles
A: The maximum rated speed is more than you can handle, I ASSURE you. Buckle up. Vroom vroom
A: I would be surprised if it did what you wanted. I purchased this to remove rust from a pair of wrought iron planters. The brush did nothing. So I attached the brush to a more powerful drill and the same lack of results. I ended using 60 grit sandpaper to remove the old paint and rust. I also purchased a wheel brush from the same manufacturer and it removed almost no paint and rust. While sand paper is not a solution for you, what about a razor blade scraper?
A: yes is good for removed rusti or removed paint ok
A: No, it will not fit a 1 1/2 in Di Grinder.