#1 Home Improvement Retailer

Internet #308921490

Model #90005

Store SKU #1004314346

5 gal. #PFC-28 Desert Sandstone Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint

$19700
Apply Now
Pay $172.00 $197 when you open a new card. info
Apply for a Home Depot Consumer Card
  • Now even better with an improved adhesion formula
  • Resists peeling caused by hot tires
  • Available in custom colors and computerized color matching
  • View More Details
Store
0 in stock
Text to Me
How to Get It

Frequently Bought Together

+
+
Price:
$19700

Product Overview

Concrete driveway coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Protect and Enhance

A premium floor coating providing beauty and protection against hot tire pick-up and stains

Concrete garage floor coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Durable, Protective Floor Coating

Epoxy floor coating for garage floors, driveways, porches, patios, and interior concrete floors

Concrete garage floor coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Refresh Concrete Surfaces

Use this coating to transform weathered concrete surfaces into a showroom finish

Concrete surface being stripped with a concrete paint stripper

STEP 1

Use a paint stripper to remove loose or peeling paint

Concrete floor being etched with a concrete etcher

STEP 2

Clean and etch surfaces until it feels like 150 grit sandpaper

Concrete floor being rinsed with hose and water

STEP 3

Rinse surface thoroughly and allow to dry

Concrete floor being primed with BEHR PREMIUM Concrete Bonding Primer

STEP 4

Optional for high traffic areas; prime with No. 880 Concrete and Masonry Bonding Primer

Concrete driveway coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Prevents hot-tire pickup

Ideal for driveways

Concrete garage floor coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Interior Drivable Surfaces

Ideal for garage floors

Concrete patio surface coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Exterior Surfaces

Ideal for concrete porches and patios

Concrete walkway coated with BEHR PREMIIUM Concrete and Garage 1-Part Epoxy Coating

Exterior Steps and Entryways

Ideal for walkways

Interior concrete floor coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Interior Surfaces

Ideal for Interior Concrete Floors

Product image of BEHR PREMIUM Anti-Slip Additive

Optional Finish

Consider adding Non-Slip Additive for added textured

The advanced Self-Priming 1-Part Epoxy Concrete and Garage Floor Paint is ideal for interior and exterior concrete floors. It resists peeling caused by hot tires. It provides a stain, chemical and weather resistant finish.
  • Ideal for garage floors, driveways, patios and walkways
  • Surfaces stay cleaner longer
  • Satin finish gives floors a nice shine
  • Easy, no-mix formula
  • UV protection
  • Available in pre-mix slate gray
  • Cleans with soap and water
  • Online Price includes a PaintCare fee in the following states: CA, CO, CT, DC, ME, MN, NY, OR, RI, VT, WA
  • Click here to learn more about Eco Options and Clean Air


  • California residents

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Garage Floor Paint

5 gal. #BL-W13 Silver Polish Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint
current product
5 gal. #PFC-28 Desert Sandstone Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint
5 gal. Slate Gray Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint5 gal. White Self-Priming 1 Part Epoxy Interior/Exterior Concrete and Garage Floor Paint
BrandBEHR PREMIUMBEHR PREMIUMBEHR PREMIUMBEHR PREMIUM
Name5 gal. #BL-W13 Silver Polish Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint5 gal. #PFC-28 Desert Sandstone Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint5 gal. Slate Gray Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint5 gal. White Self-Priming 1 Part Epoxy Interior/Exterior Concrete and Garage Floor Paint
Price
$19700
$20800
$20800
$20800
Ratings
(1064)
(256)
(133)
(213)
Container Size5 Gallon5 Gallon5 Gallon5 Gallon
Paint/Stain FeaturesChemical Resistant,Driveable Surface,Durable,High Foot Traffic,Mildew Resistant,Paint & Primer in One,Prevents hot tire pickup,Stain Resistant,UV/Fade Resistant,WashableChemical Resistant,Driveable Surface,Durable,High Foot Traffic,Mildew Resistant,Paint & Primer in One,Prevents hot tire pickup,Stain Resistant,UV/Fade Resistant,WashableChemical Resistant,Driveable Surface,Durable,High Foot Traffic,Mildew Resistant,Paint & Primer in One,Prevents hot tire pickup,Stain Resistant,Tintable,UV/Fade Resistant,WashableChemical Resistant,Driveable Surface,Durable,High Foot Traffic,Mildew Resistant,Paint & Primer in One,Prevents hot tire pickup,Stain Resistant,Tintable,UV/Fade Resistant,Washable
Base MaterialEpoxyEpoxyEpoxyEpoxy
Coverage Area (sq. ft.)2500250025002500
Substrate/Surface Usage TypeBrick,Concrete,StoneBrick,Concrete,StoneBrick,Concrete,StoneBrick,Concrete,Stone
SheenSatinSatinSatinSatin
Epoxy Type1 Part Epoxy1 Part Epoxy1 Part Epoxy1 Part Epoxy
TransparencySolidSolidSolidSolid
KitNoNoNoNo
Surface LocationBasement Floor,Driveway,Garage Floor,Patio,Pavers,Pool DeckBasement Floor,Driveway,Garage Floor,Patio,Pavers,Pool DeckBasement Floor,Driveway,Garage Floor,Patio,Pavers,Pool DeckBasement Floor,Driveway,Garage Floor,Patio,Pavers,Pool Deck
View ProductView ProductView ProductView Product

Specifications

Dimensions

Container Size5 GallonCoverage Area (sq. ft.)2500

Details

Application MethodBrush,Paint Sprayer,RollerBase MaterialEpoxy
Color FamilyYellowColor/FinishDesert Sandstone
Dry To Touch Time (hh:mm)01:00Epoxy Type1 Part Epoxy
Interior/ExteriorExterior,InteriorKitNo
Maximum Optimal Temperature (F)90Minimum Optimal Temperature (F)50
Number per Package1Paint/Stain Clean UpSoap & Water
Paint/Stain FeaturesChemical Resistant,Driveable Surface,Durable,High Foot Traffic,Mildew Resistant,Paint & Primer in One,Prevents hot tire pickup,Stain Resistant,UV/Fade Resistant,WashablePaint/Stain/Waterproofer Product TypeConcrete Basement & Garage
Recommended Number of Coats2Returnable90-Day
SheenSatinStain & Sealer In OneNo
Substrate/Surface Usage TypeBrick,Concrete,StoneSurface LocationBasement Floor,Driveway,Garage Floor,Patio,Pavers,Pool Deck
Time before recoating (hours)4TransparencySolid
Vertical/HorizontalHorizontal

Warranty / Certifications

Manufacturer WarrantyLimited Warranty

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 3.5
    out of 256 reviews
  • 60%recommend this product
Filter by:
Showing 1-10 of 256 reviews
Paint colors do not match
Color did not match the previous gallon I purchased in June 2022
by
  • Verified Purchase
  • Recommended
Paint is awesome, covers well. My 1st time using BEHR, will buy BEHR paint for my next project...
Paint is awesome, covers well. My 1st time using BEHR, will buy BEHR paint for my next project...
by
  • Verified Purchase
  • Recommended
1 found this review helpful
Not happy with this product!!!!
Not happy with all the time and money in this product, not only did it peel once, I reapplied and it did again, I done!
by
Response from Ronald, Behr Customer CareJul 28, 2022
Hi there, thank you for reviewing our paint. I’m sorry that you’ve had an issue with the 1-Part Epoxy peeling twice. This is not typical, and I can understand your disappointment. I recommend removing the loose coating by either power washing or sanding, then etching the bare concrete. After the floor is etched and clean apply our Concrete & Masonry Bonding Primer and then re-applying the 1-Part Epoxy Concrete & Garage Floor Paint. I’ve also reached out to you via email to learn more about your project and assist you with this further. Thank you again for taking the time to share your experience with us, and I hope to hear from you soon! -Ronald
    not up to behr's standards
    used this product based on past experience with behr's paint. My wife use to work for Behr store years ago. Followed directions to the letter. Walked into garage today, two months after application, and product was peeling under tire marks. Garage floor was professionally ground, cleaned and etched. Not good advertisement for Behr after all the success we have had over the years with Behr products. Would not recommend this product.
    by
    Response from Christina, Behr Customer CareJul 26, 2022
    Hi there, Thanks for taking the time to review our Concrete & Garage 1-Part Epoxy. I'm sorry to hear about the peeling under your tires, but please know I'm here to help. To fix this, I recommend removing the peeling areas and sanding the edges smooth with 180-grit sandpaper. Then, clean and etch any bare concrete with muriatic acid until it feels like 150-grit sandpaper. Finally, you can spot prime with our Concrete Bonding Primer No. 880 (for additional adhesion) and touch up with leftover paint. I've also reached out to you via email to get more info about your project and further assist. Thanks again for taking the time to provide your feedback, and I hope to hear back from you soon! - Christina
      Perfect for basement floors
      [This review was collected as part of a promotion.] Have been using this product in custom homes for 10 years plus. Ideal for storage areas and furnace rooms in finished basements. Only one coat needed. Helps keeps dust down. Homeowners happy with it. Gives it a finished look for minimum expense.
      by
        • Recommended
        Hot tire pickups
        We applied this epoxy paint following the instruction one month ago. We waited the entire month, however the first time we parked our car inside, it left hot tire pick-ups. Very disappointed, and i want to know the best way to repair it, without redoing everything. Can I just touch it up? Will applying a top clear coating be helpful with adhesion? If so, what kind of top clear coating should I use?
        by
        Response from Joanne, Behr Customer CareJun 24, 2022
        Hi EricZ, thank you for your review. I'm so sorry the paint pulled up under the tires. To repair this, I recommend removing any loose paint, etching the bare concrete spots, spot priming with our Concrete & Masonry Bonding Primer No. 880 to help with adhesion in those areas, then touching up with paint. Also, an additional topcoat isn't required over this paint. But if you prefer to add a clear sealer, you could use our Wet-Look Sealer or our Low-Lustre Sealer. Customer satisfaction is important to us, and we appreciate your feedback. I'll reach out to you directly to assist you with this further. Thank you again for taking the time to share your experience with us, and I hope to hear from you soon! -Joni
          Works OK on Garage, Exterior could be better
          [This review was collected as part of a promotion.] I bought this product for my garage floor and concrete break wall surface 1 year ago. The garage floor has held up well , other than hot tire parking spots lifting. However, the concrete exterior break wall has cracked & peeled up in approximately 40% of the surface area. I have used this product in the past (~5 years ago) with better results. The surface was prepped the area per recommendations. I am will see if BEHR will warrantee this product & update my review accordingly.
          by
            • Recommended
            Easy to use!!
            [This review was collected as part of a promotion.] I bought this product to use in my basement. The floor came out amazing!! Such a wonderful upgrade and such and easy product to use to do it!! My family and friends love it!! They were amazed that I did it myself!!
            by
              • Recommended
              Bad cans
              I brought 3 cans to do my garage floor 1can fine next can watery. Took back to Home Depot the lady asked what was wrong I explained. Got another can painted 2 coats dried light n dark same can, applied coat at the same time. Next can dry with bubbles n it. Now I don’t know what to do
              by
              Response from Joanne, Behr Customer CareMay 31, 2022
              Hi Frog7527, thank you for your review. I'm so sorry one can was watery, and the other cans didn't look like the same color and started to bubble. I recommend letting the paint dry, sanding off any bubbling paint, spot etching the bare concrete spots, and letting the surface fully dry to prep the garage floor again. Then I recommend spot priming those areas with our Concrete & Masonry Bonding Primer No. 880 to help with adhesion, touching up with paint, and recoating across the surface for uniformity. Before recoating, I suggest mixing cans of the same color together in a larger container to help keep the color uniform during application, as the color from can to can could vary just slightly. Customer satisfaction is important to us, and we appreciate your feedback. I'll reach out to you directly to assist you with this further. Thank you again for taking the time to share your experience with us, and I hope to hear from you soon! -Joni
                Disappointed
                Working on the basement I chose Behr for my previous experience with the wall paints. Having 2 year old concrete around the perimeter from drainage install I wanted an even color throughout. Used the Behr primer expecting the best results. Top coat took 2 days to dry in the high humidity at the time. The bleed through was not evident during top coat application. Wife and I have decided to sell the house so I’m not going to do anything further. But, if we were staying I would seek out a different product to apply.
                by
                  Showing 1-10 of 256 reviews