Chaucer 12 in. x 12 in. Resilient Vinyl Tile Flooring (45 sq. ft. / case)

45

Thank you for reaching out to us with your question. I apologize for the inconvenience; however, we do not recommend using any additional adhesive with our peel and stick tile. Peel and stick tiles need to be installed on a clean, flat, smooth surface. It needs to be rolled thoroughly with a roller after installation. I have included a link to our installation instructions below. Peel and stick tile can be installed over existing vinyl and ceramic flooring, but not over hardwood flooring. Existing vinyl flooring needs to be a single layer of non-cushioned flooring, fully glued down, clean and free of waxes and polishes, and is flat and smooth (vinyl tile can only be installed over on grade or above). Any texturing will need to be smoothed over with S-194 Patch, Underlayment & Embossing Leveler mixed with the S-195 Underlayment Additive. Ceramic tile must be firmly bonded, clean, dry and dust-free. Check for cracks, scaling, levelness, and other damage. Grout lines and other texture on the ceramic will need to be leveled with S-184 Patch & Skim Coat or S-194 Patch, Underlayment & Embossing Leveler mixed with the S-195 Underlayment Additive. I hope this information is helpful. Have a great day. https://sforce.co/2E96s5E

Yes! You may lay it with no problems, provided it isn't going to be exposed to direct water.

Yes you can

Good afternoon. Thank you for reaching out to us with your question. There are 45 pieces of flooring per carton for a total of 45 square feet. I hope this information is helpful. Have a great day.

Yes you have to buy a whole box which means you'll have 30 tiles left. You may get lucky if they have some loose ones laying around!

Good morning. Thank you for reaching out to us with your question. Yes, this flooring can be used in any room in the home. I hope this information is helpful. Have a great day.

Good morning. Thank you for reaching out to us with your question. I apologize for the inconvenience; however, we do not recommend the use of additional adhesive with peel and stick tile. The important thing with peel and stick tile is to have a clean, flat, smooth surface to install over, and to roll the tile thoroughly with a roller after installation. Here is a link to the installation instructions for peel and stick tile. https://sforce.co/2E96s5E Peel and stick tile can be installed over existing vinyl and ceramic flooring, not over hardwood flooring. Existing vinyl flooring needs to be a single layer of non-cushioned flooring, fully glued down, clean and free of waxes and polishes, and is flat and smooth (vinyl tile can only be instaklled over on grade or above). Any texturing will need to be smoothed over with S-194 Patch, Underlayment & Embossing Leveler mixed with the S-195 Underlayment Additive. Ceramic tile must be firmly bonded, clean, dry and dust-free. Check for cracks, scaling, levelness, and other damage. Grout lines and other texture on the ceramic will need to be leveled with S-184 Patch & Skim Coat or S-194 Patch, Underlayment & Embossing Leveler mixed with the S-195 Underlayment Additive. I hope this information is helpful. Have a great day.

I used mine on an outdoor patio and it's held up fine for over a year. As long as you don't flood the bathroom floor, you'll be fine!

I ordered mine to the store. They arrived 24 hours after for curbside pick up.