![]() | ![]() | ![]() | ![]() | |
Brand | Buffalo Tools | Vestil | Jet | Vestil |
Name | 440 lb. Electric Cable Hoist with Wired Control Switch | 1,000 lbs. Capacity 20 ft. Professional Chain Hoist | JLP-075A 3/4-Ton Lever Hoist with 20 ft. Lift | 1,500 lbs. Capacity 20 ft. Lift Professional Lever Hoist |
Price | $17900 | $19600 | $27799 | $34560 |
Ratings | (11) | (0) | (2) | (0) |
Ideally Used For | General,Heavy-Duty,Hydraulic Cranes,Lifted Truck,Off-road,RV,Racing,SUV,Shop Cranes,Truck | |||
Weight Capacity (lb.) | 440 | 1000 | 1500 lb | 1500 |
Voltage (volts) | 110 | |||
Maximum Lift Height (in.) | 456 | 240 | 240 | 240 |
Features | Adjustable Limit Switches,Overload Limiting Clutch,Swivel Load Hook | Swivel Load Hook | Swivel Load Hook | Swivel Load Hook |
Included | Mounting Hardware | No Additional Items Included | Chain | No Additional Items Included |
Product Height (in.) | 8.5 | 11.25 | 12.79 in | 5 |
Material | Metal | Steel | Steel | Steel |
Chain pull to lift rated load (lb.) | 1000 | 31 | 1500 | |
View Product | View Product | View Product | View Product |
![]() | ![]() | ![]() | ![]() | |
Brand | Buffalo Tools | Vestil | Jet | Vestil |
Name | 440 lb. Electric Cable Hoist with Wired Control Switch | 1,000 lbs. Capacity 20 ft. Professional Chain Hoist | JLP-075A 3/4-Ton Lever Hoist with 20 ft. Lift | 1,500 lbs. Capacity 20 ft. Lift Professional Lever Hoist |
Price | $17900 | $19600 | $27799 | $34560 |
Ratings | (11) | (0) | (2) | (0) |
Ideally Used For | ||||
Weight Capacity (lb.) | ||||
Voltage (volts) | ||||
Maximum Lift Height (in.) | ||||
Features | ||||
Included | ||||
Product Height (in.) | ||||
Material | ||||
Chain pull to lift rated load (lb.) | ||||
View Product | View Product | View Product | View Product |
No must stay dry due to the cable and mechanics
The single cable is 38' and the double cable is 19'.
Please contact our customer service at 800-568-6657 or email info@buffalotools.com.
#1. The inside dimension of the bracket measured looks like 1-3/4". Therefore, it seems that the bar/tubing, pipe should be 1-3/4" outside dimension. You have to fit it to see what works. Make sure the sliding bar meets or exceeds the lifting rating of the hoist. Use the heaviest wall thickness that still gives you 1-3/4" outside dimension square.... #2. However, if you use the hoist in a garage or open rafter building it seems that the bar (or tubing) which slides through the two mounting brackets should be long enough to span across normal rafter beams...that is 2 feet feet 16" OC and 5 feet for 48" OC. The support bar, tubing or hardened steel pipe should be drilled for kotter pin or keeper pin on each side of the hoist body as well as outboard of the supporting rafter to keep the load/hoist from moving laterally when lifting
No, you can not extended it.
Here is what the manual says about using an extension cord: Always use the appropriate extension cord, making sure it is rated for use with power tools. Always be sure the extension cords are in good condition, free of cuts or nicks in the insulation. If using the power tool in an outside area with an extension cord, make sure the cord is rated for outdoor use. I hope that helps. Thank you.
Unfortunately, the hoist is only designed to go up and down and not out of the side. Thank you.
Please contact customer service at 800-568-6657 for further information.
We do not have the decibel rating on the EHOISTUL. The decibel rating is only received when it has to do with a gas or propane powered engine. If you would like any other information on this item, please call our customer service department at 800-568-6657.
Howdy Sandman, This hoist would not be able to lift much weight if mounted to wall. happy hoisting, Coach Dave