Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. FIP x 60 in. Stainless Steel Gas Connector 3/8 in. O.D. (24,900 BTU)
- Gas connector used for natural and LP gases
- Easy install with smoother, burnished connector ends
- ProCoat yellow coating resists harsh chemicals and conditions
- View More Details
Product Details
About This Product
BrassCraft's Safety+PLUS gas connector combines patented excess flow technology with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS Excess Flow Valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. BrassCraft's stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide the most complete corrosion resistance.
Highlights
- 1/4 in. I.D. (3/8 in. O.D.) corrugated stainless steel
- Safety+PLUS EFV helps protect against gas fires and explosions
- Safety+PLUS EFV installs like a standard gas fitting; no special tools required
- Use to install dryers, decorative stoves and gas log fireplaces
- ProCoat coating corrosion resistant to harsh chemicals as well as UV rays and salt
- CSA certified to ANSI Z21.24/CSA 6.10 and ANSI Z21.75/CSA 6.27
- Approved for indoor and outdoor use
- 1/2 in. MIP (3/8 in. FIP tap) connection to gas supply or gas ball valve
- Safety+PLUS EFV has no parts that can wear, break or misalign over time for 24/7 protection
- Safety+PLUS EFV is omnidirectional and can be installed in any position - vertical or horizontal
- Use with natural and LP (propane) gases
- Safety+PLUS EFV is 100% factory performance tested
- Gas connector is 100% leak tested
- Temperature rating: -20°F to 150°F
- Pressure rating: 1/2 psi maximum
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Specifications
Dimensions: H 1.250 in, W 1.250 in, D 61.160 in
Dimensions
Inner diameter (in.) | 0.25 | Outer diameter (in.) | 0.375 |
|---|---|---|---|
Product Depth (in.) | 61.160 in | Product Height (in.) | 1.250 in |
Product Length (in.) | 61.160 in | Product Width (in.) | 1.250 in |
Details
Connection type | FIP x MIP | Gas Vent Pipe and Fittings Accessory Type | Gas Appliance Connector |
|---|---|---|---|
Inner material | Stainless steel | Maximum Pressure (PSI) | 0.50 |
Maximum Working Temperature (F) | 150 | Minimum working temperature (F) | -20 |
Outer Material | PVC | Product Weight (lb.) | 0.8066 lb |
Returnable | 90-Day |
Warranty / Certifications
Certifications and Listings | CSA Certified | Manufacturer Warranty | Limited Manufacturer's Warranty |
|---|
Questions & Answers
Typical questions asked about products:
- Is the product durable?
- Is the product easy to use?
- What are the dimensions of the product?
Customer Reviews
5 out of 5
Compare Similar Items
Related Searches
Related Products
Safety+PLUS 3/4 in. MIP Excess Flow Valve x 3/4 in. FIP x 60 in. Stainless Steel Gas Connector 5/8 in. O.D. (93,200 BTU)
BrassCraft's Safety+PLUS gas connector combines patented excess flow technology with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. BrassCraft's stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide the most complete corrosion resistance.
Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. FIP x 72 in. Stainless Steel Gas Connector 1/2 in. O.D. (49,100 BTU)
BrassCraft's Safety+PLUS gas connector combines patented excess flow technology with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS Excess Flow Valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. BrassCraft's stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide the most complete corrosion resistance.
Safety+PLUS 1/2 in. Female Flare Excess Flow Valve x 1/2 in. MIP x 72 in. Gas Connector 1/2 in. O.D. (49,100 BTU)
BrassCraft's Safety+PLUS gas connector combines patented excess flow technology with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS Excess Flow Valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. BrassCraft's stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide the most complete corrosion resistance.
Safety+PLUS 3/4 in. MIP Excess Flow Valve x 3/4 in. FIP x 72 in. Stainless Steel Gas Connector 5/8 in. O.D. (86,000 BTU)
BrassCraft's Safety+PLUS gas connector combines patented excess flow technology with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. BrassCraft's stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide the most complete corrosion resistance.
