Return this item within 90 days of purchase.
Get an immediate answer with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
The 0.2 in. x 48 in. x 8 ft. Black Vinyl Privacy Diamond Lattice has outstanding physical characteristics. It offers a rare combination of aesthetic appeal and durability, thanks to its natural decay-resistant composition. It can also be used as garden lattice as the vinyl material resists wear from the weather and moisture. The superior dimensional stability means that, when properly installed and maintained, project components are likely to stay straight and flat, and resist warping and cupping - season after season.
Product Height (ft.) | 4 ft | Product Thickness (in.) | 0.2 in |
---|---|---|---|
Product Width (ft.) | 8 ft | Width (ft.) x Height (ft.) | 8 ft x 4 ft |
Color Family | Black | Color/Finish | Black |
---|---|---|---|
Lattice Framing | Framed | Lattice Opening Shape | Diamond |
Material | Vinyl | Number of Panels | 1 |
Product Weight (lb.) | 1.7 lb | Returnable | 90-Day |
Use Type | Garden, Privacy |
Manufacturer Warranty | Transferable Limited Lifetime |
---|
Grid Opening: 1.1"
Classic Diamond: Grid Opening: 2.8, Privacy Diamond: Grid Opening: 1.1, and Privacy Square: Grid Opening: 1.7"
You can cut lattice. We recommend a circular saw blade for plywood/plastics/laminates.
Yes, the vinyl lattice is safe to mount in or near a koi pond as it is made of plastic and resists rot, warping, and fading from moisture and weather.
For bonding vinyl lattice to itself, cyanoacrylate (CA) glue, commonly known as super glue or instant glue, is a suitable option. It creates a strong bond with the vinyl material. Alternatively, you could also use a vinyl adhesive specifically designed for PVC and similar plastics. When using any adhesive, ensure the surfaces are clean and dry for optimal bonding.
Pre-drill oversized holes through the lattice (the largest hole that the screw head will allow without fitting through). Center each screw in the oversized holes and do not overtighten to allow for expansion and contraction of the lattice. Hang the lattice with a screw every 24". Attach sides and bottom loosely.
We recommend using a 6½"or 7¼" (140 tooth) circular saw blade “for plywood/plastics/laminates” to cut lattice. Place a 2x4 or 2x6 piece of lumber on your cutting surface. Rest the lattice sheet on top of the lumber, position- ing it with the marked line facing upward right next to the wood. Set the depth of the circular saw blade roughly 1/2" deeper than the thickness of the lattice. Let the blade come to full speed and cut slowly. Use 120-grit sandpaper to clean off any residual plastic on the cut edge.
Viewing 1-8 of 327
4.4 out of 5