#1 Home Improvement Retailer

Internet # 100669601

Model # 120032222123

Store SO SKU #720031

22 in. x 22 in. Round White Plastic Built-in Screen Gable Louver Vent

Apply Now
Pay $49.47 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Color-molded plastic build resists scratching, flaking, or fading
  • Sealed-in fiberglass screen protects against insects and animals
  • Backed by a limited lifetime warranty
  • View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

Gable vents provide added architectural detail with their wood grain finish and sharp distinctive characteristics. They offer key features that have become the benchmark in the industry. Installation is easy with our wide nailing flange, leveling lines, and adjustable stop gauge. Our patented snap-on trim ring hides rough cuts and reduces installation time, while providing a finished appearance once the vent has been installed. Our vents utilize a double baffle design that blocks a direct view into the home and provides added protection against wind-driven rain and snow. The sealed-in fiberglass screen offers complete insect and animal protection. Each gable vent has more venting area than industry standards. Available in 24 colors or a separate paintable option (color code 030). Limited lifetime warranty. Polypropylene/polystyrene.


  • Net free venting area: 50 sq. in. rough opening: 7 in. x 8 in.
  • Durable, maintenance-free U.V. stabilized, deep wood grain texture, constructed with color molded-through so they won't scratch, flake, or fade
  • Easy to install on all types of exteriors: wood, vinyl, stucco, brick, or fiber cement, keystone add-ons are also available and are sold separately
  • Limited lifetime warranty
  • Standard Color offering: 001, 002, 008, 013, 016, 020, 021, 023, 030, 034, 048, 059, 069, 095, 097, 117, 123, 347, 362, 413, 913. All other colors a 20-piece minimum must be ordered.
  • Sealed-in fiberglass screen allows air to flow while keeping insects and animals out
  • Can be installed in wood, vinyl, stucco, brick, or fiber cement
  • Snap-on trim ring, wide nailing flange, leveling lines, and adjustable stop gauge for easy installation
  • AK, HI ship to store only
  • Return Policy

Product Information

Internet # 100669601

Model # 120032222123

Store SO SKU #720031


Dimensions: H 22 in, W 22 in, D 2 in


Cut-Out Width (in.)

8 in

Net-Free Area (Sq. In.)


Product Depth (in.)

2 in

Product Height (in.)

22 in

Product Width (in.)

22 in


Color Family





Built-in Screen, Paintable, UV Resistant, Weather Resistant





Mounting Position

Gable Mount



Power Type


Product Weight (lb.)

3.3 lb



Screen Included




UV Resistant


Warranty / Certifications

Manufacturer Warranty

Limited Lifetime Warranty

Questions & Answers

Q:My openning on my stucco house measures 22". Is that the size I buy? I live across from the ocean. Will it mildew within the year?
by|Oct 2, 2018
0 Answer
Answer This Question
Q:Is the screen on this vent on the gable cover or on the portion covering the hole in the wall? We have had bats nesting between the vent cover and the screen over the hole and in the wall. The bats would roost a n he has snide of the cover.
by|Sep 22, 2017
1 Answer
Answer This Question

A:  The screen coves the vent area.

by|May 4, 2023
    Q:Are these vents square or rectangular in the back to make vinyl siding around easier? Another brand says theirs are.
    by|Aug 3, 2016
    1 Answer
    Answer This Question

    A:  Thank you for your interest in Builders Edge. These are not square in the back they are on a nailing flange all the way around.

    by|May 3, 2023
      Q:I measured my gable vent from the outside; and I thought it was 24 inches. But I couldn't find a 24" round gable vent. How do I measure it? Should it be measured from the inside the attic or outside? Also, is there a video on how to install it? Do I have to climb into my attic to install it?
      by|Aug 15, 2012
      2 Answers
      Answer This Question

      A:  Gable measurement is taken from the outer dimension, which includes the outer snap on ring. Measurements should be taken from outside the attic. Using internet search engines and requesting DIY instruction on gable installation should offer up multiple viewings, several of which should give you the instruction you are looking for. Most of the work will need to be done externally. If you are installing a gable where there was not one before, you may want to at least look into the attic area to ensure there are no obstructions where you may be potentially cutting through roof construction supports.

      by|May 2, 2023
      2 found this answer helpful

      A:  Our gable vents are designed to be installed from the outside over the hole and under the siding. You would measure from the outside.

      by|May 2, 2023
        Showing 1-4 of 4

        Customer Reviews

        4.3 out of 5

        • 4.3 out of 7 reviews
        • 86% recommend this product
        Filter by:
        Showing 1-7 of 7 reviews
        Did just what we needed to keep the animals out of the attic. Looks great on the house.
        Light weight and sturdy. Looks great and very easy to install from the inside of the house. No ladder was needed to climb up. Vent also had a screen in the rear to keep bees and wasps out of the attic.
        • Pro
        • Verified Purchase
        • Recommended
        The external ring falls short and doesn't cover the screws around the vent as in the 18" model. A design error? Probably ok for a farm, but definitely not for a house. (See image)
        Response from Builders Edge SupportMay 7, 2014
        We are sorry to inform you but you installed this vent incorrectly. We can see why you would not be please with how this looks. All of our gable vents are to be installed before your siding application on your home, not intended as a surface mount. Our customer support team is always available at 800-969-7245 to answer questions.BuildersEdge
          1 found this review helpful
          Product was exactly as advertised. I used as a retrofit on a stucco house, so I had to cut off t...
          Product was exactly as advertised. I used as a retrofit on a stucco house, so I had to cut off the nailing flange, fit it in the opening in the stucco, and use silicone to attach it. Installed easily and quickly.
          Response from Builders Edge SupportAug 31, 2017
          Thank you for your Builders Edge purchase and online review. BuildersEdge
          • Verified Purchase
          • Recommended
          Design Flaw? Nope.
          The previous reviewer wasn't aware that this vent is designed to be installed with siding and not surface mounted as shown in his picture. The gap is there to accommodate siding that is butted against the vents edge. I installed this and it provided for a beautifully finished vent on my gable end.
          • Pro
          • Recommended
          Excellent Gable Vent - Made In USA!!
          Excellent quality construction with light woodgrain impressions. Instructions on box are clear and easy to understand. Straight forward installation. And it's always a bonus to see "MADE IN THE U.S.A."
          • DIY
          • Verified Purchase
          • Recommended
          These gable vents are a really good value.
          I was very pleased with the quality of these gable vents. They are heavy gauge PVC with a wood grain finish. I was also pleased that they have a screen to prevent bees, etc. from entering through the vents, yet let air circulate. Best of all, they are maintenance free. I will not have to replace them again.
          • Verified Purchase
          • Recommended
          Good product, easy to install and cooled attic well
          I installed three of these gable vents in my attic to reduce the heat in the summer months. It is a tight fit to install when siding is already installed but not imposssible. The lock ring does not hold very well if installed after siding is up but I didn't think the ring would stay on anyway with the winds we get around here so I put four 3 inch screws through the ring to make sure it holds. The cooling was immediate and noticable. Everything has held up well so far through a Wyoming winter.
            • Recommended
            Showing 1-7 of 7 reviews