- Enables a 90 degree change of directions in a run of conduit
- Belled end allows for easy joining of conduit
- Compatible with Sch. 40 rigid non-metallic conduit
- See More Details
Frequently Bought Together
Price:
80¢
Product Overview
The 1/2 in. 90° Belled Standard-Radius Elbow is crafted with Schedule 40 PVC for durability. The elbow is designed for above and below-ground applications as described in the NEC. It is also sunlight resistant for use in exposed and outdoor areas.
- Designed for above and below ground applications
- Sch. 40 PVC construction
- For use with 90°C conductors
- Resists rust and corrosion
- Listed for exposed and outdoor usage
- ETL and UL listed for safety
- Belled end
- Note: product may vary by store
Product Overview
- Enables a 90 degree change of directions in a run of conduit
- Belled end allows for easy joining of conduit
- Compatible with Sch. 40 rigid non-metallic conduit
Compare Similar Conduit Fittings
 | | |  | |
| Brand | Carlon | Carlon | Halex | Carlon |
| Name | 1/2 in. 45-Degree Schedule 40 PVC Belled End Standard Radius Elbow | 1/2 in. 90-Degree Schedule 40 PVC Belled End Standard Radius Elbow | 1/2 in. Rigid Conduit Locknuts (4-Pack) | 3/4 in. x 1/2 in. PVC Reducer Bushing |
| Price | 60¢ | 80¢ | 84¢ | 90¢ |
| Ratings | (22) | (56) | (37) | (8) |
| Application type | Non-metallic | Non-metallic | Rigid | Non-metallic |
| Fitting type | Elbow | Elbow | Locknut | Bushing |
| Trade Size (in.) | 1/2 | 1/2 | 1/2 | 1/2 x 3/4 |
| Material | PVC | PVC | Galvanized Steel | PVC |
| Electrical Product Type | Elbow | Elbow | Standard Fitting | Reducer |
| View Product | View Product | View Product | View Product |
Compare Similar Conduit Fittings
| | | | |
| Brand | Carlon | Carlon | Halex | Carlon |
| Name | 1/2 in. 45-Degree Schedule 40 PVC Belled End Standard Radius Elbow | 1/2 in. 90-Degree Schedule 40 PVC Belled End Standard Radius Elbow | 1/2 in. Rigid Conduit Locknuts (4-Pack) | 3/4 in. x 1/2 in. PVC Reducer Bushing |
| Price | 60¢ | 80¢ | 84¢ | 90¢ |
| Ratings | (22) | (56) | (37) | (8) |
| Application type | ||||
| Fitting type | ||||
| Trade Size (in.) | ||||
| Material | ||||
| Electrical Product Type | ||||
| View Product | View Product | View Product | View Product |
Specifications
Dimensions
Product Depth (in.)
0.844
Product Height (in.)
8.3
Product Width (in.)
8.3
Trade Size (in.)
1/2
Details
Application type
Non-metallic
Belled end
Yes
Bend (Degrees)
90
Bend Radius
0.0 in
Compatible conduit type
RNC
Electrical Product Type
Elbow
Fitting type
Elbow
Material
PVC
Package Quantity
1
Paintable/Stainable
No
Product Weight (lb.)
0.14
Returnable
180-Day
Warranty / Certifications
Certifications and Listings
UL Listed
Manufacturer Warranty
Yes
Questions & Answers
9Questions17Answers
Are they in stock?
Asked by Bill January 19, 20211
AnswerPlease check with your local store.
can this product be used in a residential water line, at approx 60-70 psi? I noticed that this IS...
Asked by doug October 23, 20201
AnswerThese fittings have not been tested for use with pressure.
I need 1/2 in. 90-degree scheduule 40 pvc belled end standard radious elbow electrical
Asked by Rich April 27, 20201
AnswerPlease reach out to Home Depot directly about this.
Can this be used for a 90 degree sweep for fiber optics?
Asked by Curt November 20, 20191
AnswerYes you can as long as you don’t exceed the capacity of.the diameter of your PVC. Check your local codes for maximum fill capacity. Suggest that you use schedule 80 PVC and consider marking the burial location with magnetic marking tape.
Can these sweep 90's be used in pressured water lines? I.e. 60 psi 1" size.
Asked by Gfho November 5, 20192
AnswersYou can buy 40/80 water pipe. The gray pvc pipe is primarily meant for electrical applications.
What is the RADIUS? The Specifications say "Bend Radius 0.0 in" which means it's a straight pipe...
Asked by BigSmiler August 24, 20191
AnswerThe radius is a standard radius of 9.5 in. We will get that updated too, thank you!
Are these sold by each. Not a case.
Asked by Budster November 24, 20184
AnswersHi Budster You can get these in the store one at a time or by the case. Check with your Home Depot professional at your local store. ret
"Standard radius" isn't particularly helpful. What IS the radius?
Asked by Thomas May 13, 20184
AnswersThis a 16" standard radius elbow.
does this 1/2 come in 45 degree belled standard radius elbow like the 3/4 does?
Asked by geezer May 23, 20152
Answersyes, Model # UA7ADB-CTN , and it is $0.61
Customer Reviews
Jan 8, 2020
I used this product in the wiring of my workshop, heavy duty and top quality. You use the roll wi...
I used this product in the wiring of my workshop, heavy duty and top quality. You use the roll wire in these conduit units to protect the wiring. The job goes by quickly with fittings and conduit. Some of these products i have had in my other room for 10 years or longer. Thanks for the great product. ret
by ret
Related Products
Explore More on homedepot.com
More Products
- Buy 15 mm x 12.5 mm Zinc-Plated Phillips Drive Cam Connector (4-Piece)-801744
- Buy HOMESTYLES Cottage Oak Buffet with Hutch 5100-0066-62
- Krud Kutter 32 oz. Original Concentrate Cleaner/Degreaser-KK326
- Veranda Traditional/Williamsburg White Line Bracket Kit (4-Pack)-73014296
- Klein Tools Non-Contact Voltage Tester-NCVT-1SEN
- Blue Padded Club Chair FC-332XL
- Rust-Oleum Transformations 1 qt. Java Brown Cabinet Decorative Glaze-266227
Top Brands
Product Collections