10.25 in. 4-Compartment Bucket Stacker Small Parts Organizer for Bucket Storage in Yellow
$823
- Nests inside most 5 Gal. buckets for small parts organization
- Includes 4 compartments and a center hole for storing drill bits
- Features a molded center carrying handle
- View More Details
Product Details
Specifications
Questions & Answers
3Questions
Q:Will this stack in combination with the yellow parts organizer?
by|Jan 30, 2023
1 Answer
Q:Descriptipn reads 12 in and stacks insige 5 gal bucket. Standard bucket is 11 in diam. Should description read 10.5?
by|Jun 26, 2016
0 Answer
Q:what all comes with this and if sent to store is shipping free?
by|Apr 11, 2016
1 Answer
Showing 1-3 of 3
Sep 6, 2021
light-duty parts holder
I have previously purchased products from Bucket Boss and have been very impressed with the quality and utility of their products. This one, though, I'm really having a hard time figuring out where it 'fits'. As you can see from the pictures, it is sized to fit in the bottom of a 'Homer Bucket'. The fabric Bucket Boss fits over the lip of the bucket, but it cannot go into or be taken out of the bucket without removing the fabric tool holder. It appears that it is made as a stackable parts holder to be used outside of a bucket (not what I was expecting). If that is the case, then it is made to be stacked . That, however would make it so that the parts inside couldn't be seen without lifting the bins. As a standalone parts holder, it could be helpful to have 4 compartments for holding parts. I'm probably missing something, but I can't see the 'use niche' where this would fit.
by
Sep 2, 2021
Very handy
It comes in a box 11” X 11” X 11” No additional packing materials
10 1/8” diameter across the top
Total depth is 3” and 1” of that sits above the rim of your bucket. It is very lightweight at 7 1/8 ounces
Underneath is divided into 2 sections with a 1” gap running the length (under the handle portion) of the sections
Handle sits 1 ¼” above the divider and is 4 ¼” long, half-round and the open (underside) section of the handle is 3 3/16” long & ¾” wide and is curved so it fits your hand. The top of the handle is flat and open, divided into 2 equal sections
The crosspiece that bisects the holder underneath the handle is marked on the top in 1/4” increments on one half and labeled “1, ½, 2, ½, 3, ½, 4” but these are confusing as you really don’t know where the measuring starts/stops. The distances are correct according to my tape measure. The other half has whole numbers from 3-10 but I have no idea what the numbers represent; they are 3/8” apart. The crosspiece that is on the same line as the handle has, on one end, 4 holes, each labeled with its diameter in inches: 1/8, ¼, 3/8, ½. On the opposite side, there is one hole ¼” in diameter – great for Torx screwdrivers and better for longer shanked drivers as opposed to the shorties. IN THE PICTURES, I COLORED THE NUMBERS WITH BLACK MARKER SO YOU CAN READ THEM, OTHERWISE IT’S REALLY HARD TO SEE THE NUMBERS.
The 4 compartments across the top are very convenient for miscellaneous parts (screws, nails, brads, etc.) or a can of soda. This top fits snugly into the top of your Home Depot orange bucket.
by
Sep 1, 2021
Tough and Handy Parts Organizer
The Bucket Boss 10.25 inch 4-Compartment Bucket Stacker is a handy and tough little organizer. The fact that more bucker stackers can be "stacked" on top is a great feature. Nice when doing a job and need lots of different small items; who doesn't have an extra bucket sitting around? They stack (a maximum of 5) into any standard 5-gallon bucket. It includes a handle, drill bit sizer, measuring rule, and a holder for your pencil. Great gift idea!
by
Aug 31, 2021
Great Storage and Organizing Device
The Bucket Stacker (~3" deep) is the little brother to the Super Stacker (~4" deep) in a line of products from Bucket Boss. It's very useful for storing/organizing small parts & tools in the shop or taking on the road; having tons of fasteners and other small parts, I use it in my shop extensively as a worktop space saver. As the name says, it can be stacked with others, including the larger Super Stacker, and is sized to fit in any 5-gallon bucket. It has both a short ruler and provisions for drill bit storage, but I do not see value added in these features. My comments from above are shown in the attached photos.
I would recommend this product to a friend.
by
Aug 25, 2021
Great for small things
I was working on changing a cabin filter in my vehicle and I had many screws to take off. The Bucket Boss allowed me to put the screw into it instead of having them all over the place. The Bucket Stacker has holes in the handle so you can store screw drovers and other small tools. The Stacker did not fit snuggle in my bucket but it made my job much more easy to do without loosing screws.
by
Aug 24, 2021
Too small
This small parts bucket organizer is ok if you put it on the bottom of a bucket. Putting on the bottom kind of defeats the purpose of your small items being at your fingertips.
Besides, if this organizer is to be accessible it would have to be on top of the bucket, being on the bottom means nothing else can go in the bucket or you will be covering up your oganizer.
All that being said, if you merely use the tray by itself it is a nifty little tote.
by
Aug 23, 2021
Bucket Stacker doesn't work as expected
The Bucket Boss bucket stacker does not sit on the rim of a five gallon bucket, it actually slips down inside of the bucket. I am always looking for something to bring my tools and supplies (hammer, screwdrivers, drill/driver, pliers, screws, nails, zip ties, wire nuts, and etc.) into the attic or wherever my next project takes me. If I put everything in a bag or a bucket, the small items (screws, wire nuts, nails, and etc.) fall to the bottom of the bag or bucket and I can’t find them. I assumed that my tools would go in the bottom of a five-gallon bucket and the small items would go into the Bucket Boss Bucket Stacker and sit on the rim of the bucket. But, instead the bucket stacker slips include the bucket. This doesn’t work very well because if my put my tools in the bottom of the bucket, the bucket stacker doesn’t sit straight inside the bucket and the small items fall out.
The bucket stacker is probably a good idea if you want to store small items in a large bucket and label the bucket with everything stored inside. However, this was not my initial thought on how the Bucket Boss Bucket Stacker worked and how I intended to use it.
by
Aug 21, 2021
Great bucket organizer
I received the bucket organizer a couple of days ago. It is made of a hard plastic and the bucket has four compartments to carry the small tools around. It is made of a yellow color and a steady handle. I love the yellow color and how sturdy it is. I used my bucket boss inside and outside instead of carrying my tools box to do my jobs that don’t require many heavy tools.
by
Aug 19, 2021
handy parts bin
BUCKET BOSS 10.25 in. 4-Compartment Bucket Stacker is a neat product that lets you put some of the items you may need to complete a job and have them ready at hand. They are stackable and fit in the Home depot bucket nice. I am getting more for my other buckets and to be able to stack more in a bucket and have more compartments to put parts in. The four compartments are a good size just might need a few more to separate the little parts. It is nice they each have a handle too for transporting out of a bucket. It might be nice if you could take one out and have it able to sit on the edge of the bucket.
by
Aug 19, 2021
Nice accessory
BUCKET BOSS 10.25 in. 4-Compartment Bucket Stacker Small Parts Organizer for Bucket Storage in Yellow - I have been pondering getting one of these for a while. Doing a deck project and this worked great holding different sized nuts, bolts, washers, nails conveniently IN the bucket that I have a stool top for. I would just pick up the bucket and move everything at once as I progressed along the deck. Way more convenient that moving multiple trays/boxes of parts. Didn't use them but there are convenient measuring spaces on the deviders.
by
Frequently Bought Together
Price:
$823
Explore More on homedepot.com
Appliances
Flooring
Outdoor Garden
