1 Gal. #PFC-10 Deep Terra Cotta Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint

Hi Cassandra, thanks for your question. We don't recommend using our 1-Part Epoxy Floor Paint on vertical surfaces. Instead, you can use one of our exterior wall paints, such as our Premium Plus Exterior paint. Good luck with your project! -Christina

Hi Mike, thanks for reaching out. Our 1-Part Epoxy Paint is not designed to fill cracks/chips in your concrete. It's best to use our Concrete Crack Filler to repair these areas before applying this paint. Have a great day! -Christina

Hi Emilyemily, thanks for reaching out with your question. Yes, you can apply our 1-Part Epoxy onto your basement concrete floor. Before applying our coating, you want to ensure the surface is clean, sound, dry, and free of any dirt, oil, and grease, and that you properly prep the surface. If you have other questions or concerns, please reach out to us directly; we are always happy to help. -Angie

Hi Bobby, thank you for your question. As it turns out, our Concrete & Garage 1-Part Epoxy Coating is not a waterproof coating. Please feel free to reach out to us directly if you have any other questions. -Adelina

Hi Scott, thanks for reaching out with your question. Since your patio has a broom-finished texture, it should already provide the surface profile needed for good adhesion. However, to determine whether etching is necessary, I recommend sprinkling a few drops of water on the surface; if they quickly absorb, the surface is porous, and it doesn’t need to be re-etched. If the water drops bead up or don’t absorb and remain on the surface, you’ll need to re-etch the surface and clean it before applying the new coating. Good luck with your project, and should you have any other questions, feel free to reach out directly to us! -Angie

Hi Mike, thanks for your question. Please reach out to us directly to learn more about your project and to assist you best. We are always happy to help! -Alex

Hi Shelly, thanks for your questions. Behr 1-Part Epoxy is ok for interior concrete floors. Once the paint film has cured, our paints are ok and don’t pose a threat to persons or animals coming into contact with the paint by sitting or touching. If you have other questions or concerns, please reach out to us directly; we are always happy to help. -Alex

Hi Tony, thank you for your question. As it turns out, our Concrete & Garage 1-Part Epoxy Coating needs to dry for at least 24 hours before any light foot traffic and 72 hours for any heavy foot traffic. Have a great day! -Adelina