A: thank you for the question. The HC2127 Rotary Hammer Bit has a diameter of 3/4" only. What is the size of your EMT sleeve? For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
A: Yes, you can use this on any manufacturer's SDS plus rotary hammer drill.
A: This worked perfect on my Milwaukee rotary hammer drill. So it doesn’t have to be A Bosch Drill all it has to be is sds ready
A: Not for drilling. it helps to keep the dust down when cutting concrete but is of little help when drilling because the dust is a lot more contained to the area of the whole.
A: You can use a little water to eliminate dust. But just make sure you get the water in your drill. I used no water but a dust mask to avoid inhaling any concrete dust which is bad for your health.
A: not needed for drilling masonry
A: Thank you for your question. These bits are designed for dry drilling. Water is not needed for drilling into concrete.
A: 1/2 "
A: This is designed to fit the Bosch Rotohammer - as such it has it's own bit design and would not easily fit a standard drill - however, I suppose you could put it in a standard 1/2 inch chuck. Without the hammer effect, you would be drilling forever.
A: Thank you for your question. The HC2167 has an SDS-Plus shank and works only with SDS-Plus rotary hammers.
A: I don't know the truck size it is a quick connect
A: 3/8", but recommend a 1/2" drill for power.