#1 Home Improvement Retailer

Internet # 321465923

Model # 629401

Store SKU # 1008202007

Exclusive

1 gal. #PFC-68 Silver Gray Textured Low-Lustre Enamel Interior/Exterior Anti-Slip Porch and Patio Floor Paint

$42.98
Apply Now
Pay $17.98 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card
  • Ideal for wood or concrete porches, patios, walkways, and more
  • Textured concrete paint that provides slip-resistance
  • Resists scuffing, fading, cracking, and peeling
  • View More Details

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

Use BEHR PREMIUM Floor Coatings Acrylic Latex Porch and Floor Paint for painting basements, porches, floors, decks and patios and for a variety of other indoor and outdoor projects to enhance slip resistance. This texturized Low-Lustre acrylic latex paint is resistant to UV damage, scuffing, fading, cracking and peeling, and it offers improved hiding properties to provide efficient coverage. Cleans easily with warm, soapy water.

Highlights

  • Texturized, slip resistant formula
  • Use BEHR PREMIUM Textured Low-Luster Enamel porch and patio anti-slip floor paint on properly prepared or previously painted interior/exterior surfaces, ideal for wood or concrete porches, floors, decks, basement floors, patios, siding, trim, furniture, and trellises
  • 1 gal. covers up to 125 sq. ft. depending on color selected and surface porosity, spread rate varies, depending on the surface texture, porosity and application method, additional coats may be required to ensure proper coverage, optimal hide and durability
  • We recommend applying this product when the air temperature is 50°F - 90°F, this is the ideal weather condition to ensure proper adhesion
  • Recoat in 4 hours to 6 hours
  • Use a high quality 3/8 in. nap roller cover, nylon/polyester brush or a texture sprayer capable of 1.0 GPM with a 3 mm tip, for smooth surfaces, use a 1/4 in. nap roller, do not use with airless sprayer, do not use on areas subject to automotive tires or hydrostatic pressure
  • For interior wood, use a product such as BEHR PREMIUM number 75 all-in-one primer and sealer, for exterior wood, use a product such as BEHR PREMIUM number 436 multi-surface primer and sealer, for interior/exterior concrete or masonry, over uncoated surfaces, use a product such as BEHR PREMIUM number 880 concrete and masonry bonding primer
  • Mildew, scuff and fade resistant paint finish
  • Improved hiding capability allows for excellent coverage
  • Texturized low-luster enamel finish provides a stylish appearance
  • 100% acrylic latex base provides durability
  • Available in 2000+ custom colors and computerized color matching (available in store only)
  • Actual paint colors may vary from on-screen and printer representations
  • Online Price includes a PaintCare fee in the following states: CA, CO, CT, DC, IL, MD, ME, MN, NY, OR, RI, VT, WA
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 321465923

Model # 629401

Store SKU # 1008202007

Specifications

Dimensions

Container Size

1 Gallon

Coverage Area (sq. ft.)

125 sq ft

Details

Application

Concrete Porch & Patio

Application Method

Brush, Roller, Textured Sprayer

Base Material

Latex

Color Family

Gray

Color/Finish

Silver Gray

Dry To Touch Time (hh:mm)

02:00

Interior/Exterior

Exterior, Interior

Kit

No

Maximum Optimal Temperature (F)

90

Minimum Optimal Temperature (F)

50

Number per Package

1

Paint/Stain Clean Up

Soap & Water

Paint/Stain Features

Primer Required, Skid Resistant, Textured

Recommended Number of Coats

2

Returnable

Non-Returnable

Sheen

Textured Low Lustre

Stain & Sealer In One

No

Surface Location

Basement Floor, Deck, Patio, Pool, Pool Deck

Surface Material Use

Brick, Concrete, Stone, Wood

Time before recoating (hours)

4

Transparency

Solid

Vertical/Horizontal

Horizontal

Warranty / Certifications

Manufacturer Warranty

BEHR Limited Warranty

Questions & Answers

Can this paint be used over encapsulated mastic? Does it require a primer first?
ByOct 6, 2026
1 Answer | 
Answer This Question

Hi Jimmy, thanks for your question. As it turns out, we do not recommend any of our products for mastic. I recommend reaching out to your local Home Depot for a product recommendation that will suit your project best. -Alex

By|Oct 8, 2026


    What is the wet mill thickness per coat?
    BySep 22, 2026
    1 Answer | 
    Answer This Question

    Hi Rendell, thanks for the question. The wet thickness per coat is 10.7 mils. If you have additional questions about your project, please reach out to us directly. Our customer care team is happy to help. -Ronald

    By|Sep 22, 2026


      do I need a sealer with this
      BySep 19, 2026
      1 Answer | 
      Answer This Question

      Hi MerryB, thanks for reaching out with your question. Applying a clear sealer over our Porch & Patio Floor Paint is not required. If the surface you applied our Porch & Patio Floor Paint to is wood, we would not recommend applying a clear sealer over it, as we haven't tested this application and it can cause the coating to become slippery. However, if you applied it to a concrete surface and would like to add a clear sealer over it, you can apply our Wetlook Sealer or our Low Lustre Sealer. Have a great day! -Angie

      By|Sep 21, 2026


        Does this product need to be sealed after application
        BySep 17, 2026
        1 Answer | 
        Answer This Question

        Hi Drnnis, thank you for your question. Our Porch & Patio Floor Paint is a stand-alone coating that does not require a topcoat sealer. Have a great day! -Adelina

        By|Sep 17, 2026


          How long until I can put furniture on it?
          BySep 11, 2026
          1 Answer | 
          Answer This Question

          Hi Sjk600, thanks for reaching out. We recommend letting the last coat dry for at least 72 hours before moving your furniture back on the surface. Enjoy the rest of your day! -Christina

          By|Oct 11, 2026

            (1)

            How much coverage does a 5 gal cover
            BySep 8, 2026
            1 Answer | 
            Answer This Question

            Hi Tyler, thanks for the question. A 5-gal bucket of our Porch & Patio Floor paint covers 2000 sq. ft. per coat. Have a great day! -Alex

            By|Sep 9, 2026


              How. Many coats needed
              BySep 1, 2026
              1 Answer | 
              Answer This Question

              Hi Ronald, thanks for the question. You can apply one coat, but up to 2 coats maximum. Have a great day! -Alex

              By|Sep 1, 2026


                If the wood is new does it need to be primed prior to painting?
                ByAug 28, 2026
                1 Answer | 
                Answer This Question

                Hi Daniel, thank you for your question. Yes, new wood needs to be prepared before painting. Use the All-In-One Wood Cleaner No. 63 to remove mill glaze and open the pores of the wood. Once dry, use the Multi-Surface Primer and Sealer No. 436. Good luck with your project! -Giovanna

                By|Sep 8, 2026

                  (1)

                  Viewing 1-8 of 712

                  Customer Reviews

                  4.5 out of 5

                  • 4.5 out of 2,873 reviews
                  • 81% recommend this product
                  Filter by:
                  Showing 1-10 of 2,873 reviews
                  Second coat has terrible adhesion
                  I primed and top coated the plywood subfloor of my 3 season porch with this product over a month ago. I applied two coats of this paint over the primed plywood and waited 4 hours between coats. Now a month later the top coated is easily pulled off by just some painters tape… the primer and the first coat seem to be properly adhered but the second coat seems to have terrible adhesion.
                  by
                  Response from BehrSep 28, 2026
                  Hi Mike, thanks for your review. I'm sorry to hear about the peeling you're experiencing. I assure you this is not typical and I can understand your disappointment. As it turn out, we do not recommend our coating over plywood floor that will have direct foot traffic as it can cause the coating to fail. Customer satisfaction is important to, and we appreciate your feedback. Please reach out to us directly for further assistance; we'd like to learn more about your project to assist you best. -Alex Behr
                    Peels off within a year
                    Started to peel off in about a year. We primed and prepped the wood too. The area where it’s peeling is at the edge of the patio, and gets hot in the sun. Very disappointed. This should have lasted much longer.
                    by
                    Response from BehrJul 14, 2026
                    Hi Chris, thank you for your review. I'm sorry to hear that surface peeled so soon. This is not the experience we want for our customers, and I can understand your disappointment. To get your project back on track, I recommend removing the loose coating, cleaning the surface with the All-In-One Wood Cleaner No. 63, allowing the wood to dry, and priming with the Multi-Surface Primer and Sealer No. 436. Then, recoating following the spread rate. We appreciate your feedback, and if you need further assistance, please reach out to us directly. Our Customer Care team is happy to help! -Giovanna Behr
                      1 found this review helpful
                      This paint was applied over existing water-based stain, and other than the smooth areas, covered it perfectly. Very thick and easy to apply
                      by
                      • Verified Purchase
                      1 found this review helpful
                      We re did our front porch and the while walkway eith this paint. Really good adherence and anti slip features
                      by
                      Painted my concrete store room floor in my house. Great color and coverage one coat, water base easy cleanup, dense color hid all the flaws in the floor and applied well with painting pads.
                      by
                      • Verified Purchase
                      Application (2 coats) went as expected with no surprises. The problem appeared after coats dried - there is a clearly visible line from where the sections of the floor were painted. Saw the lines after the first coat dried, assumed I needed a second coat, but after the second coat dried, the sections painted were still visible by lines (see photos). Coverage was otherwise good, durability to be determined as I'm just starting to move equipment back into the room.
                      by
                      Love the results!
                      We had gross indoor/outdoor carpet in our sunroom and pulled it out. After thoroughly etching, using a wire scrub brush and Behr concrete etching solution, and rinsing a few times, I let it dry 24 hours. I applied the first coat of Behr concrete paint, waited 12 hours and applied a second coat. It covered great! I used the color washed khaki and one gallon covered about 200 square feet (with two coats). I absolutely love the results! I’ll see how this stands up and then do the rest of our patios and porches. For reference of season weather etc, this was a sunny, breezy weekend in Oklahoma. The humidity was low so that probably helped! 😊
                      by
                        • Recommended
                        Beautiful outcome for my ceramic tile floors!
                        I painted over my outdated ceramic tile floors with this paint. I had it tinted with the blackest black they have. Beautiful outcome for my kitchen, breakfast nook, and entryway from my garage. I’m in love with my floors again and it was very cost effective!
                        by
                          • Recommended
                          2 found this review helpful
                          Very Disappointed
                          I applied this to my deck in 2023 and have noticed some peeling. Today I started to clean and now it is really peeling everywhere. Not sure why this is happening. Used on my front porch last year and it's not peeling at all.
                          by
                          Response from BehrSep 12, 2025
                          Hi Susan72, thank you for your review. I'm sorry to hear about the peeling you're experiencing. I assure you, this is not the experience we want for our customers, and I understand your disappointment. To fix this, I recommend removing the loose coating, cleaning, priming, and touching up/recoating per label instructions. Customer satisfaction is important to us, and we appreciate your feedback. Please reach out to us directly for further assistance; we are always happy to help! -Alex Behr
                            1 found this review helpful
                            This customer chose to rate the product and not provide text.
                            by
                            • Verified Purchase
                            Showing 1-10 of 2,873 reviews

                            Compare Key Features

                            current item

                            Product Snapshot

                            Ideal for homeowners looking for slip-resistant, mildew-resistant paint, making porch and patio projects easier.
                            Ideal for interior/exterior concrete and wood floors, resisting mildew, scuffing, and fading. A great choice for durable, low-lustre finish.
                            Ideal for homeowners looking for slip-resistant, mildew-resistant paint, making porch and patio projects easier.
                            Ideal for customers who want anti-slip, mildew, and fade resistance, ensuring durable, safe surfaces.

                            UV Resistance

                            Anti-slip finish

                            Mildew resistance

                            Coverage per gallon

                            Up to 125 sq. ft.
                            200 sq. ft. - 400 sq. ft.
                            Up to 125 sq. ft.
                            Up to 125 sq. ft.

                            Drying time

                            2 hours to touch, 4-6 hours to recoat
                            1 hour
                            2 hours to touch, 4-6 hours to recoat
                            2 hours