Ask about this product
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Product Details
Specifications
Questions & Answers
What is the difference between FIP and compression fitting?
On a faucet supply line the 1/2" FIP is an iron pipe thread that is usually on a faucet, the 3/8" OD compression is a special thread used on compression fittings. This connector uses a rubber washer instead of the compression nut and compression ring. If you need a better explanation please contact technical support at 877-272-7755. Thanks
Is this for both hot and cold
Yes, This faucet connector is rated to 160 degrees Fahrenheit.
Will this work for a gas line?
No! This faucet connector is only designed for use with water. Our gas connectors are a corrugated stainless steel tubing. If you need help selecting a gas line you can contact technical support at 877-272-7755. Thanks
What is the lining of the hose the water travels through?
The Inner Hose is made of reinforced PVC. Thanks
How do I know if this will fit my tub faucet and the shower arm connector
This connector is designed to be used on a 3/8" OD compression fitting like on a standard water stop and a 1/2" male iron pipe connection like on a sink or kitchen faucet. You would need to find out what connection types you have. You could also contact technical support at 877-272-7755 for assistance. Thanks
I need 1\2" flex hose for on demand water heater inlet with good psi. Pex tube popped a hole.
Hello, please reach out to customer service at support@hwcares.com so they can get additional information from you. Thank you
Why adjustable wrench rather than a standard wrench of correct size?
You can use a 15/16" open end wrench to tighten the 1/2" FIP nut and a 5/8" open end wrench to tighten the 3/8" OD compression nut but due to the low torque required and tighter spaces that these connectors can be located in an adjustable wrench is usually easier to work with. It is a personal preference, and you can tighten the nuts any way you feel more comfortable. Thanks
can this be use for the kitchen Faucet ?
Yes, this is a faucet connector that will work on most kitchen and bathroom faucets. You will need to verify your water stop has a 3/8" OD compression outlet, which is the most common outlet. If you need more help selecting a connector you can contact technical support at 877-272-7755 Thanks
Viewing 1-8 of 112
Customer Reviews
4.7 out of 5
Loading Recommendations
Compare Key Features
Product Snapshot | |||
|---|---|---|---|
Ideal for homeowners looking for a reliable and flexible water supply line, making installation easier. This braided polymer supply line offers superior corrosion resistance and durability for long-lasting performance. | Ideal for homeowners looking for a flexible and durable water supply line, making installation easier. This braided polymer line resists corrosion and kinking, ensuring reliable performance. | Ideal for connecting new dishwashers, this supply line offers superior kink-free flexibility and robust corrosion resistance for lasting performance. | Ideal for customers who want a reliable and flexible water supply line, ensuring long-lasting performance with its corrosion-resistant design. |
Length | |||
30 in. | 60 in. | 60 in. | 60 in. |
Inner Diameter | |||
0.550 in. | 0.550 in. | 0.550 in | 0.550 in. |
Material Type | |||
Braided Polymer | Braided Polymer | Braided Polymer | Braided Polymer |
Flexibility | |||
Bends freely, without kinking or crimping | Bends freely, without kinking or crimping | Bends freely, without kinking or crimping | Bends freely, without kinking or crimping |
Burst Pressure Rating | |||
125 psi | 125 psi | 125 psi | 125 psi |
Related Products
3/8 in. Compression x 1/2 in. FIP x 30 in. Braided Polymer Faucet Supply Line
BrassCraft Speedi Plumb Plus 3/8 in. compression inlet x 1/2 in. female iron pipe outlet x 30 in. of length flexible braided polymer water connector is corrosion resistant inside and out. Used to connect the water supply to your faucet, this connector features a high tenacity, multi-filament yarn, protected by a special polymer coating for optimum corrosion resistance and durability. On the inside, our tough PVC tubing resists attack by chlorine, chloramines and other corrosive elements. The braided polymer fibers are designed to bend freely without kinking or crimping. Use to hookup cold or hot water supply.
3/8 in. Compression x 1/2 in. FIP x 24 in. Braided Polymer Faucet Supply Line
BrassCraft Speedi Plumb PLUS 3/8 in. Compression inlet x 1/2 in. Female Iron Pipe outlet x 24 in. length flexible braided polymer water connector is corrosion resistant inside and out. Used to connect the water supply to your faucet, this connector features a high tenacity, multi-filament yarn, protected by a special polymer coating for optimum corrosion resistance and durability. On the inside, our tough PVC tubing resists attack by chlorine, chloramines and other corrosive elements. The braided polymer fibers are designed to bend freely without kinking or crimping. Use to hookup cold or hot water supply.
1/2 in. FIP x 1/2 in. FIP x 30 in. Braided Polymer Faucet Supply Line
BrassCraft Speedi Plumb plus 1/2 in. Female Iron Pipe inlet x 1/2 in. Female Iron Pipe outlet x 30 in. L braided polymer water connector is corrosion resistant inside and out. Used to connect the water supply to your faucet, this connector features a high tenacity, multi-filament yarn, protected by a special polymer coating for optimum corrosion resistance and durability. On the inside, our tough PVC tubing resists attack by chlorine, chloramines and other corrosive elements. The braided polymer fibers are designed to bend freely without kinking or crimping. Use to hookup cold or hot water supply.
1/2 in. FIP x 1/2 in. FIP x 36 in. Braided Polymer Faucet Supply Line
BrassCraft Speedi Plumb PLUS 1/2 in. Female Iron Pipe inlet x 1/2 in. Female Iron Pipe outlet x 36 in. length flexible braided polymer water connector is corrosion resistant inside and out. Used to connect the water supply to your faucet, this connector features a high tenacity, multi-filament yarn, protected by a special polymer coating for optimum corrosion resistance and durability. On the inside, our tough PVC tubing resists attack by chlorine, chloramines and other corrosive elements. The braided polymer fibers are designed to bend freely without kinking or crimping. Use to hookup cold or hot water supply.
