Thank you for your inquiry. The HS1910 is an SDS-Max hammer steel scaling chisel. This is too larget to work with SDS-plus hammers. We offer the HS1485 1-1/2" x 5-3/4" stubby scaling chisel with SDS-Plus shank. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
No it will not it only fit a sds max hammer
Yes it is
The HS1910 is an SDS-Max which is too large to fit into the RH328VC. The RH328VC accepts SDS-Plus shank bits. We do offer the HS1427 SDS Plus chisel: http://www.homedepot.com/p/Bosch-2-1-2-in-x-10-in-Wide-Chisel-Self-Sharpening-HS1427/203621950?keyword=bosch+hs1427
20-40 degree depending on space
Thank you for your question. The HS1910 Chisel has an SDS-max shank. If your Ryobi accepts SDS-max, then it will fit. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from M-F 7a-7p CST.
Thank you for your question. The HS1910 will work with hammers that accept SDS-Max accessories. If your hammer accepts SDS-Max accessories then this bit should work.
The 11220EVS Rotary Hammer accepts Spline/Round Hex Hammer Steel like our HS1817 Scaling Chisel. The SDS Max accessories will not work. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
The 11305 hammer accepts 3/4" hex bits so you would need to use the HS1503 3/4" hex scaling chisel. The HS1910 is an SDS-Max chisel so it will not work. For additional information please visit our website at www.boschtools.com or call 1-877-267-2499