The BigTop Multi-Flue Chimney Cover by HY-C Company is a smart, attractive choice for multi-flue chimneys. The black galvanized steel BigTop features a 24-Gauge removable galvanized steel hood with scalloped corners and roll-formed edges for extra strength and easy cleaning. The attractive black powder coat finish helps it to stand up to the elements. The 18-gauge 3/4 in. galvanized steel expanded mesh is available in 8 in., 10 in. and 14 in. heights. The 24-Gauge galvanized steel base flanges are designed to mount on a flat chimney top and measure about 1-1/4 in. on each side. The top-mount design attaches easily and securely with included tapmark masonry screws and tube of all-weather construction adhesive. Backed by HY-C's 7-Year Limited Warranty.
Measures 14 in. x 34 in. from screen to screen with 8 in. mesh height
Requires a 17 in. x 37 in. masonry chimney top for 24-Gauge galvanized steel base flanges to mount properly
Hood measures 22-1/4 in. x 46-1/2 in.
Tapmark masonry screws and tube of all-weather construction adhesive included
24-Gauge removable hood for extra strength and easy cleaning
Chimney caps act as a spark arrestor to prevent most ascending sparks from reaching the outside
Not recommended for use in situations where oil or coal is burned or when wood/pellets are used as primary source of heat
Q:What is the recommended height for the correct draw?
by|Nov 27, 2022
1 Answer
Answer This Question
A:Â Karl, The height of the cover is determined by the height of the tallest flue tile above the crown of the chimney. If the distance from the hood to the flue is too small it will decrease the draw of the flue. If the flue tile is 5" or less use the 8". If the flue is 5" - 8" use the 10", 8" - 11" use the14" braces. Feel free to call customer service for additional help at 1-800-325-7076.
by|Mar 7, 2023
1 found this answer helpful
Q:Can the mounting flanges be modified to mount to a sloped chimney grout bed?
by|Nov 13, 2022
1 Answer
Answer This Question
A:Â The mounting flanges are malleable and easily formed to fit the slope. Call Customer Service at 1-800-325-7076 if you have any more questions. Thank you,
by|Nov 14, 2022
Q:Why is use with coal fired flues not recommended?
by|Oct 12, 2022
1 Answer
Answer This Question
A:Â There is a chemical reaction created when the galvanized steel is exposed to the chemicals in coal flue gases that can quickly deteriorate the cover. Stainless steel does not react to coal flue gases. If you choose to use it anyway just know that it may have to be replaced soon. Thank you!
by|Oct 12, 2022
Q:Do you have a chimney cap 53 x 17 that is 10 inches high at least
by|Aug 29, 2022
1 Answer
Answer This Question
A:Â Yes we do order BBT1753 -10 it is 10" height.
Call 1-800-325-7076 for additional help. Thank you for asking!
by|Oct 30, 2022
Showing 1-4 of 37
Customer Reviews
4.5 out of 5
(128)
4.5
out of 128 reviews
91% recommend this product
5
77
4
36
3
9
2
2
1
4
Filter by:
Showing 1-10 of 128 reviews
Jul 6, 2022
Wam bam
Went together quickly with no tools needed
by
Verified Purchase
Jun 24, 2020
Excellent product, Price was perfect. Faced the exterior of chimney with flat stones that were al...
Excellent product,
Price was perfect.
Faced the exterior of chimney with flat stones that were also purchased at HD
by
Verified Purchase
Recommended
Sep 10, 2019
Easy to assemble,strong,and durables, I was really happy with this product.
Easy to assemble,strong,and durables, I was really happy with this product.
by
Verified Purchase
Recommended
Jun 10, 2019
Easy to put together, good looking finish, seems solid.
Easy to put together, good looking finish, seems solid.
by
Verified Purchase
Recommended
Sep 11, 2018
Nice cap, good finish. It came with screws and construction adhesive that I wasn't expecting.
Nice cap, good finish. It came with screws and construction adhesive that I wasn't expecting.
by
Verified Purchase
Recommended
Jan 24, 2017
Product assembled easily. It has only been up a couple of weeks so I cannot refelct upon how it h...
Product assembled easily. It has only been up a couple of weeks so I cannot refelct upon how it holds up in a wind storm or the like. We purchased it to keep spring birds from nesting in the chimney...it should work well for this. Looks better than screening with brick.
by
Verified Purchase
Recommended
Sep 13, 2023
Fit wasn't perfect but we made it work! Great product for a good price.
by
Verified Purchase
Sep 13, 2023
This worked nicely for me.
Installation of the product was easy but will vary based on how difficult it is to get to your chimney top. I felt the price point was a little high for the build quality but hope it will last for a long time without rusting.
Fairly lightweight, so the included 4 concrete anchors should be enough to hold in place. Also only comes with 4 nuts to attach top to cap walls, but there are 6 pegs that come through top - would have been nice to see 6 nuts.
by
Verified Purchase
Aug 16, 2023
Easy to assemble and install. Would purchase again
35 in. x 17 in. x 8 in. H Chimney Cap in Black Galvanized Steel
The BigTop Multi-Flue Chimney Cover by HY-CThe BigTop Multi-Flue Chimney Cover by HY-C Company is a smart, attractive choice for multi-flue chimneys. The black galvanized steel BigTop features a 24-Gauge removable galvanized steel hood with scalloped corners and roll-formed edges for extra strength and easy cleaning. The attractive black powder coat finish helps it to stand up to the elements. The 18-gauge 3/4 in. galvanized steel expanded mesh is available in 8 in., 10 in. and 14 in. heights. The 24-Gauge galvanized steel base flanges are designed to mount on a flat chimney top and measure about 1-1/4 in. on each side. The top-mount design attaches easily and securely with included tapmark masonry screws and tube of all-weather construction adhesive. Backed by HY-C's 7-Year Limited Warranty.View Full Product Description
30 in. x 14 in. x 8 in. H Chimney Cap in Black Galvanized Steel
The BigTop Multi-Flue Chimney Cover by HY-CThe BigTop Multi-Flue Chimney Cover by HY-C Company is a smart, attractive choice for multi-flue chimneys. The black galvanized steel BigTop features a 24-Gauge removable galvanized steel hood with scalloped corners and roll-formed edges for extra strength and easy cleaning. The attractive black powder coat finish helps it to stand up to the elements. The 18-gauge 3/4 in. galvanized steel expanded mesh is available in 8 in., 10 in. and 14 in. heights. The 24-Gauge galvanized steel base flanges are designed to mount on a flat chimney top and measure about 1-1/4 in. on each side. The top-mount design attaches easily and securely with included tapmark masonry screws and tube of all-weather construction adhesive. Backed by HY-C's 7-Year Limited Warranty.View Full Product Description
41 in. x 17 in. x 8 in. H Chimney Cap in Black Galvanized Steel
The BigTop Multi-Flue Chimney Cover by HY-CThe BigTop Multi-Flue Chimney Cover by HY-C Company is a smart, attractive choice for multi-flue chimneys. The black galvanized steel BigTop features a 24-Gauge removable galvanized steel hood with scalloped corners and roll-formed edges for extra strength and easy cleaning. The attractive black powder coat finish helps it to stand up to the elements. The 18-gauge 3/4 in. galvanized steel expanded mesh is available in 8 in., 10 in. and 14 in. heights. The 24-Gauge galvanized steel base flanges are designed to mount on a flat chimney top and measure about 1-1/4 in. on each side. The top-mount design attaches easily and securely with included tapmark masonry screws and tube of all-weather construction adhesive. Backed by HY-C's 7-Year Limited Warranty.View Full Product Description
34 in. x 14 in. x 8 in. H Chimney Cap in Stainless Steel
The BigTop Multi-Flue Chimney Cover by HY-CThe BigTop Multi-Flue Chimney Cover by HY-C Company is a smart, attractive choice for multi-flue chimneys. The stainless steel BigTop features a 24-Gauge removable 100% 304 stainless steel hood with scalloped corners and roll-formed edges for extra strength and easy cleaning. The 18-Gauge 3/4 in. 100% 304 stainless steel expanded mesh is available in 8 in., 10 in. and 14 in. heights. The 24-Gauge 100% 304 stainless steel base flanges are designed to mount on a flat chimney top and measure about 1-1/4 in. on each side. The top-mount design attaches easily and securely with included tapmark masonry screws and tube of all-weather construction adhesive. Backed by HY-C's Lifetime Limited Warranty.View Full Product Description