#1 Home Improvement Retailer

Internet #300869661

Model #100376

Store SO SKU #1002241112

Storm Shield Severe Weather Portable Generator Cover by GenTent for 3000 to 10,000-Watts Generators

  • Self attaching design installs without the need for tools
  • Safely operate your generator without the threat of CO poisoning
  • Waterproof cover is designed to withstand wind, snow and rain
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

The Champion Power Equipment 100376 Storm Shield Severe Weather Portable Generator Cover by GenTent with self-attaching, tool less installation is designed for Champion portable generators from 3000-Watt to 10,000-Watt, and allows you to operate your generator safely outside in nearly any type of weather. Adapter kits for inverters are available from GenTent. This generator cover has an innovative self-attaching design and installs easily in three simple steps with no tools necessary. The high-strength clamps and fiberglass frame rods connect directly to the generator, while the detachable wrap-around electrical panel skirt keeps your outlets covered and dry while in use. The Storm Shield cover has the ability to withstand winds up to 70 mph, snow loads up to 18 in. and rain up to 12 in. per day. The cover allows you to avoid the dangers of CO poisoning, electrocution and generator damage. The self-attaching design of the cover allows the generator to maintain its natural cooling airflow and mobility. Featuring a large refueling door, you can easily refuel your generator in seconds with no need to disassemble or remove the cover. With independent, third party testing and thousands of hours of real world experience, the Storm Shield is designed to perform in some of the most severe weather conditions. Champion Support and our nationwide network of service centers will back up your purchase with a 1-year limited warranty and free lifetime technical support.
  • Installs easily in 3 simple steps with its self-attaching design
  • The large refueling door and natural airflow design allows for generator operation and maintenance while the cover is on
  • Operate your 3000-Watt to 10,000-Watt generator safely while avoiding CO poisoning, electrocution and generator damage
  • The waterproof cover includes high-strength frame rods designed to withstand winds up to 70 mph, snow loads up to 18 in. and rain up to 12 in. per day
  • Includes 1-year limited warranty with free lifetime technical support from dedicated experts
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
36
Product Height (in.)
18
Product Width (in.)
24

Details

Electrical Product Type
Generator Accessory
Generator Accessory Type
Generator Cover
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
1-Year Limited Warranty

Questions & Answers

92Questions10Answers

Which storm shield severe will fit 200993 4650

Asked by Jimmystevens1 June 20, 2021
0
Answers

Will this fit Champion 100899 Dual Fuel 2500W inverter generator?

Asked by BC June 18, 2021
2
Answers

Mine is on a mod100263, 3500watt (running) inverter. It is a gas or lpg unit. It has an elastic cord at the bottom so at worst it might be a hair big for the small unit but I doubt that it would be too small. You might look up the actual physical dimensions for both of those units and see if they match or are close in size. If home depot is not listing alternate sizes I would buy one and if it doesn't fit return it. Hope that helps.

does this fit model 200994

Asked by CaliGirl June 15, 2021
1
Answer

Yes, this Storm Shield is the recommended fit for the 200994. Thank you.

Will this fit my champion 6900starting/5500 running watts dual fuel generator

Asked by Mjs February 1, 2021
1
Answer

No, this storm shield is designed to strictly fit inverter generators. Based off the wattage that you provided of your generator, you will require storm shield model 100376. Thank you.

Will this fit an ez 4650 Champion inverter portable generator

Asked by Robert February 1, 2021
1
Answer

Please send us an email with your exact model, and refer to this same question to allow us to answer your question accurately. We can be reached at support@cpeauto.com.

Will this cover affect models with a CO monitor?

Asked by Johnny November 9, 2020
1
Answer

no make sure you run it outside

Will the Storm Shield help muffle the noise/nearby decibel reading of the generator? I've ordered...

Asked by SBall November 1, 2020
1
Answer

Sorry, it is not likely you will experience a noticeable change in sound level during operation.

Will this fit inverter generator?

Asked by DanD October 7, 2020
1
Answer

Yes, the 100376 Storm Shield will fit the 100520 inverter. Thank you.

will this fit the champion 8750 watt inverter generator

Asked by KAS September 21, 2020
1
Answer

Unfortunately this storm shield is too small, and will require model 100376. Thank you.

This fit in Model # 100889 (Champion Inverter 2,500 watts)?

Asked by Jose September 9, 2020
1
Answer

Yes, it fit mine. Keeps the dust off in the Garage, and in the back of my truck.

Storm Shield Severe Weather Portable Generator Cover by GenTent for 3000 to 10,000-Watts Generators - page 2

Customer Reviews

  • 4.7
    out of 720 reviews
  • 98% recommend this product
Filter by:
Showing 1-10 of 720 reviews
So far so good
Product seems well built and I'm pleased so fair however; the direction manual diagrams are not helpful and add to that Champion has made the decision to send some different parts then what the manual states which is confusing. I had to call customer service and was told they are aware of that, they just hadn't updated the manual and it will get fixed "some day". That aside, the product itself looks good.
by Tac48706
Should be very useful!
Received the storm shield and assembled it for n my champion 3400 inverter generator without too much problem. Next time will be much quicker. I am impressed so far with the fit and finish of the storm shield . Should make using my generator in bad weather much safer ! Would recommend
by Bgp
Fantastic cover!
Very well made, installs in less than 10 minutes and seems like it will protect my brand new Champion generator from the rain. I am so happy I decided to buy this cover along with the gray permanent cover.
by Petko
Decently designed cover system
I have not used the cover yet to keep the generator dry but I installed the brackets so I am ready when the time comes. Overall it is a decently designed cover system but I struggled with the rubber sleeves and clamps that hold the fiberglass rods. The sleeves/clamps fit fairly loosely so they can slide down the generator frame with low-to-moderate force or they may vibrate downward in use (but this has not been tested). I tried to tighten the fit with a piece of inner tube but it didn't really help. I decided to place some hose clamps beneath each sleeve/clamp to keep them at the intended height. A small degree of looseness is desirable because it allows the clamps to be pivoted inward so they are flush with the generator when not needed. The arms and clamps are plastic so I have some concern about their longevity. Finally, I had to make a notch in a heatshield to allow the sleeve/clamp to be positioned at the recommended height but this is not a shortcoming of the cover system.
by Atrain
Excellent cover for my Champion generator
I purchased this storm cover for my Champion Power Equipment 76533 4750/3800-Watt Dual Fuel RV Ready Portable Generator. It fitted perfectly and it was VERY simple to install it. I fully recommend it.
by YacoCars
Good fit - install was easy
The cover has been installed without issue, directions were clear and provided illustrations were helpful. The product, although not tested in adverse weather yet, appears to be appropriate to protect the generator under those conditions.
by Lawson
Perfect Cover
Works as expect. Perfect size for my generator. Although, I didn’t purchase a champion generator. The curated suggestions listed under the generator I purchased suggested this cover. Well, the suggestion was spot on
by nestes82
Champion, bon storm shield
Very good product , i like it
by Yvan
Staying Dry
The cover is a little pricey but seems to do the job. Easy to install EXCEPT the brackets will slide. The install manual said not to use the included rubber sleeves for 1.5 diameter frames (my case). I went ahead and used the rubber sleeves and this solved the sliding bracket problem. The older version of the install manual found on the Champion site has the following info: TIP: For 1.5 in. (3.8 cm) frames, apply electrical tape to the frame where the clamp will connect for added grip. Contact support for other options should you need more grip on 1.5 in. (3.8 cm) frames.
by In The Lou
Peace of mind
We bought a new Champion Generator and quickly learned that we would need a cover. The cover is easy to assemble and provides excellent protection from the elements.
by CamJam
Showing 1-10 of 720 reviews