|Name||Com-Pak Bath 1,300-Watt 240-Volt In-Wall Fan-Forced Heater with Timer in White||3,000-Watt Large Room Wall Heater||16-13/32 in. x 20-19/64 in. 3,000-Watt High-Capacity Wall Heater in White||Com-Pak Twin 3000-Watt 240-Volt 10236-BTU Fan Forced In- Wall Electric Heater in White|
|Room Size (sq. ft.)||150-250||500-1000||500-1000||500-1000|
|Wattage (watts)||1300||3000.000||3000||3000 W|
|Heating Technology Type||Forced Air||Forced Air||Forced Air||Forced Air|
|Area Heated (Sq. Ft.)||150 ft²||450||300 ft²||350 ft²|
|View Product||View Product||View Product||View Product|
You can purchase replacement parts directly from NuTone. Please contact our Customer Service Department at 1-888-336-3948 between 7:30 AM and 6:00 PM (CDT) Monday-Friday to place an order. Authorized method of payment is via MasterCard/Visa or a check/money order in advance. Shipping and handling will vary depending upon your order total (within the Contiguous United States). Your local sales tax may also apply. You can order your replacement parts on-line at www.NuTone.com.
This unit will roughly heat a 300 square foot room. This unit is made to be a supplemental heat source. This is not considered a primary heating source. Thank you.
Somewhat quiet during operation. But on automatic mode gives a burst of hot air then calms down. At first it will make you jump.
Might be a tight fit. My studs were off by 1/4 on 16 on center
Just turn existing thermostat all the way up and place your line voltage or power relay ( if you want to use a low voltage programmable type stat it would require a transformer and power relay) on the power wiring supply to unit.
No will not work
Everything comes in a complete kit with can housing
Just a turn knob from high to low on full low it’s off.
The 194 heater is 3000W and has a housing dimension of 14.25 x 20, which is larger than what you specify. You would need to make the cut out larger to accommodate this heater. The 192 heater is 2000W but it also has a housing dimension of 14.25 x 20, which results in needing a larger cut out. For additional assistance, please contact our Technical Support Department at 800-637-1453.