#1 Home Improvement Retailer

Internet #206812826

Model #73004698

4 ft. Nantucket Gray Vinyl Lattice Cap (2-Pack)

$760
/package
  • Designed to finish the edges of your lattice panels
  • This vinyl lattice cap is both weather and impact resistant
  • Easy to install and match to vinyl lattice panels
caret

Product Details

The 0.75 in. x 1.188 in. x 4 ft. Nantucket Gray Vinyl Lattice Cap Moulding is designed to finish the edges of your lattice panels (not included). The moulding features a vinyl construction that is both weather and impact resistant. It features a low-maintenance design that is easy to install and maintain. Lattice moulding will not discolor or show scratches over time. The moisture-resistant vinyl helps provide long-lasting use.
  • Used with the vinyl lattice to complete your lattice project
  • Matches gray color of lattice
  • Durable impact resistant plastic
  • Vinyl design makes lattice moulding low maintenance
  • Tolerant of extreme heat and cold
  • 2-Pack moulding caps include two 4 ft. sections
  • Shop more Lattice to find the right option for your porch or deck!
  • Lattice

    Test Item

  • Return Policy

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
caret

Specifications

caret

Questions & Answers

10Questions
caret
Q:Does this cap fit the Trex lattice panels that are 3/8 inch thick?
by|Jun 28, 2021
1 Answer
Answer This Question

A:  Hello, this works with Veranda lattice. Thanks!

by|Oct 20, 2021
    caret
    Q:can the vinyl cap be put on wood lattice? what I'd like to do is use redwood lattice with this gr...
    by|Dec 9, 2019
    1 Answer
    Answer This Question

    A:  Hi Scott, this cap works with vinyl lattice - thanks!

    by|May 19, 2021
      caret
      Q:I am in need of the 8ft. Nantucket Gray lattice caps and can only find the 4ft. 2-pack which will...
      by|Sep 13, 2019
      3 Answers
      Answer This Question

      A:  You could always get the 8ft divider and trim it to be flush on one side. You can use a utility knife but be careful, it'll cut clean but not as straight. If you use a table saw and guide it might leave it a light grey.

      by|Aug 13, 2022
        1 found this answer helpful

        A:  Hi Butch, these are sold in 8 ft. sections when they are stocked in store. Through .com or special orders you receive 2, 4 ft. sections. Thanks!

        by|Sep 13, 2019

          A:  Local Home Depot stocked only the 4ft. caps, but I was able to order the 8ft caps online.

          by|Sep 14, 2019
            caret
            Q:I need grey 2’ x 8’ lattice—regular, not privacy—can HD cut a 4’ wide pc for me? Please respond ...
            by|Feb 20, 2018
            6 Answers
            Answer This Question

            A:  we had no problem cutting it so i am sure they could do it.

            by|Feb 20, 2018

              A:  I believe that Home Depot offers cutting services, but always cut my own, so have not needed to inquire about that

              by|Feb 22, 2018

                A:  This material is easily cut at home using a hacksaw with 18 teeth to the inch or 22 teeth per inch. If you purchase a plastic triangle square you can mark the molding with either a 45 degree angle or a 90 degree angle. Perhaps the person working in the wood molding department could cut the pieces for you using a Backsaw and their miter box. I suggest questioning your local homdepot before finalizing the purchase.

                by|Apr 5, 2021

                A:  They will cut boards and things, however this item was not stocked and had to ship from mfg. Better ask at your local store.

                by|Feb 20, 2018

                  A:  I have cut the lattice myself using a circular saw. It cuts very easy.

                  by|Feb 23, 2018

                    A:  I suggest you talk to the mill-works person to see if they are willing, and able to cut an 8' length. If there saws will not accommodate an 8' length the material is easily cut with a hacksaw using a blade with either 18 teeth or 22 teeth to one inch of blade. Make two marks at the 2' wide point and snap a red chalk line between them for a straight line , then cut each mark. If you are going to use a molding it will cover any rough cuts or cuts that fall off the mark.

                    by|Apr 5, 2021
                    Showing 1-4 of 10
                    caret

                    Customer Reviews

                    4.3 out of 5
                    (56)
                    • 4.3
                      out of 56 reviews
                    • 91%recommend this product
                    Filter by:
                    Showing 1-10 of 56 reviews
                    The Lattice Cap was supposed to be Nantucket Gray- the same color as the Nantucket Gray Lattice t...
                    The Lattice Cap was supposed to be Nantucket Gray- the same color as the Nantucket Gray Lattice that I purchased. Even though the package was labeled Nantucket Gray, the Lattice Caps were black and did not match the Lattice. Rather than go through the ordeal of returning the caps which took a good bit of time to receive,I made do with gray paint. I shouldn’t of had to do that if whoever prepared the order would have paid attention.
                    by
                    • Verified Purchase
                    3 found this review helpful
                    product is very good , delivery and support sucks...
                    product is very good , delivery and support sucks
                    by
                    • Verified Purchase
                    by
                    • Verified Purchase
                    by
                    • Verified Purchase
                    As expected. I just wish they sold as 8’ pieces...
                    As expected. I just wish they sold as 8’ pieces
                    by
                      by
                        The new lattice on our porch looks great. The...
                        The new lattice on our porch looks great. The edge pieces will make it stay in place much better.
                        by
                          It went on easy Easy to work with...
                          It went on easy Easy to work with
                          by
                            by
                            • Verified Purchase
                            • Recommended
                            Did not fit tightly onto lattice...
                            Did not fit tightly onto lattice
                            by
                            • Verified Purchase
                            Showing 1-10 of 56 reviews

                            Frequently Bought Together

                            +
                            +
                            Price:
                            $760

                            Compare Similar Lattice Accessories

                            current product
                            4 ft. Nantucket Gray Vinyl Lattice Cap (2-Pack)
                            4 ft. Woodland Green Vinyl Lattice Cap (2-Pack)Top Rated8 ft. White Vinyl Lattice Cap8 ft. Nantucket Gray Vinyl Lattice Divider
                            BrandBarrette Outdoor LivingBarrette Outdoor LivingVerandaVeranda
                            Name4 ft. Nantucket Gray Vinyl Lattice Cap (2-Pack)4 ft. Woodland Green Vinyl Lattice Cap (2-Pack)8 ft. White Vinyl Lattice Cap8 ft. Nantucket Gray Vinyl Lattice Divider
                            Price
                            $760
                            /package
                            $760
                            /package
                            $898
                            $1234
                            Ratings
                            (56)
                            (37)
                            (225)
                            (225)
                            Accessory TypeLattice CapLattice CapLattice CapLattice Divider
                            MaterialVinylVinylVinylVinyl
                            View ProductView ProductView ProductView Product