Universal Snow Blower Cab

It fits fine on my 3 stage Cub, not sure why number of stages matters. Assembling this couldn't be much more of a pain to deal with. The poles provided do not stay together and they fall apart when you're trying to set it up. No matter how hard I pushed, they still fell apart. They should have just provided tent poles (with the elastic inside so they're always connected and you just put them together) instead, they provide different size poles that a pain to deal with. What's worse, when not in use it will not fit in a standard shed without being removed and the cab itself takes up a lot of space. I normally would just disassemble it but since it's such a pain to put together I'd rather take up all the shed space than deal with trying to put it together it during a storm. The mounting brackets actually work well and they also provide a height extension poles which have push buttons that don't exactly line up so it's a pain to connect and disconnect them. I needed the extensions because the angle of the cab hits my head unless I tilt it way too far forward. The fabric/vinyl shield has already started to tear because of the stress of the poles. This is unacceptable since I haven't even had a chance to use it during a snowstorm. I can only imagine what will happen under high winds. Overall I cannot recommend this product due to poor ease of use, questionable quality and overall frustration.

GREAT PRODUCT, EASY TO PUT ON AND TAKE OFF,AND WITH A LITTLE MODIFICATION, I WAS ABLE TO ADAPT IT TO MY WIFE'S HONDA SNOW BLOWER. IT WAS ONE OF THE LIGHTEST CABS AVAILABLE, AND BEST VALUE FOR THE PRICE,AND FREE SHIPPING TO THE HOUSE. ONLY DOWN SIDE IS, YOU NEED TO PULL-DOWN ON THE CAB BY HAND, TO BACK IT INTO THE SHED THRU THE GARAGE DOOR, BECAUSE IT'S TO HIGH [ABOUT 2-21/2" ], TO HI, BUT IT FLEXES DOWN EASILY 3" ENOUGH CLEARANCE TO ALLOW BACKING IN ,AS LONG AS YOU REMEMBER TO PULL IT DOWN!!! IF YOU DO NOT, SOMETHING IS GOING TO GET RIPPED OR BROKEN, BUT I LIKE IT AT THIS HEIGHT BECAUSE I AM 6' -3" AND MY HEAD CLEARS INSIDE THE CAB, WITHOUT ME HUNCHING OVER, TO FIT UNDER IT. I AM SURE THE CAB CAN BE LOWERED IF NEEDED.GREATEST PART ABOUT THE CAB, YOU STAY DRYER AND WARMER WHEN BLOWING SNOW, REGARDLESS OF WHICH WAY THE WIND IS BLOWING THE SNOW!!

Doesn’t tighten up like it should

Can’t keep it in a upright position when using clamps won’t squeeze the cross bar tight enough had to redesign the bar to make it work correctly

Cab would not tighten to tubes supplied with clamps supplied.Called company and they sent filler tape so clamps would tighten. Very poor temp.fix!

This was not what was expected. Horrible to put together as the pieces given did not bend or work, and had to use different tools than provide to attach onto the blower. Definitely not universal.

Not bad overall, but the directions are limited. The base frame in not universal as far as the top & bottom. One set of legs has spring buttons & the other set doesn't. I first assembled it as I thought it should be, only to discover the plastic material ended up too short & the velcro straps would wrap around the frame rails. The clamp brackets for holding the canopy are apparently designed to allow swiveling the cab in a folding up or down conversion. It sat on my head & was very annoying. I removed one set of the bracket clams & assembled it to be tight in a straight up position. Overall, I suppose it's okay for a cheap Chinese made cab, but they really need a more detailed set of assembly instructions.

Very hard to assemble onto snowblower. Definitely not universal for every machine.

Absolutely awful product.

Says it's "Universal" but it didn't work with our snowblower.