I used Bosch GWS 13-50 VSP This add on works fantasic for removing grout on floor tile. The shop vac hose attachment controlled all the dust.
No it will not generically fit any 4-12-5 inch grinder. It will not fit either of my 4-1/2" grinders, a Dewalt DWE402 nor a Makita GA4530. The attachment hole in this guard's center is ~2" diameter, which was too large of an opening to fit either of those. Plus the opening has 4 evenly spaced prongs spaced 90 degrees apart. It does not have a clamp-able section to make it more generic.
It is specific for most Bosch 4-1/2 to 5 inch grinders. Not the SLIM model though. It is not designed as a generic grinder accessory.
Your grinder isn't listed in the instructions. The Bosch grinder models listed start with 18, 19 or 13. The center opening that attaches to the grinder is 2" in dia. There is a tab (not shown in the above picture) that attaches the dust collector to the handle. I modified it to work with a Craftsman angle grinder. I had to cut some fireplace brickwork in my family room. It did a great job of capturing the dust.
I would imagine yes. I have used it for tuck pointing and cutting tile. Its depth of cut is only about 1-1/2 inches though so I would not imagine it would be useful for cutting brick all the way through.
Hi there! For 7 In Angle Grinder, we do have 19DC-7 Dust Extraction Guard, which is for model 1974-8 or you can also use the 18SG-7 for concrete surfacing purpose. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Thank you for your question. The 18DC-5E 4-1/2 to 5 in. Dust Collection Cut Off Guard for Small Angle Grinders is designed for left or right handed. You just need to place it on the position you prefer. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Thank you for your question. Yes, the 18DC-5E will work on the GWS 4 1/2" and 5" Bosch grinders.
Thanks for the question. The 18DC-5E Dust Collection Attachment is compatible with 4-1/2 In. and 5 In. small angle grinders – like GWS10-45/P/PD, GWS13-50/VS/VSP/P/PD, AG series and 1800 series grinders; 18 V cordless grinders: GWS18 V-45C/PC/PSC. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Thank you for your question. The 18DC-5E Dust-Extraction Guard for Bosch 4-1/2 In. and 5 In. Small Angle Grinders will work only with 4-1/2 In. and 5 In. small angle grinders: GWS10-45/P/PD, GWS13-50/VS/VSP/P/PD, AG series and 1800 series grinders; 18V cordless grinders: GWS18V-45C/PC/PSC. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.