#1 Home Improvement Retailer

Internet # 317896630

Model # B4603T

Store SKU # 1006694656

3/4 HP Belt Drive LED Smart Garage Door Opener

$256.47
Apply Now
Pay $231.47 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Ultra-quiet belt drive operation is perfect for attached garages
  • Advanced integrated LED light delivers 1,000 lumens of brightness
  • Monitor and control your garage door with the myQ app
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
caret
Product Details
  • Ultra-quiet belt drive operation is perfect for attached garages
  • Advanced integrated LED light delivers 1,000 lumens of brightness
  • Monitor and control your garage door with the myQ app
About This Product

The garage is your home's workhorse. It's where you keep your tools, sports equipment, toys, and it's a place of refuge where some of your biggest ideas come to life. Unleash your garage's full potential with the B4603T Chamberlain Garage Door Opener powered by myQ.

  • Smart control: manage your garage door, monitor activity, and ensure your property is secure from anywhere using the myQ mobile app
  • Integrated LED lighting: advanced, motion-activated lighting targets 1,000 lumens of illumination towards high-traffic areas of the garage, providing optimal visibility, safety, and utility
  • Whisper-quiet operation: open and close your garage door with minimal noise, thanks to an ultra-quiet DC motor and belt drive system, ensuring peaceful garage surroundings
  • Seamless package and grocery delivery: with myQ in-garage delivery partners, enjoy hassle-free deliveries into your garage
  • Simple installation and setup: BILT intelligent instructions provide easy, step-by-step guidance in 3D, so getting set up is a breeze
  • Bluetooth for easy connectivity: integrated Bluetooth technology reduces setup time and makes it easy to connect and start using the myQ app
  • Click here for more information on Electronic Recycling Programs
  • Return Policy
  • California residents
     see Prop 65 WARNINGS
Product ID #: 317896630Internet #: 012381197170Model #: B4603T
caret

Specifications

Dimensions: H 27.9 in, W 13.1 in, D 10 in

Dimensions

Product Depth (in.)10 inProduct Height (in.)27.9 in
Product Width (in.)13.1 inRail Length (ft.)7 ft

Details

Bulb TypeLEDCommercial/ResidentialResidential
Doors Operated by Remote1FeaturesIlluminated Wall Control, Keyless Entry, Lights, Safety sensor, Universal control
Garage Door Opener Horsepower (hp)3/4 hpIncludedHardware, Instructions, Mounted Keypad, Remote Control
Mounting LocationCeiling MountedOpener TypeBelt Drive
Pack Size1 PackProduct TypeWithout Battery Backup
Product Weight (lb.)37.2 lbReturnable90-Day

Warranty / Certifications

Manufacturer WarrantyLifetime motor & drive, 5 year parts, 1 year accessories
caret

Questions & Answers

29Questions
caret
Q:is this the right unit for my aluminum door? which has a measurement of 16 feet wide by 7 feet tall with a 9 foot rail which has a chamberlain chain drive unit already installed please let me know asap
by|Jan 31, 2024
1 Answer
Answer This Question

A:  Hello Charles. You are able to install model B4603T for your 7ft x 16ft garage door. However, although your new garage door opener may appear similar in design to your old opener, our recommendation is that you replace the entire opener. This includes mounting hardware, rails, wired door controls and wireless remote devices.

by|Feb 1, 2024
    caret
    Q:Can B 4603t work without wifi or any smart device ?
    by|Dec 13, 2023
    1 Answer
    Answer This Question

    A:  Hi Bill. Yes, the B4603T can function without a Wi-Fi network. This would only be necessary if you wish to use the myQ app to control your door from your device.

    by|Dec 14, 2023
      caret
      Q:Does this model have a soft start and stop feature?
      by|Dec 11, 2023
      1 Answer
      Answer This Question

      A:  Hi, thank you for your interest in our product. The B4603T is a GDO that should have a soft start feature. If otherwise, you may have to reset the travel. For further help try reaching our tech support side. https://support.chamberlaingroup.com/s/contact-us

      by|Dec 11, 2023
        caret
        Q:Will this model work for a 7 ft garage?
        by|Nov 7, 2023
        1 Answer
        Answer This Question

        A:  Hello. Yes, Chamberlain model B4603T will work on a 7ft standard garage door.

        by|Nov 8, 2023
          Showing 1-4 of 29
          caret

          Customer Reviews

          4.4 out of 5
          • 4.4 out of 96 reviews
          • 72% recommend this product
          Filter by:
          Showing 1-10 of 96 reviews
          Great sleek, and quiet
          [This review was collected as part of a promotion.] This is on of the sleekest garage motor I have ever seen, it its light, and easy to setup. It too me about 30 minutes to setup, but might take a little longer because I did not have to replace a few parts. It is quiet when operating, and work like it should. The only gripe I have, which is not a dealbreaker is that I'm not a fan of integrated LEDS, but the light works great, and I wish it had a second light, and a backup battery, but overall a great garage opener.
          by
            • Recommended
            A good soft-close door opener
            [This review was collected as part of a promotion.] Overall i really like this opener. It is very quiet, and the slow start and gentle finish features add to its appeal. I like the motion sensor on the wall switch, which makes it so i dont have to turn on other lights when I go to my car. Installation was relatively easy, and I would have given it five stars, except when i first plugged it in, nothing happened. I contacted Chamberlain tech support and, when i finally connected with the correct technician for this opener, they walked me through the process of troubleshooting it. Unfortunately, a wire connection, a simple spade terminal, had come loose during shipping. When I reconnected the wire to the terminal, the opener worked flawlessly. I ended up having to squeeze the connected wire's terminal to make sure it would stay. Another thing I really like about the opener is the bright LED light, but I do think it would be better if it had lights on both ends.
            by
              • Recommended
              Outstanding new innovation from Chamberlain!! A++
              [This review was collected as part of a promotion.] BEST Opener I've ever had...I’ve already recommended it to my brother who has an opener that’s on its last legs. The instructions were clear and easy to follow, especially with the new BILT 3D instructions available using the provided 2D bar code access. Best to have help, but was still safe and easy enough to install and set up by myself. I was able to follow the directions to use supports such as a step ladder to hold the opener motor unit in place while setting up proper final installation position. Installing in a garage after removing an older door opener made it even easier, especially with mounting brackets and all wiring ready to go! Even the Door Control Panel mounting screw positions matched up, and no new drilling or wall anchors were needed. Same with the old keypad remote… Can’t hate that. I like the integrated MyQ functionality eliminating the need for a MyQ hub I’ve had for use with other brand openers. It’s easy to forget pressing a remote control button to close the door that you think of a few blocks or even miles later, and with the ability to remotely check the status and safely command the door down if needed from your phone, it’s a true piece of mind feature! Integrating my existing garage camera was also very easy. One of my favorite features beyond the quiet, elegant operation is the dampening slower movement of the door as it reaches the end of travel. That is really cool. I’ve always had openers that hit the ground fairly hard and you can see the force push up the opener track a bit. It was also extremely easy to adjust the door end of travel, which I’ve always had trouble getting just right on older openers. The force to close and open is also automatically configured, which was another outstanding new feature! This opener has an attractive design with new LED lighting that is far superior to previous openers I’ve had. Overall it was a great installation replacing an older opener, and I do have some helpful feedback and pictures to share: 1. I could not use the provided door bracket or door arm due to support beam position on the garage door as well as manufacturer recommendation to mount the bracket to the top of the door. However, the existing door bracket and door arm work well with new Chamberlain opener. 2. Did have some minor trouble with determining which safety sensor was the receiver to insure it was not installed in direct sunlight that even tech support was unable to help confirm. Also both sensors were not marked correctly, and one had both labels on it, while the other was unmarked. I pulled the top label off and installed it on what turned out to be the sender. The instructions would be more helpful if they identified which sensor was the receiver so you don't have to switch them later if you guessed wrong... Even BILT did not differentiate, but of course they also mention insuring the receiver is not in direct sunlight. I wouldn’t have had the worst case due to using existing wiring spliced in with wire nuts, but switching sensors where I’d just stapled all the wiring to the walls would be a real pain… 3. The installation went perfect with the safety sensors aligning with no adjustment required; green light came on solid & the only glitch is the instructions which said the amber light in the Door Control Panel would flash; it actually came on solid and has stayed that way. I got lucky in guessing which sensor was the receiver and didn’t have to switch them… 4. I also had a little trouble using the Learn button on the Door Control Panel. The instructions indicate the Learn button press will cause the LED to flash once, then flash once after the second press, and then you can press the desired button on a remote, or enter the code on the remote keypad. I had to use the Learn button on the opener motor unit like the previous steps on older units. I was really looking forward to the convenience Chamberlain engineers have designed in the Door Control Panel. I did discover later that it was just the continuously flashing LED that differed from the instructions, and when I ignored the light flashing, I was able to press the button twice as instructed and then program a remote successfully. 5. Programming remote controls has just not worked as well as the rest of the installation. My vehicle built-in remote control button was not able to be programmed using the Chamberlain handheld remote method but it did work using the motor unit Learn button. 6. Step 9 - Installation instructions indicate the Door Control Panel wires can be indiscriminately attached to the Door Control Panel yet Step 10 does discriminate at the opener motor unit. Most notably, the Door Control Panel unit also has clearly marked Red and White terminals same as the Door Opener unit. The BILT video instructions do make it clear wire color does matter on both ends. 7. The Chamberlain manual and BILT video instructions jump from a door in the up position when connecting the Outer Trolley to the Inner Trolley, and then next depict the door in the down position to instruct the installer to command the door to move up for the first time. That added a little confusion but worked out OK. 8. The motion detecting Door Control Panel is only labeled Sensor- On/Off. It would be better to include the word Motion to help the installer/user understand that it is only the motion sensor that is configurable On or Off. However, that is a huge improvement to older units that did not allow the user to turn off motion sensing. 9. MyQ set up worked OK despite the Door Control Panel flashing light issue but failed to set up on the first attempt. When I pulled the power from my existing MyQ hub the retry was successful and I no longer need to use the hub! Nice!! More comprehensive instructions would provide a step to remove accessories from the existing MyQ hub, then power it off before configuring the MyQ feature on the new door opener. Also a step to delete former accessories like a Chamberlain camera from Bluetooth connection in cell phone settings would be helpful. Otherwise the new set up will fail with the recommendation to remove the item from Bluetooth. I didn’t proactively think of Bluetooth settings, and I thought I should leave the old MyQ hub set up without specific instructions to remove it first.
              by
                • Recommended
                Tech support in USA was very helpful Out of country left an awful lot to be desired
                by
                • Verified Purchase
                I had the installation done by Home Depot and it was very well done. The installer did an excellent job and answered all my questions. The product is very silent compared to my 30 year old Genie!
                by
                • Verified Purchase
                So cheap that it comes without install instructions
                They expect you to have a smart phone to look up the instructions. How much could it cost you to provide them?
                by
                Response from TheChamberlainTeamJan 30, 2024
                Hello Srsmeagol, We are sorry to hear about your experience. Should you have any questions about our products in the future, please email social@chamberlain.com. Thank you. Chamberlain-DIY
                  • Recommended
                  Replacing a jackshaft / side mount opener
                  I bought this to replace a Chamberlin side mount opener. I needed an opener to push the center of the door tight so it would shut. Installation and assembly was super easy. Programming was typical of these openers. I always feel surprised when I get it correctly and it works. I can't speak to the app, I have no intrest in it. The light on this is a high color tempeture and really does not light up the space well at all. My old one that you put bulbs in was 1000% times better. I honesly hate the light on this and would love if there was a way to change it from the annoying white/blue light to something easier on the eyes. It casts shadows and is poor in my opinion.
                  by
                  Response from TSC Technical SupportJan 18, 2024
                  Hello Paul, thank you for your review and feedback on the B4603TMC. I am sorry to hear of your experience and that it did not meet your expectations. I will be sure to share your feedback with our product team for future enhancements. Should you need further help, have any comments, concerns or questions feel free to contact customer support through https://support.chamberlaingroup.com/s/contact-us
                    by
                    • Verified Purchase
                    by
                    • Verified Purchase
                    Chamberlain B4603T
                    The system operates smoothly and quietly. The 3D installation instructions are beyond stellar. very happy with the modern conveniences associated with this newer system. I replaced a 20-year-old system with this one
                    by
                      Showing 1-10 of 96 reviews

                      Compare Similar Items

                      current item

                      Garage Door Opener Horsepower (hp)

                      3/4 hp

                      1 1/4 hp

                      3/4 hp

                      Opener Type

                      Belt Drive

                      Belt Drive, Smart

                      Belt Drive, Smart

                      Wall Mount

                      Features

                      Illuminated Wall Control, Keyless Entry, Lights, Safety sensor, Universal control

                      Battery Backup Function, Keyless Entry, Lights, Manual Release Handle, Rolling code technology, Wireless keypad

                      Battery Backup Function, Motion Activated Light, Safety sensor, Wireless keypad

                      Battery Backup Function

                      Included

                      Hardware, Instructions, Mounted Keypad, Remote Control

                      Batteries, Hardware, Instructions, Mounted Keypad, Remote Control

                      Batteries, Instructions, Remote Control

                      Batteries, Hardware, Instructions, Remote Control

                      Works With

                      Alexa, Alexa, Control4, Google, Google Assistant, Samsung SmartThings

                      Proprietary App

                      Alexa, Alexa, Google Assistant, Proprietary App, Samsung SmartThings