Return this item within 90 days of purchase.
The Broan Flex Series A110L White 110 CFM Exhaust Bath Fan with Light offers easy, room side installation with no attic access required. This ceiling-mounted ventilation fan features foldable mounting ears and an EzDuct connector for easy installation. The design complements any decor.
Dimensions: H 8.5 in, W 11.5 in, L 12.125 in
Housing Length (in.) | 9.25 | Housing Width (in.) | 10 |
---|---|---|---|
Product Height (in.) | 8.5 in | Product Length (in.) | 12.125 in |
Product Width (in.) | 11.5 in |
Air Volume (CFM) | 110 | Amperage (amps) | 1.2 |
---|---|---|---|
Color/Finish | White | Duct Compatible Sizes | 4 in |
Features | Light, Roomside Installation | Grill Shape | Rectangle |
Housing Material | Galvanized Steel | Included | No Additional Items Included |
Installation Type | Ceiling | Light Bulb Base Code | E26 |
Light Bulb Type Allowed | Incandescent | Light Bulb Type Included | No Bulbs Included |
Maximum Light Bulb Wattage (watts) | 100 | Maximum Room Size (sq. ft.) | 105 |
Mount Type | Recessed | Number of Bulbs Required | 1 |
Pack Size | 1 | Product Weight (lb.) | 9.6 lb |
Returnable | 90-Day | Room Size | Large Room Fan |
Voltage (V) | 120 | Wattage (watts) | 23.4 |
Certifications and Listings | HVI Certified, UL Listed | Manufacturer Warranty | Limited 3 year |
---|
Thank you for your question regarding the A110L ventilation fan and light unit. This model can use a 100-watt maximum incandescent A19 type bulb or energy-efficient LED with a maximum overall length of 4.4" or less. There will be no safety issues when using an LED.
Hi Andres, Thank you for your question on the A110L model. This model uses a housing size of 9-1/4" x 10" and has a 4" round duct size. The QTREN080FLT used a housing size of 10-1/2" x 11-3/8" with a 4" duct size. You may have to patch the ceiling since the A110L is smaller. We would recommend checking out the RB80L1 fan and light as a replacement. It will use the 10-1/2" x 11-3/8" housing size with a 4" duct.
Hi Orse, Thank you for your question on model A110L. This Grille is installed with Grille springs. If you need more assistance, please contact Product Support Team at 800-637-1453.
Hi Scott1234, Thank you for your question on the A110L ventilation fan and light. The incandescent light can be dimmed. We do not offer a dimmer switch for this unit, but one can be found locally. Please contact Technical Support with further questions at 888-336-6151.
Hi Kapmins, Thank you for your question on model A110L. This unit can be mounted on a 7/12 pitch.
15 amp should be sufficient.
15 amp is sufficient
Dear Lumpy, I installed this Broan about 3 years ago and it works great. It doesn't draw more than couple of apps between the exhaust fan and light bulb. You can use a 15 amp breaker for wire size 14 or 12 awg (american wire gauge) You can also use a 20 amp breaker only if the size of your wire is 12 awg. Just keep in mind, if the wire is 14 awg, you must use a 15 amp breaker. Good luck with the installation. From Sparky (a retired Local Union #3 Electrician, NYC, IBEW)
It can be on a 15amp circuit the amperage and wattage is very low for that circuit.
If it is a minor hum, it could be the switch. If the hum is noticeable, you might want to check your connections. I have installed many fans similar to this one with dimmer switches and have never noticed a hum. One caveat: make sure to wire the light and fan separately. The fan should never be on a dimmer switch. This also means potentially running another wire (or two, if a new neutral is needed) in order to separate the light from the fan.
The switch that you reference is for use with an LED fan, like the AERN110L. However, the model number you reference in your question is the A110L. Please confirm the model number of your fans and then contact our Technical Support Department at 888-336-6151 for assistance.
Substitution of a Compact Florescent lamp or LED for an incandescent bulb can be done, but some critical guidelines must be followed. 1. The bulb must be listed by a certification body (UL, CSA, ETL). 2. Bulb must be marked suitable for enclosed fixtures. 3. Bulb should be the same shape of A19 (2.38" diameter x 3.8"). 4. Bulb must be equivalent lumens or less. Even by following the guidelines, the bulb may have a shorter than expected life or a reduced performance. Thank you.
Yes, I have one installed in mine currently.
No, this bathroom unit is not compatible with LED bulbs.
Yes. That is what I did from the start.
Viewing 1-8 of 15
4.3 out of 5
Get an immediate answer with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.